How I do to check disk not use in my server.
Sun Solaris 2.8
df -k
du |sort -rn
But I want check disk and analyse a file system not used.
Thanks for reply. (1 Reply)
I wrote a script that checks particular device path directory which is full or more than 90% used, and will search older file inside and delete it. My code looks like this:
#!/usr/bin/ksh
ref=90
df -k | grep /cbmdata/00/gdd | tr -d '%' | \
while read a b c d e other
do
if (( $e >= $ref... (4 Replies)
Hi,
I first wanted to install my NIC drivers but it said:
Makefile:62: *** Linux kernel source not found. Stop.
So I installed the kernel source: linux-source-2.6.18_2.6.18.dfsg.1-13etch5_all.deb
1) cd /usr/src
2) -xjvf linux-source.2.6.18.extension (forget what it was)
3) ln -s... (12 Replies)
Hi All,
pls go thru the below code and help me.
when i check "df -k" in my solaris system .. it will show like below..
fd 0 0 0 0% /dev/fd
/dev/dsk/c0t0d0s3 20171281 2319266 17650303 12% /var
/dev/dsk/c0t0d0s4 10085260 443854... (15 Replies)
Hi, guys
I am a super newbie in solaris admin....
Now I got a problem.
Due to the broken of one of Raid system, some user home directory is missing.
Someone advises me to relocate the home directory on the new drive.
I have googled and have tried " usermode -d " command.
But I found a... (3 Replies)
Dear All,
Required a script which will check the PING response from my source file(tmp/PingStatus.txt) containing the hostnames.
If ping response is not responding(i.e when hostname is not alive) then this cmd to be executed :
opcmsg object=PING a=OS msg_grp=win-ping severity=critical... (20 Replies)
Hi,
How to check disk io mount pointwise? I am working as Oracle DBA and want to check disk io as per mount point for adding new datafiles in tablesapce or change my redolog files to lowest disk I/O mount point. My all mount points are like /data1, /data2, /data3 ,,,,,. Can somebody tell me how... (1 Reply)
I have installed Solaris 11 Express on my machine. I have made a script which would take snapshots of all the rpool filesystems every day and send them to a (local) hard drive. There is a zpool on that drive called backup.
Now in case of a system failure, I will act according to a manual on the... (1 Reply)
Hi
I am new on your forum, because I need some help.
I have a server with debian and proxmox 2.
The HardDisk is broken.
I am in rescue mode, and I can't mount LVM partition to recover my backups.
What I've already done :
# fdisk -l
Disk /dev/sda: 2000.4 GB, 2000398934016 bytes
255... (0 Replies)
Hi,
I have a Sun Fire V440 server that fails to boot up correctly. A lot of services are not started and the sytems acts really slow to commands. During boot I can see the following Error:
WARNING: /pci@1f,700000/scsi@2/sd@0,0 (sd1):
SCSI transport failed: reason 'reset': retrying... (15 Replies)
Discussion started by: oliwei
15 Replies
LEARN ABOUT OSF1
volreattach
volreattach(8) System Manager's Manual volreattach(8)NAME
volreattach - Reattaches disk drives that have once again become accessible
SYNOPSIS
/usr/sbin/volreattach [-rb] [accessname...]
/usr/sbin/volreattach -c accessname
OPTIONS
The volreattach utility has the following options: Calls the volrecover utility to attempt to recover stale plexes of any volumes on the
failed disk. Performs the reattach operation in the background. Checks whether a reattach is possible. No operation is performed, but the
name of the disk group and disk media name at which the disk can be reattached is displayed.
DESCRIPTION
The volreattach utility attempts to reattach disks using the same disk group and media names they had before detachment.
This operation may be necessary if a disk has a transient failure, or if some disk drivers are unloaded or unloadable when the Logical
Storage Manager is started, causing disks to enter the failed state.
If the problem is fixed, the volreattach command can be used to reattach the disks without plexes being flagged as stale, as long as the
reattach happens before any volumes on the disk are started.
The volreattach command is called from the voldiskadm menus as part of disk recovery.
The volreattach utility tries to find a disk with a disk group and disk ID matching that of the disk(s) being reattached. If the matching
disk is found, the reattach operation may still fail if the original cause (or some other cause) for the disk failure still exists.
EXIT CODES
A zero exit status is returned if it is possible to perform a reattach. Otherwise, non-zero is returned.
SEE ALSO volintro(8), voldiskadm(8), volrecover(8)volreattach(8)