Lets see what we got first so we can help you out a little more
issue a `modinfo` and let see what drivers the kernel is trying to use.
issue a `prtconf` and this should give us if the hba is sd or ssd (not at work so i can't be 100% sure. if its not the right command, i can post a bit later with what i'm looking for).
my thoughts are that you are trying to bind a lpfc to an sfs (emlx) driver. so issue a:
Code:
set_emlxs fc10
i maybe wrong but i think you can also issue
Code:
set_emlx_sun
and this will bind emlx sfs drivers (not native leadville) to all sun branded devices. i believe the '-s' at the end of LP11000-S means its a sun-branded device.
see if this helps you. also, i think there will be a situation were when you view the physical device path, you will see lpfc even though you have loaded emlx drivers. however, there are two ways of changing this. one is at the OBP and the other can be done without restarting the box. but if/when you get there... lets figure that out.
I have this problem when i integrate a new san switch in DFM 3.01 R1 :
dfm fcswitch add switchname1
Error: Host switchname2 (11197) already exists.
switchname2 is a similar san switch but in another fabric, switchname2 is already integrated in DFM database.
Bests Regards
Olivier (2 Replies)
Hello,
I am new on solaris. We will connect our sun solaris system to the SAN and add 2 Emulex card on the system (solaris 9).
Who have already done this and can give me the procedure to follow ?
driver to install
multipath
etc...
Thanks in advance
Emmanuel (1 Reply)
Hello!
I'm having problems to install Emulex fibrechannel card drivers to a HP DL580 G5 running Solaris 10 x86_64. Any of you guys had this problem or knows the answer? =)
cfgadm gives me the following info, which seems to say that it is ok?
But the card has'nt logged into the switch... (0 Replies)
Hi,
I need to increase a veritas filesystem I have currently mounted on a Solaris 10 server. We can resize the LUN on the NetApp filer no problem. What I need to know is what do I do next on the Solaris 10 server I have so that it will see the increase in size. Do I run 'devfsadm' to... (3 Replies)
Hi all
We have a couple of solaris zones running a jboss app in a cluster. Each zone has a shared netapp volume mounted to /app/xxx with everything under that subdir apart from jboss which is local to each zone in /app/jboss-3.2.5
There is a symlink in /app/xxx/jboss-3.2.5 which points to... (0 Replies)
What command can I use to find out details about a netapp filer.
I have a directory that is a filer i would like to know details about the source host/folder that it points to.
Thanks. (2 Replies)
Hi
I have NetApp lun, that was mounted on server as a file system that failed, and that server is no longer in use, but I would like to use that file system on another server. The NetApp Admin, told me he can present that lun to my other system, but my problem is how to mount it? Because that... (8 Replies)
The chassis config is right... this blade can boot to VMware ESXi and see HBAs and LUNs. Solaris isn't seeing the HBAs at all... luxadm probe returns ERROR: No Fibre Channel Adapters found.
fcinfo hba-port -l returns No Adapters Found.
prtdiag -v gets me:
==== Upgradeable Slots... (3 Replies)
Discussion started by: jnojr
3 Replies
LEARN ABOUT SUNOS
hba_getnumberofadapters
HBA_GetNumberOfAdapters(3HBAAPI) Common Fibre Channel HBA Information Library Functions HBA_GetNumberOfAdapters(3HBAAPI)NAME
HBA_GetNumberOfAdapters - report the number of HBAs known to the Common Library
SYNOPSIS
cc [ flag... ] file... -lHBAAPI [ library... ]
#include <hbaapi.h>
HBA_UINT32 HBA_GetNumberOfAdapters(void);
DESCRIPTION
The HBA_GetNumberOfAdapters() function report the number of HBAs known to the Common Library. This number is the sum of the number of HBAs
reported by each VSL loaded by the Common Library.
RETURN VALUES
The HBA_GetNumberOfAdapters() function returns the number of adapters known to the Common Library will be returned.
EXAMPLES
Example 1: Using HBA_GetNumberOfAdapters()
numberOfAdapters = HBA_GetNumberOfAdapters();
for (hbaCount = 0; hbaCount < numberOfAdapters; hbaCount++) {
/* ... */
}
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard: FC-MI 1.92 (API |
| |version 1) |
+-----------------------------+-----------------------------+
| |Standard: FC-HBA Version 4 |
| |(API version 2) |
+-----------------------------+-----------------------------+
|MT-Level |Safe |
+-----------------------------+-----------------------------+
SEE ALSO libhbaapi(3LIB), attributes(5)
T11 FC-MI Specification
SunOS 5.10 1 Sep 2003 HBA_GetNumberOfAdapters(3HBAAPI)
10-08-2008
