Sponsored Content
Operating Systems Solaris start /SP/console hangs in X4500 Post 302258679 by DukeNuke2 on Saturday 15th of November 2008 10:50:09 AM
Old 11-15-2008
as allready mentioned above:

X systems DON'T have a serial console! you can try this as long as you like... cause there is NO serial console they invented the virtual kvm switch in the X systems hardware. all you need is a browser with access to the ilom.

i haven't tried to disable the gdm/cde displaymanager and check if i have a serial console after that. but you can try this out...
look with "svcs -a | grep -i login" for the smf that you need to disable and afterwards disable it with "svcadm disable smf".
 

10 More Discussions You Might Find Interesting

1. HP-UX

serial console hangs

I have a HP Visualize C200 running hpux that I am trying to boot into using a null modem through com1 from my Sun Ultra 10. I get all the way to the login prompt and then it becomes innactive and wont let me access the machine anymore. Any ideas? (2 Replies)
Discussion started by: trajek
2 Replies

2. Solaris

script hangs when outputing to /dev/console

I am running solaris 8 on a sparcs box. The system is connected to a lightwave console server. I have a script that hangs when sending output to '/dev/console'. Any ideas? -V (2 Replies)
Discussion started by: vada010
2 Replies

3. Solaris

Not able to start /SP/console

Dear All, Does anyone has any clue for the errors below? I have tried resetting the ILOM but to no avail. No luck in locating /var/lock either. *** Problem encountered thru NetManagement port. Not able to try it out using console yet. -> start /SP/console Are you sure you want... (3 Replies)
Discussion started by: honmin
3 Replies

4. AIX

SSH login hangs, serial console works

Server, running AIX 6.1 developed strange problem when logging in via SSH -- ssh client hangs without any error. It is possible to run commands on server, using ssh ("ssh servername ls -l" is OK) It is possible to log in normally, using serial console connected to server. It was possible to... (2 Replies)
Discussion started by: ivar.zarans
2 Replies

5. Solaris

How to start system console in ELOM?

Hi, The system is Sun x4150. I use putty ssh to access to it. I can't start system console: (hung) Any help will be greatly appreciated! (5 Replies)
Discussion started by: aixlover
5 Replies

6. AIX

NIM Restore hangs at the start

Hello Gurus, I have a couple of questions, I'm trying to do a mksysb restore from backup and it has just hung at the start. RS/6000 Firmware Version TCP05287 (c) Copyright IBM Corp. 2000 All rights reserved. -------------------------------------------------------------------------------... (8 Replies)
Discussion started by: elcounto
8 Replies

7. Solaris

Unable to start webconsole:console

Here is issue... bash-3.00# svcs system/webconsole:console STATE STIME FMRI maintenance 1:15:54 svc:/system/webconsole:console bash-3.00# svcadm clear svc:/system/webconsole:console bash-3.00# svcs -a |grep /system/webconsole offline* 1:20:44... (0 Replies)
Discussion started by: lingeshwaran
0 Replies

8. Solaris

How to start up console on Sun Fire X2200 ILOM using SSH?

Hi Oracle Hardware Specialists, I have shutdown a Sun Fire X2200 server running Solaris 10 x86 to single user mode to experiment some backup commands using Web based Sun embedded Lights Out Manager Redirection to open up a console session. However, it is not possible to copy & past text with... (7 Replies)
Discussion started by: gjackson123
7 Replies

9. Solaris

Start /SP/console freezes on x4150

Hi I have a server previously configured, that was given to me, but on attempt to start the console, it hangs. firstly I did: start /SYS them: start /SP/console then it says that its starting, but nothing happens....waited and waited Can you give me hint (5 Replies)
Discussion started by: fretagi
5 Replies

10. UNIX for Beginners Questions & Answers

Howto auto boot SPARC | How to auto supply "start /SYS" and "start /SP/console" commands

When I power ON my T4-1, I got a prompt -> where I have to start /SYS and start /SP/console. How can I auto supply these two commands ? (3 Replies)
Discussion started by: z_haseeb
3 Replies
cvcd(1M)                                                  System Administration Commands                                                  cvcd(1M)

NAME
cvcd - virtual console daemon SYNOPSIS
/platform/platform_name/cvcd DESCRIPTION
The virtual console daemon, cvcd, is a server process that supports the network console provided on some platforms. The cvcd daemon accepts network console connections from a remote host (only one host at any given time). Console input is read from this connection and forwarded to cvc(7D) by way of cvcredir(7D). Similarly, console output is read from cvcredir(7D) and forwarded across the network console connection. If cvcd dies, console traffic is automatically rerouted through an internal hardware interface. The cvcd daemon normally starts at system boot time. Each domain supports only one cvcd process at a time. Caution: On Sun Enterprise 10000 domains, cvcd uses a configuration file (/etc/ssphostname) to determine the name of the host from which network console connections are allowed. If the remote console host is renamed, you must edit the configuration file to reflect that change. OPERANDS
The following operands are supported: platform_name The official Sun platform name used in packaging and code. For example, for Sun Fire 15K servers, the platform_name would be SUNW,Sun-Fire-15000. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |Sun Enterprise 10000 | | |servers, Sun Fire High-End | | |Systems | +-----------------------------+-----------------------------+ |Availability |SUNWcvc.u | +-----------------------------+-----------------------------+ SEE ALSO
svcs(1), svcadm(1M), services(4), attributes(5), smf(5), cvc(7D), cvcredir(7D) Sun Enterprise 10000 SSP Reference Manual System Management Services (SMS) Reference Manual NOTES
The cvcd service is managed by the service management facility, smf(5), under the service identifier: svc:/system/cvc Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser- vice's status can be queried using the svcs(1) command. SunOS 5.10 11 Aug 2004 cvcd(1M)
All times are GMT -4. The time now is 03:01 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy