11-05-2008
the 9600 8n1 setting works fine for me with putty. have you downloaded the latest version of putty or redownloaded putty? maybe your putty has some problems...
10 More Discussions You Might Find Interesting
1. Linux
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
Discussion started by: jshoovie
2 Replies
2. UNIX for Dummies Questions & Answers
hi all,
i've got an old PC with unix (SCO System V/386 rel. 3.2) on it.
Pentium I; 128mb; ISA 2-port RS232 serial adapter card for an oki dot-matrix printer. (no usb, no CD)
i've been running an old cobol program to do some invoicing and print reports.
some time back i changed the... (0 Replies)
Discussion started by: frankpky
0 Replies
3. SCO
According to sco6 usb supplement, once you install it, you can install a bafo industries (BF-810) in the computer. I have done all that and followed the intructions completely and it shows up using usbprobe and l /dev/usb_ser*
Problem is that when I go to mkdev serial, it is not there.
Anyone... (1 Reply)
Discussion started by: jn5519
1 Replies
4. Solaris
Hi all,
I must connect my PC (Windows 2000) to Sun Enterprise 450 (4 X UltraSPARC-II 400Mhz) for Solaris 10 Installation. My PC doesn't have a serial port therefore I must use USB port.
How can I connect USB port of my PC to the serial port (DB 25) of Sun 450?
Will be there any problems with... (3 Replies)
Discussion started by: Sunb3
3 Replies
5. UNIX for Dummies Questions & Answers
Hi iam new bie to unix.
we are getting the sensor positional values on hyperterminal(UART).but
our task is to use this data for mouse movement.so wat we hav to do ??
is this required to change usb driver cud u send info regarding my query??
Thanks in advance :) :) :) (1 Reply)
Discussion started by: jayakar
1 Replies
6. IP Networking
i have wireless usb adapter rtl8187 from micromax company
my proplem is the signal is very weak and i cannot open website
can i increase the signal ?
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extensions.
wlan0... (5 Replies)
Discussion started by: rsd220
5 Replies
7. Solaris
Hi,
i try to plug in my USB wireless adapter to my sun solaris server. However, it cannot detect it. How do i set it so that it can detect it? (1 Reply)
Discussion started by: lkyow
1 Replies
8. Hardware
Hi Gurus of Unix
Recently I install a OpenSolaris in My HP 530
In this moment want to install a USB-A to Serial Cable. Any guru can send a Link where I can use how reference.
I want to configure a Router and my PC don't have any serial Port.
My LapTOP only has USB ports. In this case I buy a... (2 Replies)
Discussion started by: andresguillen
2 Replies
9. Solaris
In ubuntu etopic i create this udev rules for prolink 3g usb modem:
SUBSYSTEM=="block",
SUBSYSTEM=="scsi",
ATTRS{idVendor}=="1e0e",
ATTRS{idProduct}=="f000",
ACTION=="add",
RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000"
After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Discussion started by: shamsat
4 Replies
10. Linux
I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
Discussion started by: rbatte1
7 Replies
plink(1) PuTTY tool suite plink(1)
NAME
plink - PuTTY link, command line network connection tool
SYNOPSIS
plink [options] [user@]host [command]
DESCRIPTION
plink is a network connection tool supporting several protocols.
OPTIONS
The command-line options supported by plink are:
-V Show version information and exit.
-pgpfp Display the fingerprints of the PuTTY PGP Master Keys and exit, to aid in verifying new files released by the PuTTY team.
-v Show verbose messages.
-load session
Load settings from saved session.
-ssh Force use of SSH protocol (default).
-telnet
Force use of Telnet protocol.
-rlogin
Force use of rlogin protocol.
-raw Force raw mode.
-serial
Force serial mode.
-P port
Connect to port port.
-l user
Set remote username to user.
-m path
Read remote command(s) from local file path.
-batch Disable interactive prompts.
-pw password
Set remote password to password. CAUTION: this will likely make the password visible to other users of the local machine (via com-
mands such as `w').
-L [srcaddr:]srcport:desthost:destport
Set up a local port forwarding: listen on srcport (or srcaddr:srcport if specified), and forward any connections over the SSH con-
nection to the destination address desthost:destport. Only works in SSH.
-R [srcaddr:]srcport:desthost:destport
Set up a remote port forwarding: ask the SSH server to listen on srcport (or srcaddr:srcport if specified), and to forward any con-
nections back over the SSH connection where the client will pass them on to the destination address desthost:destport. Only works in
SSH.
-D [srcaddr:]srcport
Set up dynamic port forwarding. The client listens on srcport (or srcaddr:srcport if specified), and implements a SOCKS server. So
you can point SOCKS-aware applications at this port and they will automatically use the SSH connection to tunnel all their connec-
tions. Only works in SSH.
-X Enable X11 forwarding.
-x Disable X11 forwarding (default).
-A Enable agent forwarding.
-a Disable agent forwarding (default).
-t Enable pty allocation (default if a command is NOT specified).
-T Disable pty allocation (default if a command is specified).
-1 Force use of SSH protocol version 1.
-2 Force use of SSH protocol version 2.
-C Enable SSH compression.
-i path
Private key file for authentication.
-s Remote command is SSH subsystem (SSH-2 only).
-N Don't start a remote command or shell at all (SSH-2 only).
-sercfg configuration-string
Specify the configuration parameters for the serial port, in -serial mode. configuration-string should be a comma-separated list of
configuration parameters as follows:
o Any single digit from 5 to 9 sets the number of data bits.
o `1', `1.5' or `2' sets the number of stop bits.
o Any other numeric string is interpreted as a baud rate.
o A single lower-case letter specifies the parity: `n' for none, `o' for odd, `e' for even, `m' for mark and `s' for space.
o A single upper-case letter specifies the flow control: `N' for none, `X' for XON/XOFF, `R' for RTS/CTS and `D' for DSR/DTR.
MORE INFORMATION
For more information on plink, it's probably best to go and look at the manual on the PuTTY web page:
http://www.chiark.greenend.org.uk/~sgtatham/putty/
BUGS
This man page isn't terribly complete. See the above web link for better documentation.
PuTTY tool suite 2004-03-24 plink(1)