11-15-2008
as allready mentioned above:
X systems DON'T have a serial console! you can try this as long as you like... cause there is NO serial console they invented the virtual kvm switch in the X systems hardware. all you need is a browser with access to the ilom.
i haven't tried to disable the gdm/cde displaymanager and check if i have a serial console after that. but you can try this out...
look with "svcs -a | grep -i login" for the smf that you need to disable and afterwards disable it with "svcadm disable smf".
10 More Discussions You Might Find Interesting
1. HP-UX
I have a HP Visualize C200 running hpux that I am trying to boot into using a null modem through com1 from my Sun Ultra 10. I get all the way to the login prompt and then it becomes innactive and wont let me access the machine anymore. Any ideas? (2 Replies)
Discussion started by: trajek
2 Replies
2. Solaris
I am running solaris 8 on a sparcs box. The system is connected to a lightwave console server. I have a script that hangs when sending output to '/dev/console'. Any ideas?
-V (2 Replies)
Discussion started by: vada010
2 Replies
3. Solaris
Dear All,
Does anyone has any clue for the errors below? I have tried resetting the ILOM but to no avail. No luck in locating /var/lock either.
*** Problem encountered thru NetManagement port. Not able to try it out using console yet.
-> start /SP/console
Are you sure you want... (3 Replies)
Discussion started by: honmin
3 Replies
4. AIX
Server, running AIX 6.1 developed strange problem when logging in via SSH -- ssh client hangs without any error.
It is possible to run commands on server, using ssh ("ssh servername ls -l" is OK)
It is possible to log in normally, using serial console connected to server.
It was possible to... (2 Replies)
Discussion started by: ivar.zarans
2 Replies
5. Solaris
Hi, The system is Sun x4150. I use putty ssh to access to it. I can't start system console:
(hung)
Any help will be greatly appreciated! (5 Replies)
Discussion started by: aixlover
5 Replies
6. AIX
Hello Gurus,
I have a couple of questions, I'm trying to do a mksysb restore from backup and it has just hung at the start.
RS/6000 Firmware
Version TCP05287
(c) Copyright IBM Corp. 2000 All rights reserved.
-------------------------------------------------------------------------------... (8 Replies)
Discussion started by: elcounto
8 Replies
7. Solaris
Here is issue...
bash-3.00# svcs system/webconsole:console
STATE STIME FMRI
maintenance 1:15:54 svc:/system/webconsole:console
bash-3.00# svcadm clear svc:/system/webconsole:console
bash-3.00# svcs -a |grep /system/webconsole
offline* 1:20:44... (0 Replies)
Discussion started by: lingeshwaran
0 Replies
8. Solaris
Hi Oracle Hardware Specialists,
I have shutdown a Sun Fire X2200 server running Solaris 10 x86 to single user mode to experiment some backup commands using Web based Sun embedded Lights Out Manager Redirection to open up a console session. However, it is not possible to copy & past text with... (7 Replies)
Discussion started by: gjackson123
7 Replies
9. Solaris
Hi
I have a server previously configured, that was given to me, but on attempt to start the console, it hangs.
firstly I did:
start /SYS
them:
start /SP/console
then it says that its starting, but nothing happens....waited and waited
Can you give me hint (5 Replies)
Discussion started by: fretagi
5 Replies
10. UNIX for Beginners Questions & Answers
When I power ON my T4-1, I got a prompt -> where I have to start /SYS and start /SP/console. How can I auto supply these two commands ? (3 Replies)
Discussion started by: z_haseeb
3 Replies
dc(7) Miscellaneous Information Manual dc(7)
NAME
dc - serial line/mouse/keyboard
SYNOPSIS
controller dc0 at ibus0 slot 0 vector dcintr
DESCRIPTION
The dc serial line controller provides DECstation 2100, DECstation 3100, DECstation 5000, and DECstation 5100 computer systems with key-
board, mouse, and serial communications interfaces. The serial communications interfaces on the DECstation 2100 and DECstation 3100 provide
partial modem control. The serial communications interfaces on the DECstation 5000 provide full modem control. The device special file
/dev/tty01 on a DECstation 5100 provides full modem control, while the remaining ports provide no modem control at all. All serial commu-
nications interfaces operate at baud rates from B50 to B9600, excluding B200.
The dc ports are used as follows: Usage Graphics device keyboard at 4800 BPS Mouse or tablet at 4800 BPS Communications port 1 (w/modem
control)/local terminal Communications port 2 (w/modem control)/local terminal
On all systems except the DECstation 5100, serial port 2 is used for the system console port in server (that is, non-graphics) configura-
tions. On DECstation 5100s, the serial port labeled 3 on the back of the system is always the system console port. The serial system con-
sole port always operates at 9600 BPS, 8-bits, no parity; modem control is not supported.
RESTRICTIONS
Data communications equipment attached to the console serial port in server configurations must be set to 9600 BPS, 8-bits, no parity. The
scc driver enforces this restriction.
FILES
console terminal local terminal local terminal local terminal (DECstation 5100 only)
RELATED INFORMATION
console(7), devio(7), tty(7), MAKEDEV(8) delim off
dc(7)