I have a Allied Telesyn AT-GS950 16 port switch.
All hosts&router have rtl8139 NICs.
OS : Slackware linux 12.1.
I use a switch with vlan technique to separate my network to some segment.
here my plan:
router eth0 ---> switch port 1
switch port 5 <--- eth0 host A
switch port 6 <--- eth0 host B
Please help, there's maybe I have wrong concept about vlan configuration?
Thank you very much.
Regards,
Denny
All config seems to be ok. Check ping from host to router (in same network, 172.16.5.2 -> 172.16.5.1 etc). Check running router process on router. And check trunk mode on AT switch - it must be 802.1q (dot1q).
Additionaly try to disable firewall on router, if you use that
hi,
i tried to configure an VLAN interface on my SF280 based on the documentation on docs.sun.com
# ifconfig eri1000 plumb up
Oct 21 13:41:26 cmsmaster ip: ip_rput_dlpi(eri1000): DL_ERROR_ACK for DL_ATTACH_REQ(11), errno 8, unix 0
ifconfig: SIOCSLIFNAME for ip: eri1000: no such interface... (2 Replies)
I do have 2 different segment network which different platform on each segment. E.g. 20 segment, Windows OS can talk to Unix OS and 21 segment practice same rule. Further more, Windows OS from 20 segment can talk to 21 segment other OS but only the UNIX OS in 20 segment fail to talk to 21 segment.... (3 Replies)
Hi all,
so server: FreeBSD 7.0 release,
interfaces on it DLINK DGE-528T with support of vlans :))
so first interface looks to LAN second to ISP.
I created vlan1 with id 1 and gave to it ip address and plug it in
tagged port of swith for vlan 1. so client from vlan1 reaches the server.
it... (2 Replies)
Hi,
Whether the following piece of code is placed in the read-only memory of code (text) segment or data segment?
char *a = "Hello";
I am getting two different answers while searching in google :( that's why the confusion is (7 Replies)
Hello. I want to Communicate 2 VLAN with router like this solution:
http://8pic.ir/images/83m0ouih8mmm9s1sfl56.jpg
For this purpose I'm configuring 2 Linux system as a switch and connect 4 host to them. Then a router is added to scenario.
The configuration of the switches is:
On DUT1(Linux):... (1 Reply)
Hi,
Is it possible to VLAN tag with a ce interface on Solaris 9? Link speed is gb.
ce:0:ce0:link_speed 1000
I have a ce0 interface I would need to have access to another VLAN as well as the one it's currently on.
What commands would I need to run?
Thanks.;) (2 Replies)
We have two hosts in same vlan with same route rules.
One of them is not able to connect to an outside IP while in another I get "failed: Connection timed out" while testing the connectivity through netcat.
I have tried mtr /traceroute and it gives me the same results.
Is there a netcat... (1 Reply)
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Hi Folks,
I am currently moving systems to a new environment, with some changes to the network requirements on the systems.
One of these changes is moving from just standard IPMP to using IPMP on top of a VLAN, I have used VLAN tagging befor without issue - however not with IPMP.
What I... (2 Replies)
Discussion started by: gull04
2 Replies
LEARN ABOUT DEBIAN
iblinkinfo
IBLINKINFO(8) OpenIB Diagnostics IBLINKINFO(8)NAME
iblinkinfo.pl - report link info for all links in the fabric
SYNOPSIS
iblinkinfo.pl
[-Rhcdl -C <ca_name> -P <ca_port> -v <lt,hoq,vlstall> -S <guid> -D <direct_route>]
DESCRIPTION
iblinkinfo.pl reports the link info for each port of each switch active in the IB fabric.
OPTIONS -R Recalculate the ibnetdiscover information, ie do not use the cached information. This option is slower but should be used if the
diag tools have not been used for some time or if there are other reasons to believe the fabric has changed.
-S <guid>
Output only the switch specified by <guid> (hex format)
-D <direct_route>
Output only the switch specified by the direct route path.
-l Print all information for each link on one line. Default is to print a header with the switch information and then a list for each
port (useful for grep'ing output).
-d Print only switches which have a port in the "Down" state.
-v <lt,hoq,vlstall>
Verify additional switch settings (<LifeTime>,<HoqLife>,<VLStallCount>)
-c Print port capabilities (enabled and supported values)
-C <ca_name> use the specified ca_name for the search.
-P <ca_port> use the specified ca_port for the search.
AUTHOR
Ira Weiny
<weiny2@llnl.gov>
OpenIB Jan 24, 2008 IBLINKINFO(8)