09-23-2008
Yes, but from the first error message you did not know which device AIX considers being busy. Now you know that it was not the rmt0 device. Run cfgmgr to get rmt0 back and then identify any device in the device tree of rmt0. Use
# lsdev -l <device> -F parent
for any device beginning from rmt0 till you end up at the slot and try to rmdev any device manually to identify the device which AIX considers being busy.
Secondly check that in the lpar's profile the slot is defined as optional (not required) to be fit for DLPARing. You need to stop and activate the LPAR to change this.
6 More Discussions You Might Find Interesting
1. AIX
Hi all,
I'm attempting to remove some EMC hdisk devices which we recently had made available to one of our backup servers. This is an AIX 5.3 server. When I try doing an rmdev I get the following:
root@********:/dev# rmdev -d -l hdisk495
Method error (/usr/lib/methods/ucfgdevice):
... (2 Replies)
Discussion started by: C.J.Hund
2 Replies
2. UNIX for Dummies Questions & Answers
Hi Everyone,
I am trying to remove a directory:
$ rm -rf directory_name/
rm: cannot remove `directory_name/filename': Device or resource busy
What does this mean, and why can't I remove these files? I already tried moving into the directory, and removing the files individually, but I... (7 Replies)
Discussion started by: Anna_Z
7 Replies
3. AIX
Hi All,
I'm having trouble with my SAN devices on AIX 5.3 so I would like to remove the SAN devices and HBAs. Then I want to recreate them with cfgmgr and see if this solves my problem.
So I have the following SAN devices:
# lsdev | grep fcs
fcs0 Available 07-08 FC... (7 Replies)
Discussion started by: petervg
7 Replies
4. Red Hat
Hi All,
Could anyone please help to resolve the below problem.
I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error.
I spent 2 days for the above and go through with several suggestion found by googling. But no luck.
... (0 Replies)
Discussion started by: Tanmoy
0 Replies
5. AIX
Gpfs how to remove nsd from a device
Need to removed nsd from the device below
/apps/abinitio/outbound01 90 30 DEVappsabob01
root@carlvpc0lpr24 # df -g /apps/abinitio/outbound01
Filesystem GB blocks Free %Used Iused %Iused Mounted on
/dev/DEVappsabob01 90.00 89.39 1% 4032 1%... (1 Reply)
Discussion started by: asyed123
1 Replies
6. HP-UX
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Discussion started by: anuragr
4 Replies
st(1M) st(1M)
NAME
st - shared tape administration
SYNOPSIS
device_file
DESCRIPTION
The command provides users with a command-line interface to check the status of a shared tape device or to reclaim a shared tape device
from a host system that has failed while holding a reservation on the shared tape device. The command can also be used for the same pur-
pose on shared library robotic devices. To use the command you must have root user id.
Please see examples below for usage.
Options
recognizes the following options and arguments:
Specifies the tape device file or sctl/esctl pass-through device
file for the shared tape/library device. This parameter is mandatory and will report an error if device_file is omitted.
Allows the user to reclaim a shared tape device or shared
library robotic device in the case where a host failed while holding a reservation on the shared device. This option causes
a bus device reset to be issued to the device specified by the option.
Prints out the current status of the shared tape/library
device specified by the option.
RETURN VALUE
returns 0 upon successful completion and 1 otherwise.
EXAMPLES
The following shows three examples of output from the above command.
The above output indicates that the shared device is reserved by another host and is therefore unavailable at this time.
The above output indicates that the shared device is not ready for use at this time.
The above output indicates that the shared device is ready for use at this time.
To reclaim a shared tape/library device from a failed host, the following command can be used:
WARNINGS
The option must be used with care. When reclaiming devices, it must be ensured that the host from which the device is being reclaimed has
in fact failed, as data may be lost as the result of reclaiming a device that is currently in use by another host.
AUTHOR
was developed by Hewlett-Packard.
SEE ALSO
mt(1), scsi(7), scsi_ctl(7).
st(1M)