Login or Register to Ask a Question and Join Our Community

Sponsored Content
Full Discussion: Mirrored root and swap HP9000 machine
Operating Systems HP-UX Mirrored root and swap HP9000 machine Post 302252461 by vbe on Wednesday 29th of October 2008 01:38:20 PM
Old 10-29-2008
So vg01 has only one disk...
And 8 logical volumes...

But how is it connected?
Code:
raz:/home/vbe $ ioscan -funC ext_bus
Class     I  H/W Path  Driver S/W State   H/W Type     Description
=================================================================
ext_bus   0  0/0/1/0   c720 CLAIMED     INTERFACE    SCSI C896 Fast Wide Single-Ended
ext_bus   1  0/0/1/1   c720 CLAIMED     INTERFACE    SCSI C896 Ultra Wide Single-Ended
ext_bus   2  0/0/2/0   c720 CLAIMED     INTERFACE    SCSI C875 Ultra Wide Single-Ended
ext_bus   3  0/0/2/1   c720 CLAIMED     INTERFACE    SCSI C875 Ultra Wide Single-Ended
ext_bus   4  0/7/0/0   c720 CLAIMED     INTERFACE    SCSI C875 Fast Wide Differential
ext_bus   5  0/7/0/1   c720 CLAIMED     INTERFACE    SCSI C875 Fast Wide Differential

The idea is to know if you have external scsi subsystem or are you using a SAN
we are looking for what is 0/4/0 and 0/5/0...
Last edited by vbe; 10-29-2008 at 03:19 PM..
 

9 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Upgrade HP9000 HP-UX 10.20 to 11.00

To all expert members, i need your help. We have an existing HP9000 K-Class 32-bit with HP-UX 10.20 OS installed and we would like to upgrade it to HP-UX 11.00. I am not really confident in doing upgrades in our system because i don't have any experience or trainings on this. If somebody can... (3 Replies)
Discussion started by: Tris
3 Replies

2. Solaris

restore mirrored root

Hi, I have an ultra60 SUN Server with Solaris 10 4/04 S.O. installed on. I mirrored root disk and now I try to restore this. I simulate that I have lose the root FS, not for a hardware faillure but for a software problem and I can't use "meta"commands for using a good submirror. I must restore... (1 Reply)
Discussion started by: bonovox
1 Replies

3. Solaris

formula to get the swap space on a machine

Hello there are different opinions on how to get the swap space on Solaris. some say: swap -s and the space= used + available others say swap -l (donno how they get the swap size) other say 'top' command others say using format command (in print sub-command) Could you please advise on... (1 Reply)
Discussion started by: melanie_pfefer
1 Replies

4. Solaris

migrate zpool root mirrored to other server by network

I have two servers, the first server is a sun x4170 and i need transfer zpool root (with all system) that this moment is mirror to new server x4200 , i don't now how can i clone , copy o migrate rpool (root) in new server by network. The two servers are different sites. Do i need jumpstart or... (0 Replies)
Discussion started by: bombe
0 Replies

5. SCO

Reset root OR crack old sco 3.2 machine

I have an old compaq running sco 3.2. the old IT guy died and we need to reset the password OR crack into the machine. I have tried mscreen and at exploits but can't seem to get them to work. I have access with other user accounts. This is a machine we own. (4 Replies)
Discussion started by: herot
4 Replies

6. Shell Programming and Scripting

I have a requirement to check whose accounts are expired in Linux machine and send a mail to root

I have a requirement to check whose accounts are expired in Linux machine and send a mail to root user about the accounts. How can i achieve this in Linux? (1 Reply)
Discussion started by: mnmonu
1 Replies

7. HP-UX

HP9000 Container - NFS Issue

I am running HP9000 Containers version A.03.01. I have the container up and running. I now need to mount an exported file system from another HPUX server with both read and write permissions. I can get the mount okay but from the container I cannot read or write properly to the mounted file... (2 Replies)
Discussion started by: PaleRider
2 Replies

8. UNIX for Dummies Questions & Answers

SWAP command not working on Linux machine

Hi I am working on linux machine and swap command is not working Linux Machine On Solaris machine it is working fine: uname -a SunOS rgsm01 5.9 Generic_118558-03 sun4u sparc SUNW,Sun-Fire-V440 swap -s total: 6596320k bytes allocated + 1035968k reserved = 7632288k used, 38893408k available ... (5 Replies)
Discussion started by: Basant Mishra
5 Replies

9. Hardware

HP9000 Server - Stuck on RAID0

Hey all, I've got an old HP9000 L1000 server with HP-UX installed. The drives that the OS is running on are in RAID0. I am concerned for the reliability of the server. The four hard drives in the front of the server are LVD 18.2 drives. I know with RAID0, if one drive fails, they all fail. ... (2 Replies)
Discussion started by: mroselli
2 Replies

LEARN ABOUT DEBIAN

bt

BT(4)							   BSD Kernel Interfaces Manual 						     BT(4)

NAME

     bt -- Buslogic/Mylex MultiMaster SCSI host adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device isa
	   device scbus
	   device bt

	   In /boot/device.hints:
	   hint.bt.0.at="isa"
	   hint.bt.0.port="0x330"

DESCRIPTION

     This driver provides access to the SCSI bus connected to a Buslogic/Mylex MultiMaster or compatible controller:

	   MultiMaster "W" Series Host Adapters:

	   Adapter   Bus   Commands  Description
	   BT-948    PCI     192     Ultra SCSI-3
	   BT-958    PCI     192     Wide ULtra SCSI-3
	   BT-958D   PCI     192     Wide Differential Ultra SCSI-3

	   MultiMaster "C" Series Host Adapters:

	   Adapter   Bus   Commands  Description
	   BT-946C   PCI     100     Fast SCSI-2
	   BT-956C   PCI     100     Wide Fast SCSI-2
	   BT-956CD  PCI     100     Wide Differential Fast SCSI-2
	   BT-445C   VLB     100     Fast SCSI-2
	   BT-747C   EISA    100     Fast SCSI-2
	   BT-757C   EISA    100     Wide Fast SCSI-2
	   BT-757CD  EISA    100     Wide Differential Fast SCSI-2
	   BT-545C   ISA      50     Fast SCSI-2
	   BT-540CF  ISA      50     Fast SCSI-2

	   MultiMaster "S" Series Host Adapters:

	   Adapter   Bus   Commands  Description
	   BT-445S   VLB      30     Fast SCSI-2
	   BT-747S   EISA     30     Fast SCSI-2
	   BT-747D   EISA     30     Differential Fast SCSI-2
	   BT-757S   EISA     30     Wide Fast SCSI-2
	   BT-757D   EISA     30     Wide Differential Fast SCSI-2
	   BT-545S   ISA      30     Fast SCSI-2
	   BT-542D   ISA      30     Differential Fast SCSI-2
	   BT-742A   EISA     30     SCSI-2 (742A revision H)
	   BT-542B   ISA      30     SCSI-2 (542B revision H)

	   MultiMaster "A" Series Host Adapters:

	   Adapter   Bus   Commands  Description
	   BT-742A   EISA     30     SCSI-2 (742A revisions A - G)
	   BT-542B   ISA      30     SCSI-2 (542B revisions A - G)

     Tagged queueing is supported on 'W' series adapters, 'C' series adapters with firmware of rev 4.42 and higher, and 'S' series adapters with
     firmware of rev 3.35 and higher.

     Boards with certain firmware revisions may lock up under heavy load to certain devices, especially if tagged queueing is used.  Should you
     encounter a problem with your adapter, contact Mylex technical support and ensure you have the latest firmware for your controller.

HARDWARE

     The bt driver supports the following BusLogic MultiMaster ``W'', ``C'', ``S'', and ``A'' series and compatible SCSI host adapters:

     o	 BusLogic BT-445C
     o	 BusLogic BT-445S
     o	 BusLogic BT-540CF
     o	 BusLogic BT-542B
     o	 BusLogic BT-542B
     o	 BusLogic BT-542D
     o	 BusLogic BT-545C
     o	 BusLogic BT-545S
     o	 BusLogic/BusTek BT-640
     o	 BusLogic BT-742A
     o	 BusLogic BT-742A
     o	 BusLogic BT-747C
     o	 BusLogic BT-747D
     o	 BusLogic BT-747S
     o	 BusLogic BT-757C
     o	 BusLogic BT-757CD
     o	 BusLogic BT-757D
     o	 BusLogic BT-757S
     o	 BusLogic BT-946C
     o	 BusLogic BT-948
     o	 BusLogic BT-956C
     o	 BusLogic BT-956CD
     o	 BusLogic BT-958
     o	 BusLogic BT-958D
     o	 Storage Dimensions SDC3211B / SDC3211F

     AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also supported by the bt driver.

SEE ALSO

     cd(4), da(4), sa(4), scsi(4)

HISTORY

     The bt driver first appeared in the 386BSD patch kit.

AUTHORS

     Julian Elischer wrote a driver for the Multimaster cards that appeared in the 386BSD patch kit.  The driver was rewritten by Justin T. Gibbs
     to take advantage of new board features and work with the CAM SCSI framework in FreeBSD 3.0.

     Special thanks to Leonard N. Zubkoff for writing such a complete and well documented Mylex/BusLogic MultiMaster driver for Linux.	Support in
     this driver for the wide range of MultiMaster controllers and firmware revisions, with their otherwise undocumented quirks, would not have
     been possible without his efforts.

BSD
								   June 18, 2006							       BSD
All times are GMT -4. The time now is 01:56 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy