Problem with Etherchannel Post: 302253286

10 More Discussions You Might Find Interesting

1. AIX

EtherChannel network redundance problem

Problem description: On the condition of EtherChannel function of AIX, when the data exchange between the nodes on the network, there sometimes lost datat packets and cause the application failed. Once we deconfig EtherChannel and use the single adapter configuration, the application works...

2. AIX

AIX / Etherchannel / VLANs

I have 1 AIX server, 4 dual ported fiber attached ethernet cards and 4 VLANS coming in. Is it possible to present those 8 ports as 1 IP address using etherchannel? Thanks.

3. AIX

How to find the active network inteface on etherchannel

I have a server with multiple network interfaces. 2 of these interfaces, lets say en2 and en6 make up an etherchannel interface, which let's say en8. when I run the command lsattr -El ent8 I can see the designated primary and backup interfaces as ent6 and ent2, in the given order. But...

4. BSD

FreeBsd 8.0 : Just for Gurus! Trunk/Etherchannel mode

Hi Buddies! I need to do a new kind of setting in FreeBSD (i'm a newbie using this OS). Interface 1 y 2 in Trunk/Etherchannel mode IP-> xx.xx.xx.xx netmask-> 255.255.255.0 Anybody can help me with a step by step Guide?. THANKS A MILLION!!!

5. AIX

Pb Etherchannel/deconnexion port reseau

Hello, On a partition with AIX 5300-11-01-0944. 1 etherchannel ent9 with aggregation ent3/ent7. # lsdev |grep ent ... ent3 Available 07-01 4-Port 10/100/1000 Base-TX PCI-Express Adapter (14106803) ... ent7 Available 0A-01 4-Port 10/100/1000 Base-TX PCI-Express...

6. AIX

Can EtherChannel be a redundancy config?

I have one p5 server, no lpar, 2 physical network adapter, bundle as one EtherChannel. The two 2 physical network adapter connect to 2 network switches. How to make this as a redundancy config? Current is if one physical network adapter down, the seond one will go through the network. but if...

7. AIX

EtherChannel interface ping pelicularity

I have few AIX servers in my data center, which have their EtherChannel configured to have a fat pipe (active/active) and a nagios server to monitor the server uptimes. Nagios server pings every server in the data center and we have pretty much every known unix flavor in this data center. When...

8. AIX

Aggregated Etherchannel

Hi, I have a AIX5.3 P6-520 with 8x1Gb Ethernet ports with possible connections to 2 CISCO 2960 switches. I can create 8023ad Etherchannels which work correctly with the switches (I have set up for LACP passive and a valid channels) But can create 2x 8023ad 4Gb Etherchannels with no backups....

9. AIX

Etherchannel failover testing

Hi Guys, I am trying to test an etherchannel failover and switchback. I did failover from primary to backup adapter, but now I am not able to switch it back to primary. phcxxxxx:/ > entstat -d ent4 | grep Active Active channel: backup adapter ...

10. AIX

PowerVM SEA etherchannel performance ?

Hello, POWER7 machine. 4 x 1Gbit port ethernet adapter is dedicated to vios. 8023ad etherchannel is created using those 4 ports. Etherchannel adapter is shared to lpars using SEA. If I test network performance directly from vios partition (using iperf) I'm geting nice 4Gbit throughput. But if...

LEARN ABOUT REDHAT

bos_help

BOS_HELP(8)						       AFS Command Reference						       BOS_HELP(8)

NAME

       bos_help - Displays help for bos commands

SYNOPSIS

       bos help [-topic <help string>+] [-help]

       bos h [-t <help string>+] [-h]

DESCRIPTION

       The bos help command displays the complete online help entry (short description and syntax statement) for each command operation code
       specified by the -topic argument. If the -topic argument is omitted, the output includes the first line (name and short description) of the
       online help entry for every bos command.

       To list every bos command whose name or short description includes a specified keyword, use the bos apropos command.

OPTIONS

       -topic <help string>+
	   Indicates each command for which to display the complete online help entry. Omit the bos part of the command name, providing only the
	   operation code (for example, specify status, not bos status). If this argument is omitted, the output briefly describes every bos
	   command.

       -help
	   Prints the online help for this command. All other valid options are ignored.

OUTPUT

       The online help entry for each bos command consists of the following two or three lines:

       o   The first line names the command and briefly describes its function.

       o   The second line lists aliases for the command, if any.

       o   The final line, which begins with the string "Usage", lists the command's options in the prescribed order. Online help entries use the
	   same symbols (for example, brackets) as the reference pages in this document.

EXAMPLES

       The following command displays the online help entry for the bos status command:

	  % bos help status
	  bos status: show server instance status
	  Usage: bos status -server <machine name> [-instance <server
	  process name>+] [-long] [-cell <cell name>] [-noauth]
	  [-localauth] [-help]

PRIVILEGE REQUIRED

       None

SEE ALSO

       bos(8), bos_apropos(8)

COPYRIGHT

       IBM Corporation 2000. <http://www.ibm.com/> All Rights Reserved.

       This documentation is covered by the IBM Public License Version 1.0.  It was converted from HTML to POD by software written by Chas
       Williams and Russ Allbery, based on work by Alf Wachsmann and Elizabeth Cassell.

OpenAFS 							    2012-03-26							       BOS_HELP(8)