qlc(7D) 																   qlc(7D)

NAME

       qlc - ISP2200, ISP2300, and SP212 Family Fibre Channel host bus adapter driver.

SYNOPSIS

       SUNW,qlc

       The qlc host bus adapter driver is a Sun Fibre Channel transport  layer-compliant  nexus driver for the Qlogic ISP2200, ISP2200A,  ISP2310,
       ISP2312, and SP212 adapters. These adapters support  Fibre Channel SCSI and  IP Protocols, FC-AL public loop profile, point-to-point   fab-
       ric connection and Fibre  Channel service classes two and three (see NOTES section below).

       The  qlc driver interfaces with the Sun Fibre Channel transport	layer to support the standard functions provided by the SCSA interface. It
       supports auto request sense and tagged  queueing by default. The driver requires that all devices have unique  hard  addresses  in  private
       loop configurations. Devices with conflicting hard addresses are not accessible.

       /kernel/drv/qlc

	   32-bit ELF kernel module ()

       /kernel/drv/amd64/qlc

	   64-bit ELF kernel module ()

       /kernel/drv/sparcv9/qlc

	   64-bit ELF kernel module (SPARC)

       /kernel/drv/qlc.conf

	    Driver configuration file

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Architecture		     |SPARC,			   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWqlc			   |
       +-----------------------------+-----------------------------+

       prtconf(1M), driver.conf(4), fcp(7D), fp(7D)

       Writing Device Drivers

       ANSI X3.230:1994, Fibre Channel Physical Signaling (FC-PH)

       Project 1134-D, Fibre Channel Generic Services (FC-GS-2)

       ANSI X3.269-1996, Fibre Channel Arbitrated Loop (FC-AL)

       ANSI X3.270-1996, Fibre Channel Protocol for  SCSI (FCP-SCSI)

       ANSI X3.270-1996, SCSI-3 Architecture Model (SAM)

       Fibre Channel Private Loop SCSI Direct  Attach  (FC-PLDA)

       Fabric Loop Attachment (FC-FLA)

       ISP2200 Firmware Interface Specification, QLogic Corporation

       ISP2300 Series Firmware Specification, QLogic Corporation

NOTES

	SP-212-based  host bus adapters (including QLA-210) are supported on x86 platforms only and are limited to a maximum of 8  targets in fab-
       ric and sixteen targets in local loop topology. FL topology is not supported with the SP-212-based host bus adapter.

								   21 Feb 20054 							   qlc(7D)