How do I create a bootable mksysb image file Post: 302243279

9 More Discussions You Might Find Interesting

1. AIX

mksysb and boot.image

hello i saved my system this morning, mksysb tape, and i have the message: "boot.image exceeded the size....." i have not the end because the message is disappeared. where can i find the mksysb message in a log ? the message is scary ? thank you

2. AIX

mksysb file image

Hello, I have an mksysb image in my disk, created like: # mksysb -i /mnt/backup/lpar2.image I want to know if this image could be copied to a tape and make it a boot image. Thanks Enzote

3. AIX

check whether a mksysb image is bootable or not?

Hi, Can any one please tell me the method to check whether a mksysb image which is in the server is bootable or not. :confused: Thanks in advance, Anoop

4. AIX

bootable mksysb image on

i have been given a bootable cd/dvd, that i install a ibm aix 185 workstation with, i want to make a nim mksysb resource from that, the following is a listing for the root file structure of the cd/dvd, seems someone took a mksysb of a built ibm aix machine and did mkcd -L -S -I and setup the...

5. Linux

Create a bootable PXE image from build kernel source code

Hi, Can i just ask how I can create a bootable PXE image from the built kernel source. What files do I need to get? Thanks!

6. AIX

DR using a mksysb image on disk.

This may be a dumb question and the more I think about it the worst it seems!! I have inherited some standalone systems where they are using the mksysb command to create a disk file image; this image is then backed up to Networker. My dumb question is how would we go about restoring this...

7. AIX

Using mkdvd to create bootable mksysb on dvd reports success but nothing on dvd?

Hello, Running AIX 7.1 7100-00-03-1115, trying to make a mksysb image to a dvd drive using mkdvd. My final command looks like this.. mkdvd -e -V rootvg -R -C /usr1/AIXADMIN/mkcd/cd_fs -I /usr1/AIXADMIN/mkcd/cd_images -M /usr1/AIXADMIN/mkcd/mksysbimage -d /dev/cd0 -Y When i run this...

8. Red Hat

Trouble creating RHEL 6.5 bootable image with custom kickstart file

Hi everyone, I have a custom kickstart file from a software vendor and I'm trying to package that with a RHEL 6.5 and then attach it to a VM and install RHEL with the settings in the kickstarter file. I'm doing this from a windows PC using an app called InfraRecorder. I've extracted the...

9. AIX

Can I use mkdvd to create bootable DVD from mksysb on tape

Hi, Is it possible to use mkdvd to create a bootable DVD using a mksysb on tape as the source image? On the system concerned, we don't have enough free space to create the mksysb to file first, so would like to use the existing tape mksysb backup. The DVD disk/s will then be used to boot a...

LEARN ABOUT CENTOS

scsieject

scsieject(1)						      General Commands Manual						      scsieject(1)

NAME

       scsieject - control SCSI tape devices

SYNOPSIS

       scsieject [-f <scsi-generic-device>] commands

DESCRIPTION

       The scsieject command controls SCSI devices in a platform-independent manner. As long as 'mtx' works on the platform, so does 'scsieject'.

OPTIONS

       The first argument, given following -f , is the SCSI generic device corresponding to your tape drive.  Consult your operating system's doc-
       umentation for more information (for example, under Linux  these  are  generally  /dev/sg0  through  /dev/sg15,	under  FreeBSD	these  are
       /dev/pass0  through  /dev/passX.  Under Solaris this is usually the same as your tape drive (Solaris has a SCSI passthrough ioctl). You can
       set the STAPE or TAPE environment variable rather than use -f.

COMMANDS

       load	 Load the medium into the drive.  When this command is issued to a CD/DVD drive  and  the  tray  is  extended  the  tray  will	be
		 retracted if the drive is capable of it.

       unload	 Unload  the medium from the drive (also known as eject).  When this command is issued to a CD/DVD drive or a tape drive the media
		 will be ejected if the device supports it.

       start	 Start the device.  Some devices require a start command after a media changer has loaded new media into the device.

       stop	 Stop the device.  Some devices require a stop command prior to unloading the medium from the device when using a media changer.

       lock	 Lock the device.  Locks the device so that the medium cannot be removed manually.

       unlock	 Unlock the device.  Unlocks the device so that the medium can be removed manually.

AUTHORS

       This program was written by Robert Nelson <robertnelson@users.sourceforge.net> based on the scsitape program  written  by  Eric	Lee  Green
       <eric@badtux.org>.  Major portions of the 'mtxl.c' library used herein were written by Leonard Zubkoff.

HINTS

       Under  Linux,  cat /proc/scsi/scsi will tell you what SCSI devices you have.  You can then refer to them as /dev/sga, /dev/sgb, etc. by the
       order they are reported.

       Under FreeBSD, camcontrol devlist will tell you what SCSI devices you have, along with which pass device controls them.

       Under Solaris 7 and 8, /usr/sbin/devfsadm -C will clean up your /devices directory. Then find /devices -name 'st@*' -print  will  return  a
       list of all tape drives. /dev on Solaris is apparently only of historical interest.

BUGS AND LIMITATIONS

       There are no known bugs or limitations.

AVAILABILITY

       This version of scsieject is currently being maintained by Robert Nelson <robertnelson@users.sourceforge.net> as part of the 'mtx' suite of
       programs. The 'mtx' home page  is  http://mtx.sourceforge.net  and  the	actual	code  is  currently  available	there  and  via  SVN  from
       http://sourceforge.net/projects/mtx.

SEE ALSO

       loaderinfo(1),tapeinfo(1),mtx(1)

								   scsieject1.0 						      scsieject(1)