Qlogic HBA card in E450 with errors Post: 302251151

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to...

2. UNIX for Advanced & Expert Users

Sun internal disks and HBA card

I have a V490 that has couple internal disks attached to the same dual-port HBA card that I'm planning attach to the SAN for additional storage. Would I sacrifice performance if I use the same HBA? Is it better to throw in a new HBA instead?

3. AIX

Need HBA card driver

Hi All, SUN emulex HBA card has been installed on P520 box. When i run the cfgmgr i am getting the following message. lpar2#cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed....

4. Solaris

Qlogic HBA's - lputil / lpfc.conf

Hi all Hope your all well and happy in solaris land :-) Recently purchased some Qlogic HBA's for a few solaris servers. Was told that you cant have mixed chipsets and as this client is all qlogic, have to have hba's using qlogic. 1) Is that correct ? Cant mix different chipsets of...

5. Solaris

Qlogic HBA + Veritas - Part 2

Hi all, New to the world of SAN, so forgive me for any ambigious terminology. I have a sun 6800 chassis with two domains, both domains connected to a San ancor sanbox ( 2 x Storeedge T3 / Mcdata switch ). Current Qlogic HBA's are 1Gb glc adaptors, version of qlc drivers...

6. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Hi All, I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices.. bash-2.05# luxadm -e port Found path to 0 HBA ports bash-2.05# luxadm probe No Network Array enclosures found in /dev/es...

7. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

8. Solaris

Which FC HBA card support Solaris9

I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage. in OK prompt, PROBE-SCSI-ALL showing A5000 fc hdds details in ok prompt..... but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000...

9. Red Hat

lun masking at qlogic HBA level

need to do LUN masking at qlogic HBA level..at RHEL 5.x I am using qla* module at part of the Unix kernel, it is not OEM drivers that come with the HBA card, so I can't use Sansurfer to do this.. Is there a way to do this at all ?? :wall:

10. Red Hat

HBA card faulty

Hi, How to determine if HBA card in getting faulty from linux host ? any pointers.

LEARN ABOUT SUSE

suninstall

suninstall(1M)						  System Administration Commands					    suninstall(1M)

NAME

       suninstall - install the Solaris operating system

SYNOPSIS

       suninstall

DESCRIPTION

       install-solaris(1M) is now the preferred command for starting and restarting the Solaris Installation program. It should be used instead of
       suninstall. suninstall is symbolically linked to install-solaris.

       suninstall is a forms-based and graphical subsystem for installing the operating system.

       suninstall exists only on the Solaris installation media (CD or DVD) and should only be invoked from there. Refer to the Solaris 10 Instal-
       lation Guide: Basic Installations for more details.

       suninstall allows installation of the operating system onto any standalone system. suninstall loads the software available on the installa-
       tion media. Refer to the Solaris 10 Installation Guide: Basic Installations for disk space requirements.

USAGE

       Refer to the Solaris 10 Installation Guide: Basic Installations for more information on the various menus and selections.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom (Solaris  instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+

SEE ALSO

       pkginfo(1), install(1M), install-solaris(1M), pkgadd(1M), attributes(5)

       Solaris 10 Installation Guide: Basic Installations

NOTES

       It is advisable to exit suninstall by means of the exit options in the suninstall menus.

SunOS 5.10							    9 Sep 2004							    suninstall(1M)