External NIC cards not pinging with each other in RHEL 5.1 Post: 302254786

10 More Discussions You Might Find Interesting

1. Solaris

NIC cards for sunblade 100

I need to add a PCI NIC to a sunblade 100 running solaris 8. Im new to this and was hoping someone could give me some card names and models which will work for this system and has a driver for this sparc system. thanks

2. IP Networking

Setup 2 NIC cards in one UNIX system

Hi; I have a UNIX box (SCO 5.0.2) with two (2) NIC cards. One card (NIC1) talks to a network 57.14.65.x/27. The other card NIC2) talks to users on 57.14.103.x and 57.14.105.x with subnet mask of 255.255.0.0. If I set NIC2 to this subnet mask (255.255.0.0) it seems like the NIC traffic is now...

3. High Performance Computing

veritas and nic cards

Hello I have 2 machines with 3 NIC cards. When I setup veritas, I receive this message: e1000g1 has an IP address configured on it. It could be a public NIC on ken. Are you sure you want to use e1000g1 for the first private heartbeat link? As if e1000g1 should not have an IP address....

4. HP-UX

routing issues with multiple NIC cards

I am running HP_UX 11.23 with 4 NIC cards (this is our TSM server) I have 4 subnets we are backing across. trying to keep traffic on their subnets. I only have one route statment should I add more. route add net 123.99.8.0 netmask 255.255.255.0 123.99.8.254 route add net 123.99.67.0 netmask...

5. HP-UX

HP UX 9000 NIC CARDS

Hello, I am trying to move an HP UX from one locaion to another. The new location don't have any Fiber switches. On the back of my server I see 2 RJ 45 for console management the other for networking , the server also has a fiber NIC card. When I disconnec the fiber and want to user regular...

6. IP Networking

Best reference for understanding low level info on nic cards drivers and functionality

Hi, What is the best reference that gives in detail on nic cards configuration , assigning multiple ip addresses to a single interface, netlink library etc and all basic stuff at this level..? Thanks

7. Red Hat

cannot ssh (use NFS) on RHEL box, but can mount external & ssh out of RHEL box

Ok, Im trying to get NFS working on my RHEL 5 box, apparently i can use the box as a client, but not as a server. If it helps i cant ssh into the box (server), but as a client ssh works fine. Ive configured server: /etc/hosts.allow: all : all all :all@all setup my /etc/exports file...

8. Ubuntu

Help asap squid with 2 nic cards setup

I found an old post that talks about 2 nice cards and it is driven by the IP address .... but I didn't understand it because the 2 people skipped information for me the newbie.. Can someone help me... I have the proxy server setup and I believe I have enabled the 2nd nic card, I just need one...

9. Ubuntu

How do you setup 2 nic cards for squid Ubuntu server?

I have a made my squid proxy, I now have add another nic card to an old CPU using Ubuntu server 12.04. I have seen another post similar however I am new and did not understand some of it. Something about redirecting IP address and IP table? I don't know how to do this.:confused:

10. Red Hat

RHEL 5.5 NIC Bonding

I am new to linux. I have a falconstor CDP installation which runs on RHEL 5.5 (Tikanga). There is a vendor option to bond nics in either 802.3ad or round robin, I choose 802.3ad. The server is connected to a Cisco 3750 switch. The problem is dropped packets and eth03 wont come up in the PO...

LEARN ABOUT CENTOS

aggregate-ios

AGGREGATE-IOS(1)					      General Commands Manual						  AGGREGATE-IOS(1)

NAME

       aggregate-ios - optimise a concatenated set of cisco/IOS prefix filters to help make them nice and short.

SYNOPSIS

       aggregate-ios <source_config >optimised_config

DESCRIPTION

       Takes  cisco IOS configuration on stdin, and optimises any prefix filters found using aggregate(1).  Optimised filters are produced on std-
       out.

OPTIONS

       None.

DIAGNOSTICS

       Any diagnostics produced by aggregate(1) are passed through on stderr.

EXAMPLES

       The following configuration fragment:

	 ip prefix-list AS65530 description Foo, Inc
	 ip prefix-list AS65530 permit 10.1.0.0/16
	 ip prefix-list AS65530 permit 10.2.0.0/16
	 ip prefix-list AS65530 permit 10.2.1.0/24
	 ip prefix-list AS65530 permit 10.3.0.0/16
	 ip prefix-list AS65531 description Bar.Com
	 ip prefix-list AS65531 seq 5 permit 192.168.1.0/24
	 ip prefix-list AS65531 seq 10 permit 192.168.2.0/24
	 ip prefix-list AS65531 seq 15 permit 192.168.0.0/19

       is optimised as follows:

	 ip prefix-list AS65530 permit 10.1.0.0/16 le 24
	 ip prefix-list AS65530 permit 10.2.0.0/15 le 24
	 ip prefix-list AS65531 permit 192.168.0.0/19 le 24

SEE ALSO

       aggregate(1)

HISTORY

       Aggregate-ios was written by Joe Abley <jabley@mfnx.net>.

BUGS

       All those in aggregate(1) and then some :)

Joe Abley							 2000 November 27						  AGGREGATE-IOS(1)