Hi,
When I pinged a machin, I got to be seen a different kind of
reply from that machine.
This is as below : "Reply from 136.128.11.116: Source quench received." Which I felt like an un-usual message.
So what does this mean.
Regards & Thanks in advance.
Vishwa. (4 Replies)
Hi there hope list can help
I'm looking for a command that does the following
lets say i ping a server 00.00.000.00
and this server is up and running how do i get the ping command to return a UP or a Down
meaning
if the command is true do this
if the command is False do this
... (2 Replies)
We can ping out but the return never comes back even to localhost
ping localhost
PING loopback: (127.0.0.1): 56 data bytes
64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=0 ms
it just sits there....
any ideas, any files to check (1 Reply)
Hi ,
I have one system installed on Linux Red Hat 3.0. I have ip of system 3.156.168.*** and i want to ping some port that is on this IP which command i can do this?
sam70 (1 Reply)
Hi All,
Need your help one more time.
I am trying to ping a linux machine which is not responding to ping.
However traceroute can reach the machine and I can log in to it by ssh. I have checked /proc/sys/net/ipv4/icmp_echo_ignore_all it is already set as "0".
It is not happening in the... (1 Reply)
I have an old MP-Ras Unix system. I have setup netowkring but am unable to ping any local network pcs or the default gateway. If i use the arp -a command I receive the correct mac address for all connected pcs but I cannot ping anything except the local address. Any help would be appreciative.
... (7 Replies)
Hi,
I develop simple animation ping script on Solaris Platform. It is like Cisco ping.
Examples and source code are below.
bash-3.00$ gokcell 152.155.180.8 30
Sending 30 Ping Packets to 152.155.180.8
!!!!!!!!!!!!!.!!!!!!!!!!!!!!!.
% 93.33 success... % 6.66 packet loss...... (1 Reply)
I am unable to ping my remote server.My server is unable to ping the same. both are able to ping the gateway. both the ip's are on same network.i use a proxy tunnel on my remote server.Help if any clues. (6 Replies)
Hi
I am using perl to ping a list of nodes - with script below :
$p = Net::Ping->new("icmp");
if ($p->ping($host,1)){
print "$host is alive.\n";
}
else {
print "$host is unreacheable.\n";
}
$p->close();... (4 Replies)
help with bash script!
im am working on this script to make sure my server will stay online, so i made this script..
HOSTS="192.168.138.155"
COUNT=4
pingtest(){
for myhost in "$@"
do
ping -c "$COUNT" "$myhost" &&return 1
done
return 0
}
if pingtest $HOSTS
#100% failed... (4 Replies)
Discussion started by: mort3924
4 Replies
LEARN ABOUT DEBIAN
rlm_ippool_tool
RLM_IPPOOL_TOOL(8) System Manager's Manual RLM_IPPOOL_TOOL(8)NAME
rlm_ippool_tool - dump the contents of the FreeRadius ippool database files
SYNOPSIS
If an ipaddress is specified then that address is used to limit the actions or output.
rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]
Mark the entry nasIP/nasPort as having ipaddress
rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort
Update old format database to new.
rlm_ippool_tool -u session-db new-session-db
DESCRIPTION
rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.
Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.
OPTIONS -a Print all active entries.
-c Report number of active entries.
-r Remove active entries.
-v Verbose report of all entries.
-o Assume old database format (nas/port pair, not md5 output).
-n Mark the entry nasIP/nasPort as having ipaddress.
-u Update old format database to new.
EXAMPLES
Given the syntax in the FreeRadius radiusd.conf:
ippool myippool {
range-start = 192.168.1.0
range-stop = 192.168.1.255
[...]
session-db = ${raddbdir}/ip-pool.db
ip-index = ${raddbdir}/ip-index.db
}
To see the number of active entries in this pool, use:
$ rlm_ippool_tool -c ip-pool.db ip-index.db
13
To see all active entries in this pool, use:
$ rlm_ippool_tool -a ip-pool.db ip-index.db
192.168.1.5
192.168.1.82
192.168.1.244
192.168.1.57
192.168.1.120
192.168.1.27
[...]
To see all information about the active entries in the use, use:
$ rlm_ippool_tool -av ip-pool.db ip-index.db
NAS:172.16.1.1 port:0x2e8 - ipaddr:192.168.1.5 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x17c - ipaddr:192.168.1.82 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x106 - ipaddr:192.168.1.244 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x157 - ipaddr:192.168.1.57 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x2d8 - ipaddr:192.168.1.120 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x162 - ipaddr:192.168.1.27 active:1 cli:0 num:1
[...]
To see only information of one entry, use:
$ rlm_ippool_tool -v ip-pool.db ip-index.db 192.168.1.1
NAS:172.16.1.1 port:0x90 - ipaddr:192.168.1.1 active:0 cli:0 num:0
To add an IP address usage entry, use:
$ rlm_ippool_tool -n ip-pool.db ip-index.db 192.168.1.1 172.16.1.1 0x90
rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
rlm_ippool_tool: num: 1
rlm_ippool_tool: Allocated ip 192.168.1.1 to client on nas 172.16.1.1,port 144
SEE ALSO radiusd(8)AUTHORS
Currently part of the FreeRADIUS Project (http://www.freeradius.org) Originally by Edwin Groothuis, edwin@mavetju.org
(http://www.mavetju.org)
Mailing list details are at http://www.freeradius.org/
RLM_IPPOOL_TOOL(8)