problem with kernel module loading Post: 302255860

10 More Discussions You Might Find Interesting

1. Programming

Dynamically loading a module

Hi there: Thanks for clicking in first. I have a question here. I have a module that needs to be dynamically loaded when another piece of code needs it at runtime. I know that I will have to make a soname file before I can use it dynamically. My question is what commad I should use to make...

2. SuSE

max number of slabs per kernel module (kernel 2.6.17, suse)

Hi All, Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff. Cheers, Brendan

3. Red Hat

Problem with kernel-module-ntfs

Hi All Im trying to access the my windows XP NTFS from Redhat linux 4.0 Enterprise edition I have downloaded the respective rpm And im able to install it successfully Then i have given the following command , but got an error Here are my partitions And when i give the below...

4. Linux

How to convert Linux Kernel built-in module into a loadable module

Hi all, I am working on USB data monitoring on Fedora Core 9. Kernel 2.6.25 has a built-in module (the one that isn't loadable, but compiles and links statically with the kernel during compilation) to snoop USB data. It is in <kernel_source_code>/drivers/usb/mon/. I need to know if I can...

5. UNIX for Advanced & Expert Users

Kernel module compilation problem

I have one big module 2.6.18 kernel mod.c I want to divide this to several files. The problem is to write right Makefile lib1.h lib1.c mod.c mod.c works fine normally but when I divide into several files and try to compile with this makefile obj-m := mod.o mod-objs := lib1.o ...

6. Shell Programming and Scripting

Perl - Error loading module.

Hi, I have a strange issue in my script. When script is run from command prompt it runs fine,but when run from cron it exist with error message. I narrowed down the issue and found that " use Mail::Sender;" is the culprit. If I comment the statment the code runs fine in both command and...

7. Solaris

Loading Kernel module at boot

Is there any link/tutorial on loading Solaris kernel modules at boot time??

8. UNIX for Advanced & Expert Users

Problem loading cpufreq module

I'd like to install cpufreq modules on my server . I tried sudo modprobe acpi-cpufreq but got the error FATAL: Error inserting acpi_cpufreq (/lib/modules/2.6.18-238.12.1.el5xen/kernel/arch/x86_64/kernel/cpufreq/acpi-cpufreq.ko): No such device cat /proc/cpuinfo gives this ...

9. Linux

Unload kernel module at boot time (Debian Wheezy 7.2, 3.2.0-4-686-pae kernel)

Hi everyone, I am trying to prevent the ehci_hcd kernel module to load at boot time. Here's what I've tried so far: 1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here): 2) Blacklisted the module by adding the following string to 3) Tried to blacklist the module...

10. Fedora

Nvidia Module Not Loading (Desktop Gone)

Well, I followed the steps in the Debian wiki here to install the drivers for the following video card: $ lspci | grep VGA 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 (rev a1)I confirmed the correct driver is installed. As you probably see I've tried this a few times and a few...

LEARN ABOUT OPENDARWIN

rmmod

RMMOD(8)							       rmmod								  RMMOD(8)

NAME

       rmmod - Simple program to remove a module from the Linux Kernel

SYNOPSIS

       rmmod [-f] [-s] [-v] [modulename]

DESCRIPTION

       rmmod is a trivial program to remove a module (when module unloading support is provided) from the kernel. Most users will want to use
       modprobe(8) with the -r option instead.

OPTIONS

       -v, --verbose
	   Print messages about what the program is doing. Usually rmmod prints messages only if something goes wrong.

       -f, --force
	   This option can be extremely dangerous: it has no effect unless CONFIG_MODULE_FORCE_UNLOAD was set when the kernel was compiled. With
	   this option, you can remove modules which are being used, or which are not designed to be removed, or have been marked as unsafe (see
	   lsmod(8)).

       -s, --syslog
	   Send errors to syslog instead of standard error.

       -V --version
	   Show version of program and exit.

COPYRIGHT

       This manual page originally Copyright 2002, Rusty Russell, IBM Corporation. Maintained by Jon Masters and others.

SEE ALSO

       modprobe(8), insmod(8), lsmod(8), modinfo(8)

AUTHORS

       Jon Masters <jcm@jonmasters.org>
	   Developer

       Lucas De Marchi <lucas.de.marchi@gmail.com>
	   Developer

kmod								    01/28/2018								  RMMOD(8)

10 More Discussions You Might Find Interesting

1. Programming

Dynamically loading a module

Discussion started by: yanhu

2. SuSE

max number of slabs per kernel module (kernel 2.6.17, suse)

Discussion started by: Brendan Kennedy

3. Red Hat

Problem with kernel-module-ntfs

Discussion started by: balumankala

4. Linux

How to convert Linux Kernel built-in module into a loadable module

Discussion started by: anitemp