Qlogic HBA card in E450 with errors Post: 302242653

10 More Discussions You Might Find Interesting

1. Solaris

HBA Card

Hello...I got a problem here. I have HBAs installed in one of the domains in E20 and I gotta find out the brand and firmware. But when I do a prtconf, I cannot see the HBA. For other servers installed with HBAs, when I do prtconf on them I can see either qlc or em. Can you guys enlighten me how to...

2. UNIX for Advanced & Expert Users

Sun internal disks and HBA card

I have a V490 that has couple internal disks attached to the same dual-port HBA card that I'm planning attach to the SAN for additional storage. Would I sacrifice performance if I use the same HBA? Is it better to throw in a new HBA instead?

3. AIX

Need HBA card driver

Hi All, SUN emulex HBA card has been installed on P520 box. When i run the cfgmgr i am getting the following message. lpar2#cfgmgr cfgmgr: 0514-621 WARNING: The following device packages are required for device support but are not currently installed....

4. Solaris

Qlogic HBA's - lputil / lpfc.conf

Hi all Hope your all well and happy in solaris land :-) Recently purchased some Qlogic HBA's for a few solaris servers. Was told that you cant have mixed chipsets and as this client is all qlogic, have to have hba's using qlogic. 1) Is that correct ? Cant mix different chipsets of...

5. Solaris

Qlogic HBA + Veritas - Part 2

Hi all, New to the world of SAN, so forgive me for any ambigious terminology. I have a sun 6800 chassis with two domains, both domains connected to a San ancor sanbox ( 2 x Storeedge T3 / Mcdata switch ). Current Qlogic HBA's are 1Gb glc adaptors, version of qlc drivers...

6. Solaris

Solaris9 - qlogic HBAs - luxadm reports "Found path to 0 HBA ports"

Hi All, I'm actually trying to configure a Qlogic HBA on a solaris9 connecting in a Brocade SAN. I installed Solaris9 and now trying to look at FC devices.. bash-2.05# luxadm -e port Found path to 0 HBA ports bash-2.05# luxadm probe No Network Array enclosures found in /dev/es...

7. Solaris

How to enable hba port of a two port hba card

Hi, i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port. ---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ---------- please help :(

8. Solaris

Which FC HBA card support Solaris9

I have JNI FCE-6460-N fc card , it is detected in OK prompt.....I connected Sun StorEDGE A5000 FC storage. in OK prompt, PROBE-SCSI-ALL showing A5000 fc hdds details in ok prompt..... but in OS level.....not showing the hdd, i tried in DEVFSADM command and FORMAT command not showing A5000...

9. Red Hat

lun masking at qlogic HBA level

need to do LUN masking at qlogic HBA level..at RHEL 5.x I am using qla* module at part of the Unix kernel, it is not OEM drivers that come with the HBA card, so I can't use Sansurfer to do this.. Is there a way to do this at all ?? :wall:

10. Red Hat

HBA card faulty

Hi, How to determine if HBA card in getting faulty from linux host ? any pointers.

LEARN ABOUT DEBIAN

ql-hba-snapshot

ql-hba-snapshot(8)					       System Administration						ql-hba-snapshot(8)

NAME

       ql-hba-snapshot - display specific information of the QLogic HBA.

SYNOPSIS

       ql-hba-snapshot <Host number> [OPTIONS]

DESCRIPTION

       FC HBA Snapshot Utility

       This  utility  displays	the  details  of  the QLogic HBA attached to the system. It uses one of the two file systems for scanning: proc or
       sysfs.

       <Host number> | <-a/--all> [optional]

	      Provide the <HOST NUMBER> to display the detailed information of the HBA.  With no option  specified,  general  information  of  all
	      hosts  will  be  displayed.   Ex.  # /usr/sbin/ql-hba-snapshot <Host Number> # /usr/sbin/ql-hba-snapshot --procfs <Host Number> (For
	      procfs)

       -h, --help

	      Prints the help message.	Ex.  # /usr/sbin/ql-hba-snapshot --help

       -hl, --hostlist

	      This option displays the list of QLogic hosts (HBAs) connected to this system.  The <HOST NUMBER> can be obtained by using following
	      command Ex.  # /usr/sbin/ql-hba-snapshot --hostlist

       -p, --parameters

	      This  option  displays  the  command  line parameters that can be passed to the QLogic HBA driver.  Ex.  # /usr/sbin/ql-hba-snapshot
	      --parameters <Host Number>

       -s, --statistics

	      This option displays the statistical information for specified host. Stastics option is only supported in "sysfs" based  scan.   Ex.
	      # /usr/sbin/ql-hba-snapshot --statistics <Host number/--all>

       -proc, --procfs

	      This options forces the the utility to scans information based on "procfs", instead of default sysfs.  Ex.  # /usr/sbin/ql-hba-snap-
	      shot --procfs [Other valid option]

       -v, --verbose

	      This enables verbose display. The detailed information of LUNs will be displayed in addition to standard one.  This option  is  only
	      supported in sysfs.  Ex.	# /usr/sbin/ql-hba-snapshot --verbose <Host number/-a>

SEE ALSO

       ql-dynamic-tgt-lun-disc(8), ql-lun-state-online(8), ql-set-cmd-timeout(8)

Matthias Schmitz <;matthias@sigxcpu.org> 			     July 2009							ql-hba-snapshot(8)