Hi all,

I am trying to setup SUN trunking per the instructions in the SUN Trunking 1.3 Installation and User's Guide. Dated June - 2007.

I am setting it up in a test environment. Pretty simple test bed. 2 Sun V490s connected to a Catalyst 6500 via fiber NICs. 2 NIC's in each 490. Each is a Gigaswift (ce) type NIC.

Patch levels on the boxes are as follows.

SunOS server01 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V490
SunOS server02 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V490

In the Guide it states, " Sun Trunking 1.3 ... provides the ability to aggregate multiple links so that they work in parallel as if they were a single link."

That is what I want to do. So... following along in the guide....

I have checked that both required packages are present.

server01/>#pkginfo -l SUNWtrku
PKGINST: SUNWtrku
NAME: Sun Trunking Utility 1.3 for Solaris 10
CATEGORY: application
ARCH: sparc
VERSION: 1.3,REV=2005.06.14.5.10
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Sun Trunking PCI/SBus Adapter Utility
PSTAMP: miro20050614090857
INSTDATE: Feb 27 2008 15:56
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 25 installed pathnames
11 shared pathnames
16 directories
5 executables
572 blocks used (approx)

server01/>#pkginfo -l SUNWtrkm
PKGINST: SUNWtrkm
NAME: Sun Trunking Utiltiy 1.3 Man Pages
CATEGORY: system
ARCH: all
VERSION: 1.3,REV=2005.06.14.10.0
BASEDIR: /opt
VENDOR: Sun Microsystems, Inc.
DESC: Sun Trunking PCI/SBus Adapter man pages
PSTAMP: miro20050614090918
INSTDATE: Feb 27 2008 15:56
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 12 installed pathnames
8 directories
44 blocks used (approx)

server01/>#

I found my instance numbers....

server01/>#grep net /etc/path_to_inst
"/pci@8,700000/network@4" 0 "ce"
"/pci@8,700000/network@5" 3 "ce"
"/pci@9,700000/network@2" 1 "ce"
"/pci@9,600000/network@1" 2 "ce"
server01/>#

OR

server01/>#dladm show-dev
ce0 link: unknown speed: 1000 Mbps duplex: full
ce3 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 1000 Mbps duplex: full
ce2 link: unknown speed: 1000 Mbps duplex: full
server01/>#

I'm going to use ce0 and ce3 for the trunk.

Added the following line the the nettr.sh script

nettr -setup 944 device=ce members=0,3 policy=1 lacp=p ptimer=1

I created the appropriate hostname file in /etc/

/etc/hostname.ce0

As I said, the switch that these 2 boxes are connected to is a Cisco Catalyst 6500. Config is as follows....

SW-Cat6506-A> (enable) sh port lacp-channel info
Switch Frame Distribution Method: ip both

Port Status Channel Admin Channel Speed Duplex Vlan
mode group id
----- ---------- -------------------- ----- ------- ----- ------ ----
4/6 connected active 944 1764 1000 full 150
4/8 connected active 944 1764 1000 full 150

Port Channel Oper-group Neighbor Oper-Distribution PortSecurity/
ifIndex Oper-group Method Dynamic port
----- ------- ---------- ---------- ----------------- -------------
4/6 177 15105 945 ip both
4/8 177 15105 945 ip both

Port Device-ID Port-ID Platform
----- ------------------------------- ------------------------- ----------------
4/6 00-13-bc-31-b9-fa 51203
4/8 00-13-bc-31-b9-fa 51200


So everything appears to be setup per the instructions in the guide, however, when I boot the box and it tries to establish the aggregate link, I see the following error message.

NOTICE: trunk link (ce3): Partner Key=0: Please configure a valid key value on switch.

NOTICE: trunk link (ce0): Partner Key=0: Please configure a valid key value on switch.

NOTICE: trunk link (ce3): Partner Key=0: Please configure a valid key value on switch.

NOTICE: trunk link (ce0): Partner Key=0: Please configure a valid key value on switch.

NOTICE: trunk link (ce3): Port Partner MAC (0:7:d:72:1e:0) or key (15106) incompatible with Aggregation Partner MAC (0:7:d:72:1e:0) or key (15105)

My question is, why is it saying my Partner Key=0 when I see in the switch config that it is 944. What am I missing? I did confirm that the MAC address (0:7:d:72:1e:0) is in fact, the MAC address of the switch port where this box is plugged in. Not sure where the other keys 15105 and 15105 are coming from.

Any help on this would GREATLY be appreciated.
Thanks
Bruhn