How is this printer connected to your system? Directly? Or is it a network printer? I presume you will need to specify the -v to specify how it is connected.
I misled you earlier when I said -l... the following syntax should work (note no .gz)
-E enables the printer. You can do that separately with /usr/lib/enable Samsung-ML-3051ND if it is currently disabled, which you can check with lpstat -p.
I've been researching minimizeing Solaris 8 and found that on the web page http://www.sun.com/bigadmin/content/packagelist/s8u7PkgList/p2.html the package SUNWglmr
is listed as "rasctrl environment monitoring driver for i2c, (Root) (32-bit)" while in the document "Solaris 8 minimize-updt1.pdf"... (1 Reply)
Just got an HP OfficeJet L7680 printer but there are no drivers for it in RHEL5. I just want to add the single driver without installing hplip 3.9.8. It's going to be connected with USB. Is this possible and if so how? (1 Reply)
Hello
I have a Minolta QMS Magicolor 3100 printer. A driver is available (Minolta-magicolor_3100-Postscript.ppd) for Linux, installed using foomatic, but it does not work properly. The resolution is at it's lowest and a poor quality grainy print results. The printer works fine under Windows XP... (0 Replies)
I have a RHEL 4 (probably not important, but whatever) machine with a few dozen network printers set up in CUPS. I would like to replicate this on a second machine.
With lpinfo I'm able to get the queue name and device information (socket://ipaddress or whatnot), but I haven't get figured out... (0 Replies)
Help, suspect hacked via serial or electric! any ideas on error "Pid:1, comm:swapper Tainted:G W 2.6.35-22 generic #33 -unbutu device = "(null)" or unknown-blocklist(8.1) please append a correct "root"boot option Available partitions 0b00 1048575 sr0 driver:sr 0800 488386584 sda driver:sd. Thanks... (3 Replies)
Hello,
Please help me if you could to resolve the problem with NVIDIA driver.
I have Lenovo T61p. I installed RHAT6 Open Client and then downloaded and installed NVIDIA driver version 270.41.06.
The product is Quadro FX 570. My laptop display type is LVDS. After installation everything works... (1 Reply)
I am trying to print from Debian and receive the following message: "Unable to open device file"/dev/lp0": Permission Denied"
The permissions for lp0 are 666.
Advice and comments, please.
:wall:
Thanks (0 Replies)
Hello All
I am working on Red Hat Enterprise Linux Server release 5.1 when I logged on to the shell and then write echo $SHELL it shows me the result /bin/bash
and when I write csh, the prompt changes and I feel that I am now working upon C shell but when I do echo $SHELL it shows me the... (9 Replies)
Discussion started by: adisky123
9 Replies
LEARN ABOUT MOJAVE
cupsaddsmb
cupsaddsmb(8) Apple Inc. cupsaddsmb(8)NAME
cupsaddsmb - export printers to samba for windows clients
SYNOPSIS
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] -a
cupsaddsmb [ -H samba-server ] [ -U samba-user[%samba-password] ] [ -h cups-server[:port] ] [ -v ] printer [ ... printer ]
DESCRIPTION
The cupsaddsmb program exports printers to the SAMBA software (version 2.2.0 or higher) for use with Windows clients. Depending on the
SAMBA configuration, you may need to provide a password to export the printers. This program requires the Windows printer driver files
described below.
SAMBA CONFIGURATION
cupsaddsmb uses the RPC-based printing support in SAMBA to provide printer drivers and PPD files to Windows client machines. In order to
use this functionality, you must first configure the SAMBA smb.conf(5) file to support printing through CUPS and provide a printer driver
download share, as follows:
[global]
load printers = yes
printing = cups
printcap name = cups
[printers]
comment = All Printers
path = /var/spool/samba
browseable = no
public = yes
guest ok = yes
writable = no
printable = yes
[print$]
comment = Printer Drivers
path = /etc/samba/drivers
browseable = yes
guest ok = no
read only = yes
write list = root
This configuration assumes a FHS-compliant installation of SAMBA; adjust the [printers] and [print$] share paths accordingly on your system
as needed.
MICROSOFT POSTSCRIPT DRIVERS FOR WINDOWS
The base driver for Windows 2000 and higher is the Microsoft PostScript driver, which is available on any system running Windows 2000 or
higher in the %WINDIR%SYSTEM32SPOOLDRIVERSW32X863 folder for 32-bit drivers and %WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for
64-bit drivers.
Copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory
exactly as named below:
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
Note: Unlike Windows, case is significant - make sure that you use the lowercase filenames shown above, otherwise cupsaddsmb will fail to
export the drivers.
OPTIONS
cupsaddsmb supports the following options:
-H samba-server
Specifies the SAMBA server which defaults to the CUPS server.
-U samba-user[%samba-password]
Specifies the SAMBA print admin username which defaults to your current username. If the username contains a percent (%) character,
then the text following the percent is treated as the SAMBA password to use.
-a Exports all known printers. Otherwise only the named printers are exported.
-h cups-server[:port]
Specifies a different CUPS server to use.
-v Specifies that verbose information should be shown. This is useful for debugging SAMBA configuration problems.
SEE ALSO rpcclient(1), smbclient(1), smbd(8), smb.conf(5), CUPS Online Help (http://localhost:631/help)
COPYRIGHT
Copyright (C) 2007-2017 by Apple Inc.
11 June 2014 CUPS cupsaddsmb(8)