svgalib.faq(7)							Svgalib User Manual						    svgalib.faq(7)

NAME

       svgalib.faq - frequently asked questions about svgalib

INTRODUCTION

       I (Matan Ziv-Av), added/changed some of the answers in this file, so some answers are mine, and some are Michael's.

       List  of (recently) frequently asked questions about svgalib. Esp. about it's status and future. Please note that as of now all answers are
       just written by me, Michael Weller <eowmob@exp-math.uni-essen.de>. I'd like this to change. So email your suggestion (best of all: question
       and the answer).

       Also,  most questions deal with the status and future and my ideas about it. Necessarily they contain my own private opinions on this. Peo-
       ple may disagree and I'm sure I don't have the best ideas about it or may even be completely wrong. I don't want to force anyone  to  agree
       with me.

       Also, I was asked about MY opinions, so I'm just presenting them here.

CONTENTS

       Q 1)   I want to write some svgalib application. Where is the documentation?

       Q 2)   My board is not supported. What now?

       Q 3)   I get:

	      You must be the owner of the current console to use svgalib.
	      Not running in a graphics capable console, and unable to find one.

	      However, though logged in not directly from the linux console, I am the owner of the console.

       Q 4)   Is svgalib dead?

       Q 5)   There are so many Xfree drivers, why not just use them.

       Q 6)   Why not just use the VGA BIOS?.

       Q 7)   What about GGI?

       Q 8)   Why not just use X11?

       Q 9)   Now, again, what about the future of svgalib?

       Q 10)  Ok, just for completeness, what are your plans about svgalib anyway?

       Q 11)  Nice plan. But will it become true?

THE QUESTIONS

   Q 1)
       I want to write some svgalib application. Where is the documentation?

   A a)
       Well,  did you really look at everything? The 0-README file in the top level directory contains all function prototypes and explanations on
       how to call them.

       Yes, the documentation is short and/or confusing. Sorry, English is not my native tongue. Many people complain and want to write some  bet-
       ter  documentation.  You are welcome to do so! However, up to now, either people found the documentation sufficient once they looked at the
       correct files or they just gave up. At least, I never heard from these people again.

       Also, svgalib comes with source. If in doubt: read it.

       Finally: Linux distributions include svgalib, but not the source and README's (or hide them so good noone finds them).  Well,  no  problem,
       get  full svgalib source, demos, readme's from svgalib-*.tar.gz on any Linux FTP server in your vicinity. Even if you don't dare to install
       or compile it, it contains the readme's.

       Oh yes, there are some simple demos in the demos/ subdir. They should get you started.

       When someone writes man(1) manual pages, a distribution might just install them. Please do not complain, write them, mail them to me.

   A b)
       Finally, I, Michael Weller wrote the manpages. Looking at svgalib(7) should get you started. Additions and corrections are  still  welcome,
       of course.

   Q 2)
       My board is not supported. What now?

   A)
       Simple:

       a)     Contact the maintainers (see other README's) and check out if someone is working on a driver.

       b)     If so, contact them if you like and announce you'd be willing to test things or even help coding.

       c)     If  not, write a driver. Get as many docs on your card as you can, then read and understand the internals of svgalib (again read the
	      README's carefully!).

       Please understand that this is a free project. I will not go and buy a similar card and write a driver for you. I already wrote support for
       the  hardware  I have! I just do this as a hobby. Because I don't get paid for this I can not just buy card & docu and spend much much time
       supporting whatever graphics card on earth exists.

       Also read below on the future of svgalib.

       If you don't feel able to write a driver for whatever reason, please do not complain if other people don't do it for you (because  you  are
       not better than they are).

   Q 3)
       I get:

       You must be the owner of the current console to use svgalib.
       Not running in a graphics capable console, and unable to find one.

       However, though logged in not directly from the linux console, I am the owner of the console.

   A)
       Alas,  some programs use their suid root privilege and become a full root owned process. svgalib thinks they are run by root which does not
       own the current console.  Defining ROOT_VC_SHORTCUT in Makefile.cfg and recompiling will allow svgalib to allocate a new  VC.  However,	it
       will allow any person which is able to exec that program to start in on a new console. Even if not logged in from the console at all. Thus,
       for security, you need to explicitly enable that root feature.

   Q 4)
       Is svgalib dead?

   A)
       This question comes up frequently esp. in recent times.

       The answer is, of course, no.

   Q 5)
       There are so many Xfree drivers, why not just use them.

   A)
       Well, actually much of the code in there is actually already used by svgalib. Xfree coders worked on svgalib and vice versa. But  honestly,
       do  not	expect	that a driver from Xfree can just be used for svgalib. The internal structures of Xfree and svgalib (and GGI) are just too
       different. As a source of knowledge and for one or the other subroutine, the Xfree sources are invaluable however.

   Q 6)
       Why not just use the VGA BIOS?.

   A)
       Actually, we do. There is now, thanks to Josh Vanderhoof, a VESA driver.  The VESA driver does not  work  on  all  cards,  even	though	it
       should.	It does not even work on all cards where vbetest works. If vbetest does not work it means the bios writers assumed it would always
       run in DOS, and used tricks (for delay, etc.) that can't work under Linux. If vbetest works, but the VESA driver does not, I (Matan Ziv-Av)
       believe it is due to the following reason: The driver use VESA function 4 (save/restore video state). This function can't be used in a sin-
       gletasking environment (DOS) and as such, some bios writers failed to implement it properly, and all the tests (which are  run  under  DOS)
       failed to discover this.

       The VESA driver does work with many cards though.

   Q 7)
       What about GGI?

   A)
       Yes,  GGI. Another long story. At first: Yes, I like the idea of an in kernel graphics driver. I like it very much. And, yes, this is a bit
       weird because I am the svgalib maintainer and a working GGI will make svgalib obsolete. Again, I already  said  above:  I  did  not  invent
       svgalib nor do I promote it as the solution (now compare this to GGI). It just does what it does and works for me and some other people.

       I  liked  this idea so much, I even started coding a frame buffer device once. After a short time, other people came out with the GGI idea.
       Right from their beginning they claimed to be the only source of wisdom. I tried to join our efforts, but failed. In general  we  have  the
       same goals (read the GGI project pages for that).

       Anyhow,	at  that  time	a  flame war started. I don't really know why. I don't see I did anything else than offering my opinions, work and
       experience. But that should be judged by others.

       Well, after some time I stopped bothering them. I was satisfied to learn later though that they actually came up with  some  conclusions  I
       proposed first but weeks or months later. But let us leave the past alone.

       When  intending to contribute to svgalib, you should think about what you really want. I don't see that GGI is becoming available soon. GGI
       people told me the opposite again and again, ok, I still don't see it. Still out of a sudden, everything might  be  GGI	infested,  so  you
       might consider contributing to GGI instead.

       With  svgalib  you  might be able to use your fruits earlier. And anyone (with supported hardware) can just use it right away without rein-
       stalling kernel/X11 what else (maybe being unable to use something he did before).

   Q 8)
       Why not just use X11?

       Yes, this is what many people say. This is the common Unix way to do it.  X does it.

       But X has some drawbacks:

       i)     It uses many resources. Admittedly this is becoming of lesser importance now, where you can run a sensible X11 Linux system  on  8MB
	      (16 MB for heaven like performance) which is the absolute minimum to get a simple text editor running under M$ windows.

	      Still,   an   advantage  of  Linux  is  the  ability  to	use  old  hardware  for  mission  critical  background	jobs  on  the  net
	      (servers/routers/firewalls) on low price or otherwise even unusable hardware.

       ii)    X has a nice API with draw commands for any kind of 'command oriented' screen output. I mean with that: Select a color, draw a line,
	      polygon, etc.

	      This  imposes  a	bunch of overhead. If you just want access to the screen memory, it slows things down as hell. If you want just to
	      use above's draw commands, it is ok!

       iii)   One can now circumvent the API restrictions by getting direct screen access using a special Xfree extension.  Basically  Xfree  just
	      setups  the  screen and gives you shared memory access to the screen memory. IMHO, this is not much different from the shared memory
	      X11 extension by MIT (which is probably why it was added so easily).  Still it needs quite some overhead, at  least  when  the  card
	      does not allow for a linear frame buffer.

	      However,	you cannot change screen modes and rez as easily. This is IMHO THE drawback of X. For a picture viewer, you want 256 color
	      high/true color modes on a per picture basis (also, insert any other application you like: movie viewers, a special game, a  drawing
	      program).  Also, you want a small picture use a low rez s.t. it does not appear as a thumbnail, maybe use a high rez mode for a huge
	      picture which you don't want to use on a permanent basis because it flickers like hell (and you don't want to use a panning  virtual
	      desktop too, I hated them at best).

	      This  latter  restriction  can of course be circumvented by enlarging the picture. But this will need much time for a picture viewer
	      already and certainly too much for smooth video or game animations.

       iv)    Finally, the problem how X11 itself accesses the screen is not solved.  Security is usually no concern because X11  does	it,  is  a
	      trusted executable and a firewall between applications and the hardware.

	      Alas,  there  might  be security holes, also the stability and performance issues (IRQ driven accelerator queue, CPU support for VGA
	      memory paging) still exist, though one can expect an Xserver to be a generally well coded application.

   Q 9)
       Now, again, what about the future of svgalib?

       For console graphics, svgalib is still the only solution for most people, and as such it should go on for a while.  Compared  to  the  othe
       console	graphics  options  (kgi and kernel fb device), writing svgalib driver is the simplest (at least, this is my experience), and so it
       makes sense to believe that svgalib will work on all cards where there is someone interested enough in that support.

   Q 10)
       Ok, just for completeness, what are your plans about svgalib anyway?

       First, make svgalib cooperate nicely with kernel fb device. Then (and it should be very similar) make svgalib work on a secondary vga card.

       A rewrite of the code for memory handling and virtual console handling is necessary for the  previous  goals,  but  is  also  necessary	in
       itself, and so will be done also.

       I do intend to maintain complete binary compatibility, so that older programs will go on working.

       As  internal  changes are made, the drivers have to be changed as well. For some of the older drivers (ali, ark, ati, et3000, et4000, gvga,
       oak), I no longer get any reports, so I don't know if they still work. Some features are also lost, for example,  linear  frame	buffer	on
       non-PCI	cards.	This  should not be a very big problem, as users with such cards can go on using 1.3.1, as most changes are not applicable
       for older machines.

SEE ALSO

       svgalib(7), libvga.config(5).

AUTHOR

       This file was written by Michael Weller <eowmob@exp-math.uni-essen.de>, And later changed by Matan Ziv-Av.

Svgalib 1.4.1							    10 Jun 1999 						    svgalib.faq(7)