I cannot give a Debian-specific answer. The main problem is that modern Linux distributions do something like the following in /etc/fstab:
The "Label" stuff is what's giving you the problem. What happens is that every partition gets a filesystem-specific "tag" such as "BOOT" or "ROOT". The mount process finds the "first" partition that matches this tag.
To fix this, hard-code the device IDs. So in the /etc directory on the / mountpoint on your SECOND drive, do something like this:
But you're not done yet. If your boot-loader is "grub", you also have to go into the SECONDARY Boot partition and change the grub configuration there to make sure if tries to load the kernel and "initrd" image off /dev/hdb* instead of "BOOT" or "ROOT", etc.
You're still not done. In the grub configuration on the PRIMARY drive, in the Boot partition, you have to install a "chain loader" into the Grub configuration. Google for "Grub" and "chain loader".
Hi there!
I received the following error message
The hard disk at channel 2, target 1 had a soft error.
The output of a system check reveiled the following (see entry <2,1> ):
SWXCR xcr0 error counters:
RAID Array 200 Controller Family Information Utility V1.03... (1 Reply)
Hello agian !
What is the difference between SCSI and IDE hard disks ?
I have Intel PC and when i check i have Generic IDE TYPE DISK0
is IDE hard disk is ok for Solrais ? or should i buy the SCSI hard disk ?
Thanks
Abid Malik (3 Replies)
Hi,
I'm getting the errors below in the errpt report for a IBM Blade server. I'm guessing there's a problem with one of the disks but don't know how I can confirm this. Can anyone offer any suggestions?
Regards
Gareth (4 Replies)
hi guys,
i am new to this DNS business and i'm having a problem.
the setup is bind 9.2.3 is installed on a sun solaris 8 server and is the primary DNS. men and mice suite is installed on another sun solaris 8 and that is our secondary DNS server.
problem is recently the secondary DNS stopped... (0 Replies)
Hi experts,
i have added a new disk to my ultra 10 system, after that i am unable to boot the system, its not booting from disk neither from cd.
please help!
Regards (16 Replies)
Hello,
I wanted to share an experience I had today which was quite a learning experience and perhaps useful for others who may run into the issue at some point in the future.
Basically, the scenario involves a OS which was installed on a machine which hardware-wise, had a SATA Drive. The... (0 Replies)
Hi there! I am installing Unixware 7.1 to a new server. We usually use SCSI hard for this but since this will be used only for testing, I decided to use an 80GB IDE hard disk. I was able to successfully load the unix but found out that the 80GB hard disk was not maximized. The total hard disk... (1 Reply)
Hi
New here so forgive my ignorance and inability to express myself in an informative manner ;)
I have a Fedora distribution installed on my development computer. The system we build is meant to run on a slackware dist which is all fine and well. But due to our flow of deployment I would have... (2 Replies)
hi
I've a fresh installation of SCO 5.0.7 on the IDE hard disk.
For SCSI hard disk I can declare, for example blc disk driver using:
# mkdev hd 0 SCSI-0 0 blc 0but it works for IDE hard disk? (3 Replies)
hi there,
i using salaris 10 as my DNS server.
i have 2 dns server primary and secondary. if primary dns server i edit/update, the other secondary dns server must be sync too.
How can i configure if dns server (primary) can sync the secondary? (1 Reply)