Solaris 10. fcinfo hba-port shows adapter not Found Post: 302244901

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight....

2. UNIX for Dummies Questions & Answers

isa serial port adapter card no longer detectedworking

hi all, i've got an old PC with unix (SCO System V/386 rel. 3.2) on it. Pentium I; 128mb; ISA 2-port RS232 serial adapter card for an oki dot-matrix printer. (no usb, no CD) i've been running an old cobol program to do some invoicing and print reports. some time back i changed the...

3. IP Networking

4GB Dual Port HBA

I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB? Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks.

4. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Hi All, I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices.. bash-2.05# luxadm -e port Found path to 0 HBA ports bash-2.05# luxadm probe No Network Array enclosures found in /dev/es...

5. AIX

20EE0008 : No adapters found Adapter, Riser, System Bd.

Hello, When I try to upgrade AIX from 5.1 to 5.3 I get this error message 20EE0008 : No adapters found Adapter, Riser, System Bd. Anyone know anything about it ?

6. Solaris

Few things related to HBA port & fcinfo command

Hi Gurus I need to know few things related to HBA port & fcinfo command I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above...

7. Solaris

luxadm -e port shows one port not connected

hi i have a sun machine which has one hba 2ports; out of which one port says it is not connected # luxadm -e port /devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED /devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED but both...

8. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

9. AIX

NPIV with 8Gb PCI Express Dual Port FC Adapter

All I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable: $ lsnports name physloc ...

10. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

LEARN ABOUT OPENSOLARIS

i286

machid(1)							   User Commands							 machid(1)

NAME

       machid, sun, iAPX286, i286, i386, i486, i860, pdp11, sparc, u3b, u3b2, u3b5, u3b15, vax, u370 - get processor type truth value

SYNOPSIS

       sun

       iAPX286

       i386

       pdp11

       sparc

       u3b

       u3b2

       u3b5

       u3b15

       vax

       u370

DESCRIPTION

       The following commands will return a true value (exit code of 0) if you are using an instruction set that the command name indicates.

       sun	  True if you are on a Sun system.

       iAPX286	  True if you are on a computer using an iAPX286 processor.

       i386	  True if you are on a computer using an iAPX386 processor.

       pdp11	   True if you are on a PDP-11/45tm or PDP-11/70tm.

       sparc	  True if you are on a computer using a SPARC-family processor.

       u3b	  True if you are on a 3B20 computer.

       u3b2	  True if you are on a 3B2 computer.

       u3b5	  True if you are on a 3B5 computer.

       u3b15	  True if you are on a 3B15 computer.

       vax	  True if you are on a VAX-11/750tm or VAX-11/780tm.

       u370	  True if you are on an IBM(R) System/370tm computer.

       The  commands  that  do	not  apply will return a false (non-zero) value. These commands are often used within makefiles (see make(1S)) and
       shell scripts (see sh(1)) to increase portability.

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       make(1S), sh(1), test(1), true(1), uname(1), attributes(5)

NOTES

       The machid family of commands is obsolete. Use uname -p and uname -m instead.

SunOS 5.11							    5 Jul 1990								 machid(1)

10 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Discussion started by: GoneCrazy

2. UNIX for Dummies Questions & Answers

isa serial port adapter card no longer detectedworking

Discussion started by: frankpky

3. IP Networking

4GB Dual Port HBA

Discussion started by: jwholey

4. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Discussion started by: ilan