10-04-2008
Kindly post the o/p of:
"uname -a" and "grep -i 'version' /var/adm/messages"
10 More Discussions You Might Find Interesting
1. UNIX for Advanced & Expert Users
Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight.... (1 Reply)
Discussion started by: GoneCrazy
1 Replies
2. UNIX for Dummies Questions & Answers
hi all,
i've got an old PC with unix (SCO System V/386 rel. 3.2) on it.
Pentium I; 128mb; ISA 2-port RS232 serial adapter card for an oki dot-matrix printer. (no usb, no CD)
i've been running an old cobol program to do some invoicing and print reports.
some time back i changed the... (0 Replies)
Discussion started by: frankpky
0 Replies
3. IP Networking
I have one 4GB, dual port HBA. Is each port rated for 4GB, or is it the whole HBA rated for 4GB?
Also, how do I determine which is port0 / port1 with "lscfg -vl fcs0" command. Thanks. (0 Replies)
Discussion started by: jwholey
0 Replies
4. Solaris
Hi All,
I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices..
bash-2.05# luxadm -e port
Found path to 0 HBA ports
bash-2.05# luxadm probe
No Network Array enclosures found in /dev/es... (7 Replies)
Discussion started by: ilan
7 Replies
5. AIX
Hello,
When I try to upgrade AIX from 5.1 to 5.3 I get this error message
20EE0008 : No adapters found Adapter, Riser, System Bd.
Anyone know anything about it ? (1 Reply)
Discussion started by: filosophizer
1 Replies
6. Solaris
Hi Gurus
I need to know few things related to HBA port & fcinfo command
I have a server where there are 4 HBA ports cards are their. Out of 4 ports 2 are in use & 2 are not in use when I check it physicall. Now I want to know the command through which I can get information about all above... (6 Replies)
Discussion started by: girish.batra
6 Replies
7. Solaris
hi i have a sun machine which has one hba 2ports;
out of which one port says it is not connected
# luxadm -e port
/devices/pci@1d,700000/SUNW,qlc@1/fp@0,0:devctl CONNECTED
/devices/pci@1d,700000/SUNW,qlc@1,1/fp@0,0:devctl NOT CONNECTED
but both... (9 Replies)
Discussion started by: anwesh
9 Replies
8. Solaris
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
Discussion started by: rishiraaz
7 Replies
9. AIX
All
I am at a loss with a VIO server running ios 2.2.0.10-FP-24 SP-01. The VIO server is fitted with two 8Gb PCI Express Dual Port FC Adapters. However when I run the lsnports command only two of the adapter ports show as capable:
$ lsnports
name physloc ... (4 Replies)
Discussion started by: johnf
4 Replies
10. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
LEARN ABOUT OSF1
llconvert
llconvert(8) System Manager's Manual llconvert(8)
NAME
llconvert - Modify lastlog records from DIGITAL UNIX releases 4.0x and prior to new format
SYNOPSIS
/usr/lbin/llconvert [-vnrp?h] input_file [output_file]
OPTIONS
Restore new format to old format. Verbose. Display lines while converting. Do not preserve contents of input file. Formatted print only.
Do not convert. (May be used with the -r option). Display usage message.
DESCRIPTION
The llconvert command reads records from the lastlog file, such as /var/adm/lastlog, and converts the record format to the updated struct
lastlog format. If no output file is specified or if the output file path is identical to the input file path, llconvert makes a backup
copy of the original input file using the following algorithm: If filename.orig exists. Where n is a unique number.
The llconvert command attempts to detect an input file that is in the wrong format (for example, input file is already a new format file).
A warning message is issued in this case, but conversion continues.
RETURN VALUES
Success. An error occurred.
EXAMPLES
To convert an old format accounting file to the new format: llconvert /var/adm/lastlog.prev
Upon completion of this command, /var/adm/lastlog.prev will have been converted to the new format. The original /var/adm/last-
log.prev is renamed to:
/var/adm/lastlog.prev.orig To convert a lastlog file in new format to the old format: llconvert -r /var/adm/lastlog /var/adm/last-
log.old
FILES
Lastlog header file that defines the format for the lastlog file. The active lastlog file.
SEE ALSO
Commands: finger(1)
llconvert(8)