10-22-2008
Thanks All,
A laptop will not help here because our servers are at a remote location. DukeNuke2, correct me if i am wrong. So you are saying the I can connect my from Serial Mgt Port on V245 to Serial Port A on V120 with a RJ45 cable, then use command "tip" on V245 to get a terminal session to V120.
Thanks again
9 More Discussions You Might Find Interesting
1. Solaris
Hi friends,
Please tell me how to break the LOMlite password on SUN Netra X1 system.
Thanks
venkat (2 Replies)
Discussion started by: rvrao77
2 Replies
2. UNIX for Dummies Questions & Answers
Hello all,
I'm lost and can't figure this problem out.
I have a Sun fire 280R running Solaris 8. Everything was working great. I have one drive in bay 1(not 0). But when I reboot the system it trys to open files in /dev/rdsk/c1t1d0s0. Should it have been opeing /dev/rdsk/c1t0d0s0, the... (4 Replies)
Discussion started by: larryase
4 Replies
3. Solaris
All,
After a power loss I went to power on our sun fire v120 that is running solaris 10 and now it will not boot. I tried power cycling it from the lom and pulling the cord but nothing works. All it does is after a power cycle it will start to boot and then start to spit out a bunch of hex... (2 Replies)
Discussion started by: jsandova
2 Replies
4. Solaris
Hi experts
is it possible to install lom on sun ultra 10 box?
can you guys help me in undertanding lom as i tried goggling , couldn't get good stuff.
Please :) (6 Replies)
Discussion started by: kumarmani
6 Replies
5. Solaris
I have come into my possesion a v120 server at work that was decommisioned from another project. I don't have the Solaris Installation CD nor do I have root or any user credentials on this server. My goal was to install OpenSolaris on this server and use it as a playground for learning UNIX... (6 Replies)
Discussion started by: stringzz
6 Replies
6. Solaris
I am new to Sun.
I brought Sun Fire 280R to practice UNIX. What are the requirements for the monitor/CRT? Will it burn out old non-Sun CRTs? Does it need LCD monitor?
Thanks. (3 Replies)
Discussion started by: bramptonmt
3 Replies
7. Solaris
Hi,
I recently acquired an old Sun Fire v120 from work. I plan to play around with this at home whilst I'm studying for my SCSA exams. Only problem is it currently has no memory installed. I believe the memory modules required are 168 pin PC133 DIMMs. Unfortunately, the original Sun modules are... (3 Replies)
Discussion started by: skinyana
3 Replies
8. Solaris
It's a DHCP server. We want to make a clone for fail over purpose since there are some identical systems available here. We do have a secondary DHCP server.
Hardware: Sun v120. OS: Solaris 9. Two disks without array, /var and /opt on the secondary disk.
How can I clone the system via network... (1 Reply)
Discussion started by: aixlover
1 Replies
9. Solaris
Hello,
I have purchaced an old SUn fire x2270 server .
I wanted to make ILOM upgrade to the latest version of software :
ILOM 3.0.9.18.a r126592
BIOS vers. 2.09
Server 2.2.3
(10-Aug-2018)
Because my version is very outdated.
But i can't download the updatebecause it's require... (4 Replies)
Discussion started by: LouisLakoute
4 Replies
LEARN ABOUT LINUX
nrports
NRPORTS(5) Linux Programmer's Manual NRPORTS(5)
NAME
nrports - NET/ROM port configuration file.
DESCRIPTION
Nrports is an ASCII file that contains information about each of the NET/ROM ports that are to be used. When dealing with an NET/ROM util-
ity such as call, it takes an optional argument that is the port name. This port name is a reference to the line within nrports, which has
the same name. The information on each line contains enough information to bind the command to a particular NET/ROM interface, this binding
is done by matching the callsign on the line in nrports with the callsign of the port set by ifconfig.
The nrports file may contain comments that begin with a # in the first column, or a port description in the following format, each field
being delimited by white space:
name callsign alias paclen description
The field descriptions are:
name this is the unique NET/ROM port identifier.
callsign the callsign of the NET/ROM interface to bind to.
alias this is the alias of the NET/ROM port.
paclen is the default packet size for this interface.
description a free format description of this interface, this field extends to the end of the line. It may contain spaces.
FILES
/etc/ax25/nrports
SEE ALSO
call(1), netrom(4), ifconfig(8), nrparms(8).
Linux 2 August 1996 NRPORTS(5)