- Enter the SMS menu
- Select "Start Maintenance Mode for System Recovery"
- Select "Access a Root Volume Group"
- Select one the VG which has the hdisks in it which looks like your rootvg, I guess hdisk0 and 1 if you have hopefully a mirrored rootvg
- Select "Access this Volume Group and start a shell before mounting file systems"
- then do following, using jfs or jfs2:
Then have a reboot and hope it's working. Right from the AIX Sys Admin II: Problem Determination.
Last edited by zaxxon; 10-10-2008 at 01:07 AM..
Reason: typo, jfs2 not jds2 :)
Hi,
I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed:
Boot device: net file and args:
Network link setup failed
Please check cable and try... (3 Replies)
Hi all ,
i was trying to upgrade firmware on machine 7028-6E4 and it failed .
Now machine does not boot anymore , i can not get SMC menu either ...
What are my options ?
Thanks,
Rahim (1 Reply)
Hi guys,
The data store behind our CVS server is on a windows box for reasons best known to my predecessors. Therefore the CVSROOT is a cifs mount point, actually it's /mnt/CVS but that's by the by.
The problem I have is that CVSWeb fails to recognise mount points as directories, and tells... (0 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the... (0 Replies)
i have a Simple Tech hard drive that i use between two computers. it is formatted to ntfs. i have a dell desktop with Ubuntu 7.10 and Ubuntu 8.04 and Windows XP Home. and i have a laptop with Ubuntu 7.10 and Ubuntu 8.04. the laptop recognizes the hard drive on both 8.04 and 7.10 but my desktop... (9 Replies)
I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed.
I tried diffrent Linux distributions, but nothing works.
This are the partitions, maybe it's... (12 Replies)
I compiled new kernel in linux 10.04 called linux-2.6.26.8-xenomai, it runs alongside the other kernel, but when I want to boot it I get an error message saying:
Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda5 does not exist.
After making the modules and headers
I made the... (4 Replies)
I am able to mount samba but it just won't mount when i reboot system
what is stopping it from mounting after reboot?
I mounted before reboot but right after reboot...i ran mount
# mount
/dev/mapper/vg_sda2-lv_root on / type ext4 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs... (0 Replies)
Can anyone offer any advice on how to modify the script below to work on a new system we have, that has no graphics capability? We admin the system through a serial RAS device. I've tried running the below script through the RAS and through an ssh -X session. It failed with something like "GTK... (3 Replies)
Discussion started by: yelirt5
3 Replies
LEARN ABOUT CENTOS
jfs_fscklog
jfs_fscklog(8) Extract/Display JFS fsck Log jfs_fscklog(8)NAME
jfs_fscklog - extract a JFS fsck service log into a file and/or format and display the extracted file
SYNOPSIS
jfs_fscklog [ -d ] [ -e device ] [ -f output.file ] [ -p ] [ -V ]
DESCRIPTION
jfs_fscklog with option -e device extracts the contents of either the most recent or immediately prior (specified with option -p) JFS fsck
service log from the specified device, and writes the output to a file. The file name may be specified with the -f option, or the default
file name is <pwd>fscklog.new. If the -p option is used, the default file name is <pwd>fscklog.old.
jfs_fscklog with option -d formats and displays the contents of the extracted file.
jfs_fscklog with options -d and -e device extracts and displays the JFS fsck service log.
OPTIONS -d Format and display a previously extracted JFS fsck service log.
-e device
Extract the JFS fsck service log from device and store it in a file. (device is the special file name corresponding to the actual
device from which the fsck log will be extracted (e.g. /dev/hdb1 )).
-f file.name
Specify the file name, overriding the default file name. When used with -e device, file.name specifies the name of the file into
which the JFS fsck log will be extracted. When used with -d, file.name specifies the name of the extracted file whose contents will
be formatted and displayed.
file.name must be 127 characters or less in length.
file.name will be created in the present working directory unless it is fully qualified.
-p Extract the prior log (as opposed to the most recent log).
-V Print version information and exit (regardless of any other chosen options).
EXAMPLES
Extract the most recent JFS fsck log on /dev/hda5 into <pwd>fscklog.new:
jfs_fscklog -e /dev/hda5
Extract the most recent JFS fsck log on /dev/hdb3 into /temp/l9651107.log:
jfs_fscklog -e /dev/hdb3 -f /temp/l9651107.log
Display the JFS fsck log that was extracted into /temp/l9651107.log:
jfs_fscklog -d -f /temp/l9651107.log
Extract and display the previous JFS fsck log from /dev/hda8:
jfs_fscklog -e /dev/hda8 -d -p
REPORTING BUGS
If you find a bug in JFS or jfs_fscklog, please report it via the bug tracking system ("Report Bugs" section) of the JFS project web site:
http://jfs.sourceforge.net/
Please send as much pertinent information as possible, including any jfs_fscklog error messages and the complete output of running jfs_fsck
with the -v option on the JFS device.
SEE ALSO jfs_fsck(8), jfs_mkfs(8), jfs_tune(8), jfs_logdump(8), jfs_debugfs(8)AUTHOR
Barry Arndt (barndt@us.ibm.com)
jfs_fscklog is maintained by IBM.
See the JFS project web site for more details:
http://jfs.sourceforge.net/
October 28, 2002 jfs_fscklog(8)