08-18-2008
replacing root disk SunFire 280R
Hi,
We had a disk go bad in this SunFire 280R, running Solaris 8 - Generic_117350-46. We replaced the disk and partitioned it. We metadetached all the metadevices but for some reason the new disk is showing up in the metadb as Concat/Stripe and it won't let us re-sync the mirror. We are not Sun DiskSuite experts here and need some help. Here is the full metastat:
sl76prd2# metastat d35
d35: Mirror
Submirror 0: d15
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8389656 blocks
d15: Submirror of d35
State: Okay
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s5 0 No Okay
sl76prd2# metastat
d30: Mirror
Submirror 0: d10
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 2941002 blocks
d10: Submirror of d30
State: Okay
Size: 2941002 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s0 0 No Okay
d31: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d21
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4194828 blocks
d11: Submirror of d31
State: Okay
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s1 0 No Okay
d21: Submirror of d31
State: Needs maintenance
Invoke: metareplace d31 c1t1d0s1 <new device>
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s1 0 No Maintenance
d33: Mirror
Submirror 0: d13
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8389656 blocks
d13: Submirror of d33
State: Okay
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s3 0 No Okay
d34: Mirror
Submirror 0: d14
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8389656 blocks
d14: Submirror of d34
State: Okay
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s4 0 No Okay
d35: Mirror
Submirror 0: d15
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 8389656 blocks
d15: Submirror of d35
State: Okay
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s5 0 No Okay
d37: Mirror
Submirror 0: d17
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 16779312 blocks
d17: Submirror of d37
State: Okay
Size: 16779312 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s7 0 No Okay
d23: Concat/Stripe
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase
c1t1d0s3 0 No
d24: Concat/Stripe
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase
c1t1d0s4 0 No
d25: Concat/Stripe
Size: 8389656 blocks
Stripe 0:
Device Start Block Dbase
c1t1d0s5 0 No
d27: Concat/Stripe
Size: 16779312 blocks
Stripe 0:
Device Start Block Dbase
c1t1d0s7 0 No
d38: Concat/Stripe
Size: 185006080 blocks
Stripe 0:
Device Start Block Dbase
c3t0d0s0 0 No
Stripe 1:
Device Start Block Dbase
c3t0d0s3 0 No
d39: Concat/Stripe
Size: 7340032 blocks
Stripe 0:
Device Start Block Dbase
c3t0d0s4 0 No
d41: Concat/Stripe
Size: 4200448 blocks
Stripe 0:
Device Start Block Dbase
c3t0d0s1 0 No
hsp001: is empty
Any help appreciated!
Thanks,
Mike
10 More Discussions You Might Find Interesting
1. Solaris
hi,
i hv received SUNfire 280R system ........for its initial configuration i want to connect to it through hyperterminal from the windows system..........i hv got one serial port to RJ-45 port converter with the system............can anybody tell me the normal console cable which is used to... (3 Replies)
Discussion started by: girish_shukla
3 Replies
2. Solaris
Hi!,
We have a SUN Server 280R (2 *36GB) disks. The disk with the root filesystem needs to be replaced! Lots of H/W error messages!
We have the new disk - but how do we go about re-building it!
Is there any document or location where I can get detailed re-build instructions?
Any help... (7 Replies)
Discussion started by: sdharmap
7 Replies
3. Solaris
hi!!!!!!
how to upgrade sunfire 280R server from solaris8 to solaris9?
pls help me.
Thanks & Regards
-Vishal (1 Reply)
Discussion started by: Vishal Shroff
1 Replies
4. Solaris
Greetings all,
I'm in a bit of a situation. I have this Sunfire 280R system that did not have a floppy drive in it, yet we needed one. We grabbed one from another Sun box we had laying around unused, and installed it. The system couldnt recognize it. Tried another floppy drive (non-sun) and... (4 Replies)
Discussion started by: snackiesmores
4 Replies
5. Solaris
Hi there
Does anybody know what the biggest capacity disk I can get into a Sunfire 280R
I currently have two 73gb disks , but I need to get these up to the biggest available
Any help would be greatly appreciated (4 Replies)
Discussion started by: hcclnoodles
4 Replies
6. Solaris
Hi,
I have to question:
1) when O/S is booting, i see messages:
/dev/rdsk/c1t0d0s5: is logging
/dev/rdsk/c1t0d0s3: is logging
/dev/rdsk/c1t0d0s7: is logging
i partitioned these slices during installation of O/S 5.9. I can access to these mountpoint no problem. But... (3 Replies)
Discussion started by: lamoul
3 Replies
7. Solaris
Hi,
i just finished installing solaris 5.9 and I'm looking for the tools to tell me if i should update the patches or how to make sure that the current patches are ok?
thanks (2 Replies)
Discussion started by: lamoul
2 Replies
8. Solaris
Hi,
I' trying to install O/S 5.9 on Sparc system Sunfire 280R. I downloaded CD install and CD 2 from Sun Website but later i dowloaded CD 2 that i forgot for my installation. All CD are in ISO formats.
I boot system at OK prompt then issue
OK boot cdrom
when it asks for CD 1, i removed... (7 Replies)
Discussion started by: lamoul
7 Replies
9. Hardware
Hi,
I'm a newbie in the Unix world... :confused:
I own a Sun Sunfire 280R computer with one 750Mhz CPU. I ordered two CPU of 900Mhz to replace it; however in the Service manual from Sun I read that to use 900Mhz CPU i will need to have a OBP of at least version 4.5.16. When I type .version in... (2 Replies)
Discussion started by: Monkey114
2 Replies
10. Hardware
I got the system couple of days back from one of my friend. Last night I turned it on and I noticed that maintenance LED is on. At the same time I added an LCD monitor via VGA and nothing was showing on the screen. Though the system does not have any HDD So not sure if system will even show a BIOS... (3 Replies)
Discussion started by: pgirish007
3 Replies