IPL(4)							     Kernel Interfaces Manual							    IPL(4)

NAME

       ipl - IP packet log device

DESCRIPTION

       The ipl pseudo device's purpose is to provide an easy way to gather packet headers of packets you wish to log.  If a packet header is to be
       logged, the entire header is logged (including any IP options - TCP/UDP options are not included when it calculates header size) or not	at
       all.   The  packet  contents  are  also	logged after the header.  If the log reader is busy or otherwise unable to read log records, up to
       IPLLOGSIZE (8192 is the default) bytes of data are stored.

       Prepending every packet header logged is a structure containing information relevant to the packet following and why it	was  logged.   The
       structure's format is as follows:

       /*
	* Log structure.  Each packet header logged is prepended by one of these.
	* Following this in the log records read from the device will be an ipflog
	* structure which is then followed by any packet data.
	*/
       typedef struct iplog    {
	       u_long  ipl_sec;
	       u_long  ipl_usec;
	       u_int   ipl_len;
	       u_int   ipl_count;
	       size_t  ipl_dsize;
	       struct  iplog   *ipl_next;
       } iplog_t;

       typedef struct  ipflog  {
       #if (defined(NetBSD) && (NetBSD <= 1991011) && (NetBSD >= 199603))
	       u_char  fl_ifname[IFNAMSIZ];
       #else
	       u_int   fl_unit;
	       u_char  fl_ifname[4];
       #endif
	       u_char  fl_plen;        /* extra data after hlen */
	       u_char  fl_hlen;        /* length of IP headers saved */
	       u_short fl_rule;        /* assume never more than 64k rules, total */
	       u_32_t  fl_flags;
       } ipflog_t;

       When reading from the ipl device, it is necessary to call read(2) with a buffer big enough to hold at least 1 complete log record - reading
       of partial log records is not supported.

       If the packet contents are more than 128 bytes when log body is used, then only 128 bytes of the packet contents are logged.

       Although it is only possible to read from the ipl device, opening it for writing is required when using an ioctl which changes  any  kernel
       data.

       The  ioctls  which  are	loaded with this device can be found under ipf(4).  The ioctls which are for use with logging and don't affect the
       filter are:

	       ioctl(fd, SIOCIPFFB, int *)
	       ioctl(fd, FIONREAD, int *)

       The SIOCIPFFB ioctl flushes the log buffer and returns the number of bytes flushed.  FIONREAD returns the number of  bytes  currently  used
       for  storing  log data.	If IPFILTER_LOG is not defined when compiling, SIOCIPFFB is not available and FIONREAD will return but not do any-
       thing.

       There is currently no support for non-blocking IO with this device, meaning all read operations should be considered blocking in nature (if
       there is no data to read, it will sleep until some is made available).

SEE ALSO

       ipf(4)

BUGS

       Packet headers are dropped when the internal buffer (static size) fills.

FILES

       /dev/ipl0

																	    IPL(4)