Serial port problem Post: 302251258

10 More Discussions You Might Find Interesting

1. Programming

socket on serial port

Does anyone know if it's possible to send socket by a serial port ? If yes, how can I find on Irix the value of my serial ports to use with this function : serverSockAddr.sin_port = ? Thanks for all responses ! Kintoo

2. Programming

Problem regarding serial port and multithreading

hello, I am creating a application in which I first open the serial port and then create the thread..for reading the data comming through that serial port. from that same thread I create another thread that is write thread means for writing on the serial port... I am continously polling again...

3. Programming

problem while having a communication with serial port?????

hello, I am gettin problem while sending and recieving data through seial port... when I am sending Data then the reciever end is not able to recieve that data ..... Reciever end is running in infinite loop just polling after some time to check that there is data on the port and then again...

4. UNIX for Dummies Questions & Answers

problem with serial port BSD

Hello all , i have change my system debian linux to freebsd( pcBSD) all working as well , but the serial does not work correctly. Under linux the problem does not appears. my problem is than my serial port does work . the first step than i have make is look with dmesg if my serial are...

5. Programming

problem in coding for GSM interfacing using serial port

i am having some coding problem in c for interfacing the GSM module through serial port. i want to send/receive sms. i have done all the setting for the port and know the AT command to use in this but i am actually having problem in reading and writing from serial port how to handle the signal when...

6. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and...

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

8. SCO

Problem finding what is using a serial port

How can I determine what process is currently using a serial port? A good bit of google searching hasn't turned up anything useful, but it seems like there has to be a way to do this without too much difficulty. When I first started looking into this problem, I assumed that when a port was in...

9. Programming

Read from serial port

Hi I try to communicate with a GSM modem, from C, for sending SMS. I use standart AT-commands. Working well with terminal. There is no problem writing ti the port. But when I try to read I only get a echo, I write "ATI" and get "ATI" back, I should get somthing like "SIEMENS 35...

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT REDHAT

serial_cs

SERIAL_CS(4)						     Kernel Interfaces Manual						      SERIAL_CS(4)

NAME

       serial_cs - PCMCIA serial port driver

SYNOPSIS

       insmod serial_cs.o [pc_debug=n] [irq_list=i,j,...]  [do_sound=n]

DESCRIPTION

       Serial_cs  is  the Card Services driver for all PCMCIA serial devices, including modem cards.  When serial_cs is bound to a serial or modem
       card, it will generally attempt to allocate the first unused serial device for use by the card.	The device chosen will be recorded in  the
       kernel log file, and will also be reported to cardmgr(8).  The major and minor numbers and device name reported by serial_cs will match the
       corresponding "dialout" device (/dev/cua#).  The new device can be accessed using this device file or the corresponding /dev/ttyS#  device.
       The default serial card setup script will link the dialout device to /dev/modem.

PARAMETERS

       pc_debug=n
	      Selects  the PCMCIA debugging level.  This parameter is only available if the module is compiled with debugging enabled.	A non-zero
	      value enables debugging.

       irq_list=i,j,...
	      Specifies the set of interrupts that may be allocated by this driver.

       do_sound=n
	      A flag specifying if speaker output should be enabled.  The default is 1 (true).	Set to 0 to disable speaker output.

AUTHOR

       David Hinds - dahinds@users.sourceforge.net

SEE ALSO

       cardmgr(8), pcmcia(5).

pcmcia-cs							2000/06/12 21:24:48						      SERIAL_CS(4)