How is this printer connected to your system? Directly? Or is it a network printer? I presume you will need to specify the -v to specify how it is connected.
I misled you earlier when I said -l... the following syntax should work (note no .gz)
-E enables the printer. You can do that separately with /usr/lib/enable Samsung-ML-3051ND if it is currently disabled, which you can check with lpstat -p.
I've been researching minimizeing Solaris 8 and found that on the web page http://www.sun.com/bigadmin/content/packagelist/s8u7PkgList/p2.html the package SUNWglmr
is listed as "rasctrl environment monitoring driver for i2c, (Root) (32-bit)" while in the document "Solaris 8 minimize-updt1.pdf"... (1 Reply)
Just got an HP OfficeJet L7680 printer but there are no drivers for it in RHEL5. I just want to add the single driver without installing hplip 3.9.8. It's going to be connected with USB. Is this possible and if so how? (1 Reply)
Hello
I have a Minolta QMS Magicolor 3100 printer. A driver is available (Minolta-magicolor_3100-Postscript.ppd) for Linux, installed using foomatic, but it does not work properly. The resolution is at it's lowest and a poor quality grainy print results. The printer works fine under Windows XP... (0 Replies)
I have a RHEL 4 (probably not important, but whatever) machine with a few dozen network printers set up in CUPS. I would like to replicate this on a second machine.
With lpinfo I'm able to get the queue name and device information (socket://ipaddress or whatnot), but I haven't get figured out... (0 Replies)
Help, suspect hacked via serial or electric! any ideas on error "Pid:1, comm:swapper Tainted:G W 2.6.35-22 generic #33 -unbutu device = "(null)" or unknown-blocklist(8.1) please append a correct "root"boot option Available partitions 0b00 1048575 sr0 driver:sr 0800 488386584 sda driver:sd. Thanks... (3 Replies)
Hello,
Please help me if you could to resolve the problem with NVIDIA driver.
I have Lenovo T61p. I installed RHAT6 Open Client and then downloaded and installed NVIDIA driver version 270.41.06.
The product is Quadro FX 570. My laptop display type is LVDS. After installation everything works... (1 Reply)
I am trying to print from Debian and receive the following message: "Unable to open device file"/dev/lp0": Permission Denied"
The permissions for lp0 are 666.
Advice and comments, please.
:wall:
Thanks (0 Replies)
Hello All
I am working on Red Hat Enterprise Linux Server release 5.1 when I logged on to the shell and then write echo $SHELL it shows me the result /bin/bash
and when I write csh, the prompt changes and I feel that I am now working upon C shell but when I do echo $SHELL it shows me the... (9 Replies)
Discussion started by: adisky123
9 Replies
LEARN ABOUT MOJAVE
disable
enable(1) User Commands enable(1)NAME
enable, disable - enable/disable LP printers
SYNOPSIS
/usr/bin/enable printer...
/usr/bin/disable [-c | -W] [ -r [reason]] printer...
DESCRIPTION
The enable command activates printers, enabling them to print requests submitted by the lp command. enable must be run on the printer
server.
The disable command deactivates printers, disabling them from printing requests submitted by the lp command. By default, any requests that
are currently printing on printer will be reprinted in their entirety either on printer or another member of the same class of printers.
The disable command must be run on the print server.
Use lpstat -p to check the status of printers.
enable and disable only effect queueing on the print server's spooling system. Executing these commands from a client system will have no
effect on the server.
OPTIONS
The following options are supported for use with disable:
-c Cancels any requests that are currently printing on printer. This option cannot be used with the -W option. If the printer
is remote, the -c option will be silently ignored.
-W Waits until the request currently being printed is finished before disabling printer. This option cannot be used with the
-c option. If the printer is remote, the -W option will be silently ignored.
-r [reason] Assigns a reason for the disabling of the printer(s). This reason applies to all printers specified. This reason is
reported by lpstat -p. Enclose reason in quotes if it contains blanks. The default reason is "unknown reason" for the
existing printer, and "new printer" for a printer added to the system but not yet enabled.
OPERANDS
The following operand is supported for both enable and disable:
printer The name of the printer to be enabled or disabled. Specify printer using atomic name. See printers.conf(4) for information
regarding the naming conventions for atomic names.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
non-zero An error occurred.
FILES
/var/spool/lp/* LP print queue.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWpcu |
+-----------------------------+-----------------------------+
|CSI |enabled |
+-----------------------------+-----------------------------+
SEE ALSO lp(1), lpstat(1), printers.conf(4), attributes(5)SunOS 5.10 9 Sep 1996 enable(1)