Qlogic HBA card in E450 with errors Post: 302242734

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to...

2. UNIX for Advanced & Expert Users

Sun internal disks and HBA card

I have a V490 that has couple internal disks attached to the same dual-port HBA card that I'm planning attach to the SAN for additional storage. Would I sacrifice performance if I use the same HBA? Is it better to throw in a new HBA instead?

3. AIX

Need HBA card driver

Hi All, SUN emulex HBA card has been installed on P520 box. When i run the cfgmgr i am getting the following message. lpar2#cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed....

4. Solaris

Qlogic HBA's - lputil / lpfc.conf

Hi all Hope your all well and happy in solaris land :-) Recently purchased some Qlogic HBA's for a few solaris servers. Was told that you cant have mixed chipsets and as this client is all qlogic, have to have hba's using qlogic. 1) Is that correct ? Cant mix different chipsets of...

5. Solaris

Qlogic HBA + Veritas - Part 2

Hi all, New to the world of SAN, so forgive me for any ambigious terminology. I have a sun 6800 chassis with two domains, both domains connected to a San ancor sanbox ( 2 x Storeedge T3 / Mcdata switch ). Current Qlogic HBA's are 1Gb glc adaptors, version of qlc drivers...

6. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Hi All, I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices.. bash-2.05# luxadm -e port Found path to 0 HBA ports bash-2.05# luxadm probe No Network Array enclosures found in /dev/es...

7. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

8. Solaris

Which FC HBA card support Solaris9

I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage. in OK prompt, PROBE-SCSI-ALL showing A5000 fc hdds details in ok prompt..... but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000...

9. Red Hat

lun masking at qlogic HBA level

need to do LUN masking at qlogic HBA level..at RHEL 5.x I am using qla* module at part of the Unix kernel, it is not OEM drivers that come with the HBA card, so I can't use Sansurfer to do this.. Is there a way to do this at all ?? :wall:

10. Red Hat

HBA card faulty

Hi, How to determine if HBA card in getting faulty from linux host ? any pointers.

LEARN ABOUT CENTOS

zip_set_archive_comment

ZIP_SET_ARCHIVE_COMMENT(3)				     Library Functions Manual					ZIP_SET_ARCHIVE_COMMENT(3)

NAME

       zip_set_archive_comment - set zip archive comment

LIBRARY

       libzip (-lzip)

SYNOPSIS

       #include <zip.h>

       int zip_set_archive_comment(struct zip *archive); "const char *comment" "int len"

DESCRIPTION

       The  zip_set_archive_comment  function  sets  the comment for the entire zip archive.  If comment is NULL and len is 0, the archive comment
       will be removed.

RETURN VALUES

       Upon successful completion 0 is returned.  Otherwise, -1 is returned and the error information in archive is set to indicate the error.

ERRORS

       zip_set_archive_comment fails if:

	      [ZIP_ER_INVAL]
		  len is less than 0 or longer than the maximum comment length in a zip file (65535).

	      [ZIP_ER_MEMORY]
		  Required memory could not be allocated.

SEE ALSO

       libzip(3), zip_get_archive_comment(3), zip_get_file_comment(3), zip_set_file_comment(3)

AUTHORS

       Dieter Baron <dillo@giga.or.at> and Thomas Klausner <tk@giga.or.at>

NiH								 October 26, 2007					ZIP_SET_ARCHIVE_COMMENT(3)