08-17-2008
yes (i saw the date of the posting, but that was my own actual problem), that's nearly all, first should the service-Processor of the blade been updated (web-based), then the image-File is not an ISO-Image but have to be burned with a file-system as single file on a second cd, vt320-Emulation works fine and F7 should start in the submenu the procedure, after that the blade should be configured/reseted webbased.
8 More Discussions You Might Find Interesting
1. Solaris
Hi guys,
I am a new member here. This is my first post.
I try to purchase some new Blade 2500 for the
company. However, the vendor suggests me to get Blade 2000 instead. The vendor said he has many problems
with new Silver Blade 2500's. Has anyone here had
simlar experience with blade 2500?... (4 Replies)
Discussion started by: facaizhu
4 Replies
2. Solaris
I have a SUN Blade 1000 running Solaris 10 and an A1000 array.
I know that this combo is not supported by SUN but will it work?
The raid manager software is installed and it says that the firmware needs to be upgraded -it is at I think level 2.05 something.
I can see all the disks in a... (13 Replies)
Discussion started by: tribbles
13 Replies
3. HP-UX
Hi gurus,
I was more on the Sun side and now am getting exposure to the HP-UX side of the world. I have to upgrade firmware on BL870c blade.
Can some one point to a url or give procedure to follow as I couldn't find much on the web.
Thanks
Momin (1 Reply)
Discussion started by: momin
1 Replies
4. Hardware
Hi,
I have got a slot within my C3000 blade enclosure populated with a HP SB40c (StorageWorks). This is essentially a disk array for the blades to access within my C3000 enclosure.
I can see from my OA that it is currently powered off. Can anybody suggest what is required in order to get... (0 Replies)
Discussion started by: Duffs22
0 Replies
5. UNIX for Dummies Questions & Answers
Hi,
I have server SUN BLADE T6340 and i tried install debian sparc on this machine.
Will it work ?
In the specification is written only Solaris 10. (4 Replies)
Discussion started by: PtaQ
4 Replies
6. UNIX Benchmarks
CPU/Speed: UltraSPARC-IIIi/1.5Ghz
Ram: 1GB
Motherboard: Sparc
Bus: PCI
Cache:
Controller:
Disk: ATA
Load: 1 user
Kernel: SunOS 5.10 Generic_137111-02
Kernel ELF?: yes
pgms: gcc 2.95.3 compiled
BYTE UNIX Benchmarks (Version 3.11)
System -- SunOS aachen95 5.10... (0 Replies)
Discussion started by: MadeInGermany
0 Replies
7. AIX
How to access IBM server free of charge ?
Is there such services provided by IBM ?
I want to practice on AIX & learn about administration before go to exam soon
Do you have idea what VLP ( Virtual Loaner Program ) is ? (4 Replies)
Discussion started by: arm
4 Replies
8. Red Hat
HI,
How do we figure out if the server is half blade server or full blade server?
Anything we need to look at to know on this?
thanks in advance (9 Replies)
Discussion started by: snchaudhari2
9 Replies
IPWFW(4) BSD Kernel Interfaces Manual IPWFW(4)
NAME
ipwfw -- Firmware Module for Intel PRO/Wireless 2100 driver
SYNOPSIS
To compile this module into the kernel, place the following line in your kernel configuration file:
device ipwfw
This will include three firmware images inside the kernel. If you want to pick only the firmware image for the mode you want to operate your
network adapter in choose one of the following:
device ipwbssfw
device ipwibssfw
device ipwmonitorfw
Alternatively, to load the driver as a module at boot time, place the following lines in loader.conf(5):
ipw_bss_load="YES"
ipw_ibss_load="YES"
ipw_monitor_load="YES"
DESCRIPTION
This module provides access to firmware sets for the Intel PRO/Wireless 2100 series of IEEE 802.11 adapters. It may be statically linked
into the kernel, or loaded as a module.
For the loaded firmware to be enabled for use the license at /usr/share/doc/legal/intel_ipw/LICENSE must be agreed to by adding the following
line to loader.conf(5):
legal.intel_ipw.license_ack=1
FILES
/usr/share/doc/legal/intel_ipw/LICENSE ipwfw firmware license
SEE ALSO
ipw(4), firmware(9)
BSD
January 14, 2010 BSD