One way of getting the information you want is to modify ../src/igb_ethtool.c to add the following lines to return the Interrupt Throttle Rates via the ethtool -S --statistics option (or create your own option just to return the relevant value). Add the following to the end of the statistics structure (igb_gstrings_stats[]), compile and reinstall the igb driver.
I only have an e1000e driver installed at present so cannot test this change for an igb driver but it worked for my e1000e driver. Here is the relevant output from ethtool -S eth0
Hope this helps you.
Hi Everyone!
How can we make a socket() system call from a linux module executing in kernel space?
If any one knows, kindly tell me. It will be great.
I want to use the socket interface in linux kernel space for sending raw packets over the network.
Hamayun (0 Replies)
Hi All,
Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff.
Cheers,
Brendan (4 Replies)
Hi all,
I am working on USB data monitoring on Fedora Core 9. Kernel 2.6.25 has a built-in module (the one that isn't loadable, but compiles and links statically with the kernel during compilation) to snoop USB data. It is in <kernel_source_code>/drivers/usb/mon/.
I need to know if I can... (0 Replies)
Hi,
if I install a module with specific parameter, will this parameters applied next time system boots?
for exampe, I want to disable InterruptThrottleRate
modprobe e1000e InterruptThrottleRate=0
Is this parameter apllied only for this run, or this module will always use this parameter when... (2 Replies)
how to display pid and other parameters of current process in linux platform ?
i know it can be done through a linux commmand ps -F
but i want it done through kernel program
thanks in advance (1 Reply)
cannot generate .ko file on my linux, although it can generate module.symvers.
But when I copy .c file and Makefile to another linux computer, there's no problem.
The strange thing is: make is successfuly executed, and returned 0;
make output:
make -C /lib/modules/2.6.18-92.el5xen/build ... (4 Replies)
Hi,
I need to set qlogic qla2xxx parameters in /etc/modprobe.conf
(Oracle Linux Server release 5.7, almost equal to RedHat 5.7)
two questions:
how can I pass this parameters to the module while it is loaded (fibre channel luns are in use), if possible at all
and how can I check the... (3 Replies)
please tell me the list of kernel parameters in RHEL 5.7
Because we've a requirement in one project.
Also tell me the importance of eah kernel parameter if possible.
==Thanks in Advance==:):D (1 Reply)
Hi everyone,
I am trying to prevent the ehci_hcd kernel module to load at boot time.
Here's what I've tried so far:
1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here):
2) Blacklisted the module by adding the following string to
3) Tried to blacklist the module... (0 Replies)