ant:/home/vbe $ /usr/sbin/vgdisplay -v vg00
--- Volume groups ---
VG Name /dev/vg00
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 14
Open LV 14
Max PV 16
Cur PV 2
Act PV 2
Max PE per PV 4350
VGDA 4
PE Size (Mbytes) 8
Total PE 8680
Alloc PE 7840
Free PE 840
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
--- Logical volumes ---
LV Name /dev/vg00/lvol1
LV Status available/syncd
LV Size (Mbytes) 304
Current LE 38
Allocated PE 76
Used PV 2
LV Name /dev/vg00/lvol2
LV Status available/syncd
LV Size (Mbytes) 4000
Current LE 500
Allocated PE 1000
Used PV 2
LV Name /dev/vg00/lvol3
LV Status available/syncd
LV Size (Mbytes) 352
Current LE 44
Allocated PE 88
Used PV 2
LV Name /dev/vg00/lvol4
LV Status available/syncd
LV Size (Mbytes) 1000
Current LE 125
Allocated PE 250
Used PV 2
LV Name /dev/vg00/lvol5
LV Status available/syncd
LV Size (Mbytes) 504
Current LE 63
Allocated PE 126
Used PV 2
LV Name /dev/vg00/lvol6
LV Status available/syncd
LV Size (Mbytes) 3400
Current LE 425
Allocated PE 850
Used PV 2
LV Name /dev/vg00/lvol7
LV Status available/syncd
LV Size (Mbytes) 1800
Current LE 225
Allocated PE 450
Used PV 2
LV Name /dev/vg00/lvol8
LV Status available/syncd
LV Size (Mbytes) 3000
Current LE 375
Allocated PE 750
Used PV 2
LV Name /dev/vg00/lvol9
LV Status available/syncd
LV Size (Mbytes) 4096
Current LE 512
Allocated PE 1024
Used PV 2
LV Name /dev/vg00/lvol10
LV Status available/syncd
LV Size (Mbytes) 904
Current LE 113
Allocated PE 226
Used PV 2
LV Name /dev/vg00/lvol11
LV Status available/syncd
LV Size (Mbytes) 2000
Current LE 250
Allocated PE 500
Used PV 2
LV Name /dev/vg00/lvol12
LV Status available/syncd
LV Size (Mbytes) 904
Current LE 113
Allocated PE 226
Used PV 2
LV Name /dev/vg00/lvol13
LV Status available/syncd
LV Size (Mbytes) 5000
Current LE 625
Allocated PE 1250
Used PV 2
LV Name /dev/vg00/swap3
LV Status available/syncd
LV Size (Mbytes) 4096
Current LE 512
Allocated PE 1024
Used PV 2
--- Physical volumes ---
PV Name /dev/dsk/c2t2d0
PV Status available
Total PE 4340
Free PE 420
Autoswitch On
Proactive Polling On
PV Name /dev/dsk/c1t2d0
PV Status available
Total PE 4340
Free PE 420
Autoswitch On
Proactive Polling On
One vg , 2 pv , all lvol use 2 pv
Code:
ant:/home/vbe $ /usr/sbin/swapinfo
Kb Kb Kb PCT START/ Kb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 4096000 0 4096000 0% 0 - 1 /dev/vg00/lvol2
dev 4194304 0 4194304 0% 0 - 1 /dev/vg00/swap3
dev 4194304 0 4194304 0% 0 - 0 /dev/esvg01/lvol2
reserve - 1395040 -1395040
memory 6477440 1540528 4936912 24%
ant:/home/vbe $ /usr/sbin/lvdisplay /dev/vg00/lvol2
--- Logical volumes ---
LV Name /dev/vg00/lvol2
VG Name /dev/vg00
LV Permission read/write
LV Status available/syncd
Mirror copies 1
Consistency Recovery MWC
Schedule parallel
LV Size (Mbytes) 4000
Current LE 500
Allocated PE 1000
Stripes 0
Stripe Size (Kbytes) 0
Bad block off
Allocation strict/contiguous
IO Timeout (Seconds) default
Looking at swapinfo choose lvol2...
lvdisplay confirms...
To all expert members, i need your help.
We have an existing HP9000 K-Class 32-bit with HP-UX 10.20 OS installed and we would like to upgrade it to HP-UX 11.00. I am not really confident in doing upgrades in our system because i don't have any experience or trainings on this. If somebody can... (3 Replies)
Hi,
I have an ultra60 SUN Server with Solaris 10 4/04 S.O. installed on.
I mirrored root disk and now I try to restore this.
I simulate that I have lose the root FS, not for a hardware faillure but for a software problem and I can't use "meta"commands for using a good submirror.
I must restore... (1 Reply)
Hello
there are different opinions on how to get the swap space on Solaris.
some say: swap -s and the space= used + available
others say swap -l (donno how they get the swap size)
other say 'top' command
others say using format command (in print sub-command)
Could you please advise on... (1 Reply)
I have two servers, the first server is a sun x4170 and i need transfer zpool root (with all system) that this moment is mirror to new server x4200 , i don't now how can i clone , copy o migrate rpool (root) in new server by network. The two servers are different sites.
Do i need jumpstart or... (0 Replies)
I have an old compaq running sco 3.2. the old IT guy died and we need to reset the password OR crack into the machine. I have tried mscreen and at exploits but can't seem to get them to work. I have access with other user accounts. This is a machine we own. (4 Replies)
I have a requirement to check whose accounts are expired in Linux machine and send a mail to root user about the accounts. How can i achieve this in Linux? (1 Reply)
I am running HP9000 Containers version A.03.01. I have the container up and running. I now need to mount an exported file system from another HPUX server with both read and write permissions. I can get the mount okay but from the container I cannot read or write properly to the mounted file... (2 Replies)
Hi
I am working on linux machine and swap command is not working Linux Machine
On Solaris machine it is working fine:
uname -a
SunOS rgsm01 5.9 Generic_118558-03 sun4u sparc SUNW,Sun-Fire-V440
swap -s
total: 6596320k bytes allocated + 1035968k reserved = 7632288k used, 38893408k available
... (5 Replies)
Hey all,
I've got an old HP9000 L1000 server with HP-UX installed. The drives that the OS is running on are in RAID0. I am concerned for the reliability of the server. The four hard drives in the front of the server are LVD 18.2 drives. I know with RAID0, if one drive fails, they all fail. ... (2 Replies)