11-05-2008
the 9600 8n1 setting works fine for me with putty. have you downloaded the latest version of putty or redownloaded putty? maybe your putty has some problems...
10 More Discussions You Might Find Interesting
1. Linux
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
Discussion started by: jshoovie
2 Replies
2. UNIX for Dummies Questions & Answers
hi all,
i've got an old PC with unix (SCO System V/386 rel. 3.2) on it.
Pentium I; 128mb; ISA 2-port RS232 serial adapter card for an oki dot-matrix printer. (no usb, no CD)
i've been running an old cobol program to do some invoicing and print reports.
some time back i changed the... (0 Replies)
Discussion started by: frankpky
0 Replies
3. SCO
According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser*
Problem is that when I go to mkdev serial, it is not there.
Anyone... (1 Reply)
Discussion started by: jn5519
1 Replies
4. Solaris
Hi all,
I must connect my PC (Windows 2000) to Sun Enterprise 450 (4 X UltraSPARC-II 400Mhz) for Solaris 10 Installation. My PC doesn't have a serial port therefore I must use USB port.
How can I connect USB port of my PC to the serial port (DB 25) of Sun 450?
Will be there any problems with... (3 Replies)
Discussion started by: Sunb3
3 Replies
5. UNIX for Dummies Questions & Answers
Hi iam new bie to unix.
we are getting the sensor positional values on hyperterminal(UART).but
our task is to use this data for mouse movement.so wat we hav to do ??
is this required to change usb driver cud u send info regarding my query??
Thanks in advance :) :) :) (1 Reply)
Discussion started by: jayakar
1 Replies
6. IP Networking
i have wireless usb adapter rtl8187 from micromax company
my proplem is the signal is very weak and i cannot open website
can i increase the signal ?
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0... (5 Replies)
Discussion started by: rsd220
5 Replies
7. Solaris
Hi,
i try to plug in my USB wireless adapter to my sun solaris server. However, it cannot detect it. How do i set it so that it can detect it? (1 Reply)
Discussion started by: lkyow
1 Replies
8. Hardware
Hi Gurus of Unix
Recently I install a OpenSolaris in My HP 530
In this moment want to install a USB-A to Serial Cable. Any guru can send a Link where I can use how reference.
I want to configure a Router and my PC don't have any serial Port.
My LapTOP only has USB ports. In this case I buy a... (2 Replies)
Discussion started by: andresguillen
2 Replies
9. Solaris
In ubuntu etopic i create this udev rules for prolink 3g usb modem:
SUBSYSTEM=="block",
SUBSYSTEM=="scsi",
ATTRS{idVendor}=="1e0e",
ATTRS{idProduct}=="f000",
ACTION=="add",
RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000"
After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Discussion started by: shamsat
4 Replies
10. Linux
I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
Discussion started by: rbatte1
7 Replies
LEARN ABOUT DEBIAN
openpgp2ssh
OPENPGP2SSH(1) BSD General Commands Manual OPENPGP2SSH(1)
NAME
openpgp2ssh -- translate OpenPGP keys to SSH keys
SYNOPSIS
openpgp2ssh < mykey.gpg
gpg --export $KEYID | openpgp2ssh $KEYID
gpg --export-secret-key $KEYID | openpgp2ssh $KEYID
DESCRIPTION
openpgp2ssh takes an OpenPGP-formatted primary key and associated subkeys on standard input, and spits out the requested equivalent SSH-style
key on standard output.
If the data on standard input contains no subkeys, you can invoke openpgp2ssh without arguments. If the data on standard input contains mul-
tiple keys (e.g. a primary key and associated subkeys), you must specify a specific OpenPGP key identifier as the first argument to indicate
which key to export. The key ID is normally the 40 hex digit OpenPGP fingerprint of the key or subkey desired, but openpgp2ssh will accept
as few as the last 8 digits of the fingerprint as a key ID.
If the input contains an OpenPGP RSA public key, it will be converted to the OpenSSH-style single-line keystring, prefixed with the key type
(`ssh-rsa'). This format is suitable (with minor alterations) for insertion into known_hosts files and authorized_keys files.
If the input contains an OpenPGP RSA secret key, it will be converted to the equivalent PEM-encoded private key.
openpgp2ssh is part of the monkeysphere(7) framework for providing a PKI for SSH.
CAVEATS
The keys produced by this process are stripped of all identifying information, including certifications, self-signatures, etc. This is
intentional, since ssh attaches no inherent significance to these features.
openpgp2ssh will produce output for any requested RSA key. This means, among other things, that it will happily export revoked keys, unveri-
fiable keys, expired keys, etc. Make sure you do your own key validation before using this tool!
EXAMPLES
gpg --export-secret-key $KEYID | openpgp2ssh $KEYID | ssh-add -c /dev/stdin
This pushes the secret key into the active ssh-agent(1). Tools such as ssh(1) which know how to talk to the ssh-agent(1) can now rely on the
key.
AUTHOR
openpgp2ssh and this man page were written by Daniel Kahn Gillmor <dkg@fifthhorseman.net>.
BUGS
openpgp2ssh only works with RSA keys. DSA keys are the only other key type available in both OpenPGP and SSH, but they are currently unsup-
ported by this utility.
openpgp2ssh only accepts raw OpenPGP packets on standard input. It does not accept ASCII-armored input. openpgp2ssh Currently only exports
into formats used by the OpenSSH. It should support other key output formats, such as those used by lsh(1) and putty(1).
Secret key output is currently not passphrase-protected.
openpgp2ssh currently cannot handle passphrase-protected secret keys on input.
SEE ALSO
pem2openpgp(1), monkeysphere(1), monkeysphere(7), ssh(1), monkeysphere-authentication(8), monkeysphere-host(8)
BSD
March 1,, 2009 BSD