I installed a FC array for the first time and everything looks OK
in mpathadm, cfgadm, but I don't know what to do next.
Code:
# stmsboot -L
non-STMS device name STMS device name
------------------------------------------------------------------
/dev/rdsk/c2t1d0 /dev/rdsk/c4t600A0B80004876380000035348E0A274d0
/dev/rdsk/c3t5d0 /dev/rdsk/c4t600A0B80004876380000035348E0A274d0
Code:
# format
Searching for disks...done
c2t1d31: configured with capacity of 16.00MB
c3t5d31: configured with capacity of 16.00MB
c4t600A0B80004876380000035348E0A274d0: configured with capacity of 272.44GB
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd 16 sec 273>
/pci@400/pci@0/pci@8/scsi@0/sd@0,0
1. c2t1d31 <SUN-UniversalXport-0660 cyl 8 alt 2 hd 64 sec 64>
/pci@500/pci@0/pci@c/SUNW,qlc@0/fp@0,0/ssd@w200400a0b8487639,1f
2. c3t5d31 <SUN-UniversalXport-0660 cyl 8 alt 2 hd 64 sec 64>
/pci@500/pci@0/pci@d/SUNW,qlc@0/fp@0,0/ssd@w200500a0b8487639,1f
3. c4t600A0B80004876380000035348E0A274d0 <SUN-CSM200_R-0660 cyl 34872 alt 2 hd 256 sec 64>
/scsi_vhci/ssd@g600a0b80004876380000035348e0a274
Specify disk (enter its number):
If I select 3 it says
[disk formated]
Disk no labeled. Label it now?
I used the Common Array Manager (CAM) to set this up with a pool,
virtual disks, and hosts, but should I format the disk?
What is the next procedure here to view the 272 GB?
I need information what maximum error level on FC card need clasification of critical level (SAN mass storidge)
Please write screenshot from utility fcutil whith test option.
Pawel (0 Replies)
Hi,
We have 12x1TB SATA disks in our array and I need to create 10TB volume. I defined new storage profile on array and when I tried to add volume, I faced with ~2TB limit for new volumes. I didn't find how to set another limit on my storage profile. Is there is a way to configure one large... (3 Replies)
Hello,
Wondering if anyone can help me with mounting a file share from my Sun T2000 server running Solaris 10 to my connected 2530 disk array?
I believe I've connected the disk array correctly and I have created a volume on the array using the filesystem (Sun_SAM-FS, RAID-5).
The T2000... (15 Replies)
Hi!
I have Sun StorageTek 2540 FC array and CAM works very slowly - I can wait for software response even more than 2 minutes... I run this software on Windows machine with Firefox Web Browser but speed is terrible... How can I make it works at least a little bit faster?.. (2 Replies)
In Sun manuals, I didn't find how to backup Sun StorageTek Common Array Manager's configuration. Is there a way to do it like backing up Brocade switch configuration? CAM is under Solaris 10.
Thank you in advance! (0 Replies)
Hi,
I have a question about Sun StorageTek Common Array Manager (CAM): What is the concept of 'host'? Is it the hostname of the server that has access to the managed array? If so, can I use its IP instead of its hostname?
I've found a 'host' under CAM called XYZ (See below). In our... (7 Replies)
Bought a Sun StorageTek 2540 SAN array a few years ago from a company that was going out of business. When we first set it up, we were able to get all the software (Common Array Manager) and firmware directly from Sun.
We just upgraded the drives, but the array is too large for the firmware. Now... (6 Replies)
hi everone
i am experiencing disconnectivity from storage to My database machines. i have doubt on my FC cards in my sparc T4-2 machines. i want to know how should i check from my solaris that whether the cards are ok or not because once the disks get disconnect from SAN so it come back again but... (5 Replies)
Discussion started by: janakors
5 Replies
LEARN ABOUT XFREE86
sysdef
sysdef(1M) System Administration Commands sysdef(1M)NAME
sysdef - output system definition
SYNOPSIS
/usr/sbin/sysdef [-i] [-n namelist]
/usr/sbin/sysdef [-h] [-d] [-i] [-D]
DESCRIPTION
The sysdef utility outputs the current system definition in tabular form. It lists all hardware devices, as well as pseudo devices, system
devices, loadable modules, and the values of selected kernel tunable parameters.
It generates the output by analyzing the named bootable operating system file (namelist) and extracting the configuration information from
it.
The default system namelist is /dev/kmem.
OPTIONS -i Prints the configuration information from /dev/kmem. This is the default and only needs to be specified if the configura-
tion information from both /dev/kmem and the system file specified with the "-n namelist" option is needed.
-nnamelist Specifies a namelist other than the default (/dev/kmem). The namelist specified must be a valid bootable operating system.
-h Prints the identifier of the current host in hexadecimal. This numeric value is unique across all Sun hosts.
-d The output includes the configuration of system peripherals formatted as a device tree.
-D For each system peripheral in the device tree, display the name of the device driver used to manage the peripheral.
EXAMPLES
Example 1: Sample output format
The following example displays the format of the sysdef -d output:
example% sysdef -d
Node 'SUNW,Ultra-5_10', unit #-1
Node 'packages', unit #-1 (no driver)
Node 'terminal-emulator', unit #-1 (no driver)
Node 'deblocker', unit #-1 (no driver)
Node 'obp-tftp', unit #-1 (no driver)
Node 'disk-label', unit #-1 (no driver)
Node 'SUNW,builtin-drivers', unit #-1 (no driver)
Node 'sun-keyboard', unit #-1 (no driver)
Node 'ufs-file-system', unit #-1 (no driver)
Node 'chosen', unit #-1 (no driver)
Node 'openprom', unit #-1 (no driver)
Node 'client-services', unit #-1 (no driver)
Node 'options', unit #0
Node 'aliases', unit #-1 (no driver)
Node 'memory', unit #-1 (no driver)
Node 'virtual-memory', unit #-1 (no driver)
Node 'pci', unit #0
Node 'pci', unit #0
Node 'ebus', unit #0
Node 'auxio', unit #-1 (no driver)
Node 'power', unit #0
Node 'SUNW,pll', unit #-1 (no driver)
Node 'se', unit #0 (no driver)
Node 'su', unit #0
Node 'su', unit #1
Node 'ecpp', unit #-1 (no driver)
Node 'fdthree', unit #0
Node 'eeprom', unit #-1 (no driver)
Node 'flashprom', unit #-1 (no driver)
Node 'SUNW,CS4231', unit #0 (no driver)
Node 'network', unit #0
Node 'SUNW,m64B', unit #0
Node 'ide', unit #0
Node 'disk', unit #-1 (no driver)
Node 'cdrom', unit #-1 (no driver)
Node 'sd', unit #1
Node 'dad', unit #1
Node 'pci', unit #-1 (no driver)
Node 'SUNW,UltraSPARC-IIi', unit #-1 (no driver)
Node 'pseudo', unit #0
[output truncated]
FILES
/dev/kmem default operating system image
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO hostid(1), prtconf(1M), nlist(3ELF), attributes(5)SunOS 5.10 4 Oct 2004 sysdef(1M)
09-30-2008
