data transfer from serial port Post: 302245700

9 More Discussions You Might Find Interesting

1. SCO

Serial File Transfer

I need to transfer files from a sco/unix system to a windows xp system and they are only connected via a digiboard serial connection. The terminal emulation software connects and runs a program but I need to transfer files. Anyone know a good solution?

2. Programming

how i can transfer and receive file in any format over serial port

helo i m using fedora core 6 o.s. i want to develop application using c,c++ which transfer file in any format(like pdf,txt,doc etc) over the serial port and i want to receive the same file from the serial port please guide me. amit

3. SCO

Need some advice concerning file transfer with a serial connection

Hi, I have a SCO Unix ver 5.0.7 from which I need to get some files. The problem is that I'm working remotely (have no physical access) and using Dejawin because this server is only has a serial connection to a Windows machine. Ucopy isn't on the server. What I was thinking is to do a print...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Shell Programming and Scripting

file transfer using AWK over serial port

I have a unix system that only has AWK to program with which hooks up to a windows or linux based system with all progamming and software capabilities. The link between the systems is typically a 9600 baud TTY port on the AWK system and COM1 on the other system. I can cat <filenm> from the unix...

6. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

7. Programming

Serial file transfer protocol / checksums

Hello ppl, I'm working on a windows program simulating an existing Unix program, the program is a firmware downloader, it sends a binary firmware file through the serial port (rs232) to a Set-Top Box running under unix system too, as i'm a poor unix user and not a unix programmer i choosed the...

8. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

9. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT PHP

uusched

uusched(1M)						  System Administration Commands					       uusched(1M)

NAME

       uusched - uucp file transport program scheduler

SYNOPSIS

       /usr/lib/uucp/uusched [-u debug-level] [-x debug-level]

DESCRIPTION

       uusched	is  the   uucp(1C) file transport scheduler. It is usually started by the daemon uudemon.hour that is started by  cron(1M) from an
       entry in user uucp's crontab file:

	      11,41 * * * * /etc/uucp/uucp/uudemon.hour

OPTIONS

       The options are for debugging purposes only. debug-level is a number between  0 and  9. Higher numbers give more detailed debugging  infor-
       mation:

       The following options are supported:

       -u debug-level  Passes the -u debug-level option  uucico(1M) as -x debug-level.

       -x debug-level  Outputs debugging messages from	uusched.

FILES

       /etc/uucp/Devices

       /etc/uucp/Permissions

       /etc/uucp/Systems

       /var/spool/locks/*

       /var/spool/uucp/*

       /var/spool/uucppublic/*

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWbnuu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       uucp(1C), uustat(1C), uux(1C), cron(1M), uucico(1M), attributes(5)

SunOS 5.10							    19 May 1993 						       uusched(1M)