Reading a tape from a StorEdge Autoloader L8. Post: 302227550

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

error reading from tape

Hi all, I am attempting to read tar images from a DLT tape, and have recieved an error, which i don't know: tar: blocksize = 8 tar: directory checksum error I have been able to read from other tapes, using the same command (tar -tvf /devicename) but this time i have an...

2. UNIX for Dummies Questions & Answers

reading from tape error

I have been attempting to read a DLT tape, but encountered problems. I have applied patches from SUN that 'resolve' known problems with tape reading etc...but still the error! Techsupport reckon that the data/tape is corrupt. I would like to think they aren't. Are there any issues with...

3. UNIX for Advanced & Expert Users

Autoloader working

Hi Exprts, I've some question regrading to work with Tape Autoloaders. i like to know that for making backup we could use "Tar" commands & any commands that we use for writing on ordinary Tape drives. Thanks, Nikk

4. AIX

reading contents on a 4mm tape

I am experimenting with one of my TSM processes, and I am trying to write something to a 4mm tape. I tried to use the tctl command, but, I was unsuccessful. what AiX command can I run in order to see if my output is on the tape ? Thank You !

5. AIX

Problem reading a 4mm tape drive

I'm attempting to read a tape in a 4mm drive (AIX 4.3) using the following command... tar tvf /dev/rmt0 ...and I keep getting the following error message: tar: 0511-193 An error occurred while reading from the media. There is not enough memory available now. I've googled this error...

6. Solaris

Using Enterprise 4500 with storedge D100 and storedge A5200

Sorry if this seems trivial. i have been given a task at work to configure a sun processing server "enterprise 4500" so it can work with the a storage server "storedge A5200" and "storedge D1000" the truth is i have never worked on a sun server before. i need a guideline (step by step) as to...

7. UNIX for Advanced & Expert Users

Reading from a corrupted tape

I've got a backuptape in cpio format that was accidentally overwritten with a very small batch file. As I assume that the cpio header has been overwritten, I cannot extract files from the backup in the conventional manner: ( cpio -itv </dev/rct0 cpio: this is not a cpio file, bad header) ...

8. UNIX for Dummies Questions & Answers

Reading label from tape

Hi, I have a HP SURESTORE 40 tape drive. Several archives are stored on it using DUMP. I have several volumes stored on the tape... If I issue restore -rf /dev/st0 will it restore just the arhcive that the tape reader is currently on or will it restore all of them? Thanks,

9. Red Hat

reading an AIX cpio tape on RH8

Thanks for any insights you might have... I have a RH8 system setup with a DAT drive. I have a AIX tape that was made using cpio. Bottom line is I need to read the AIX tape into the RH box. I was able to do cpio -itv --no-absolute-filenames < /dev/st0 and read the table of contents. ...

10. UNIX for Advanced & Expert Users

Help with ZFS backup on remote autoloader

I have a cluster of 2 V490s, one is connected to tape. I need a way to backup ZFS file systems from the non-tape machine to the tape machine. I tried : zfs send pool/snap@today | ssh host2 zfs recv pool2/snap@today | dd /dev/tape, to no avail. My question: 1- Is there a way to backup ZFS...

LEARN ABOUT XFREE86

rpm2cpio

rpm2cpio(1)							   User Commands						       rpm2cpio(1)

NAME
       rpm2cpio - convert Red Hat Package (RPM) to cpio archive

SYNOPSIS
       rpm2cpio [file.rpm]

DESCRIPTION
       The  rpm2cpio  utility converts the .rpm file specified as its sole argument to a cpio archive on standard output. (See NOTES.) If no argu-
       ment is given, an rpm stream is read from standard input. In both cases, rpm2cpio will fail and print a usage message if the standard  out-
       put is a terminal. Therefore, the output is usually redirected to a file or piped through the cpio(1) utility.

EXAMPLES
       Example 1: Converting an rpm file

       example% rpm2cpio Device3Dfx-1.1-2.src.rpm | cpio -itv
       CPIO archive found!
       -rw-r--r--   1 root  root    2635 Sep 13 16:39 1998, 3dfx.gif
       -rw-r--r--   1 root  root   11339 Sep 27 16:03 1998, Dev3Dfx.tar.gz
       -rw-r--r--   1 root  root    1387 Sep 27 16:04 1998, Device3Dfx-1.1-2.spec
       31 blocks

       Example 2: Converting from standard input

       example% rpm2cpio < Device3Dfx-1.1-2.src.rpm | cpio -itv
       CPIO archive found!
       -rw-r--r--   1 root  root    2635 Sep 13 16:39 1998, 3dfx.gif
       -rw-r--r--   1 root  root   11339 Sep 27 16:03 1998, Dev3Dfx.tar.gz
       -rw-r--r--   1 root  root    1387 Sep 27 16:04 1998, Device3Dfx-1.1-2.spec
       31 blocks

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWrpm			   |
       +-----------------------------+-----------------------------+

SEE ALSO
       cpio(1), attributes(5)

NOTES
       rpm2cpio handles versions 3 and 4 RPMs.

SunOS 5.10							    20 Aug 2001 						       rpm2cpio(1)