08-15-2008
I am using
OpenVPN for more or less the same purpose.
10 More Discussions You Might Find Interesting
1. IP Networking
Hi
I know this problem is more likely some windows problem but it has also something to do with unix.
We have a windows nt environment wich uses AIX (unix) machines as file servers (samba). In our windows network environment we nicely see al the unix file servers via the 10 MB network. Last... (2 Replies)
Discussion started by: Mark Detrez
2 Replies
2. IP Networking
following Problem.
I configured my SuSE Linux 8.0 as a router. I4l, named, ip_forward, iptables (NAT/MASQUERADING) are running or are aktivatet.
I just can get a internet connection about the proxy server squid, but if i want to use other protocols i need functional routing.
(I had this... (1 Reply)
Discussion started by: razor
1 Replies
3. IP Networking
I have a question concerning networking. Could any forum
members explain to me why I might be getting "no route
to host" messages when I try to connect through ftp and
http protocols?
I have went to my etc/hosts file and everything seems to be
configured properly. I can connect within my... (1 Reply)
Discussion started by: cstovall
1 Replies
4. IP Networking
hi,
below is the situation:
my server is in 128.10.200.xxx network.
i have a solaris computer running in a subnet. this computer got 2 nic card.
1 is 172.18.198.xxx , another 1 is 10.100.xxx.11
there is a machine stick with this computer, ip is 10.100.xxx.12
so, 10.100.xxx.11 and... (3 Replies)
Discussion started by: kyhah
3 Replies
5. Solaris
Hi,
I got problem of Sun Solaris 8 routing.
IP of SunA is 10.16.64.164, and have routing table:
10.16.64.0 10.16.64.164 U 1 19236 bge1
10.6.0.0 10.6.0.3 U 1 16534 bge0
224.0.0.0 10.6.0.3 U 1 ... (4 Replies)
Discussion started by: milo
4 Replies
6. Red Hat
hi,
having an issue on a class C network with trying to get a redhat diskless setup going. I am using oracle enterprise 5, which is RHEL 5.3 i believe.
here is the scenario:
sun sparc m4k that i am planning on making the red hat boxes boot off after i get the network issue fixed.
... (3 Replies)
Discussion started by: caddyjoe77
3 Replies
7. AIX
I need the following solution , please help me...
Current situation
ip: 192.168.0.12 persistent and 192.168.254.12 service ip
gateway: 192.168.0.254
subnet: 255.255.255.0
i have added a new ip on a new nic
ip: 10.10.255.40
gateway: 10.10.255.62
subnet: 255.255.255.224
... (1 Reply)
Discussion started by: rajibimran
1 Replies
8. IP Networking
hi guys!
I was searching few days for a solution to my problem but haven't found one or I'm too dumb to understand.
Here's what happened:
I have a linux server used as a router. It has an eth0 and eth1 (local interface). I just installed openvpn (I need it only as a client), I configured it and... (0 Replies)
Discussion started by: shamora
0 Replies
9. IP Networking
Internet Gateway
192.168.0.201
Server 1
192.168.0.101
192.168.1.101
192.168.2.101
gateway: 192.168.0.201
VIP: 192.168.1.100
VIP: 192.168.2.100
Server 2
192.168.0.102
192.168.1.102
192.168.2.102
gateway: 192.168.0.201
Client 1
192.168.2.201
gateway: 192.168.2.100 (1 Reply)
Discussion started by: hopfensp
1 Replies
10. Solaris
Hi,
I have two physical interfaces on a servers.
We have connected them to differerent subnets.
1) First interface:
10.158.49.87 to newtwork 10.158.49.0, its gateway is 10.158.49.1
(It is added as default gateway)
It is existing set up. It works well
2) Second interface:
... (1 Reply)
Discussion started by: sri243
1 Replies
LEARN ABOUT DEBIAN
ifscheme
IFSCHEME(8) Commands IFSCHEME(8)
NAME
ifscheme - scheme control for network interfaces
SYNOPSIS
ifscheme [-v] [[-s] newscheme]
mapping <interface> script ifscheme-mapping
DESCRIPTION
ifscheme allows you to change network configuraton schemes or query the current scheme. It integrates with the ifup(8) command and inter-
faces(5). For example, you might use this program to configure a "home" scheme and a "work" scheme for a network device on a laptop. When
you move between home and work, a simple command can reconfigure your networking.
If you run the program with no parameters, it will tell what the current network scheme is.
The ifscheme-mapping utility is used to tell the ifup and ifdown utilities about the current scheme.
OPTIONS
-v
--verbose
Run in verbose mode. This is passed in to the ifup and ifdown programs as well.
-l
--list list all schemes available/defined in /etc/network/interfaces.
newscheme
-s newscheme
--scheme newscheme
Change to a new network configuration scheme. When the scheme is changed, network interfaces that were using the old scheme will be
taken down and brought back up to use the new configuration scheme. -s or --scheme are mandatory if newscheme begins with a -.
CONFIGURATION
To make the program do anything useful when a scheme is selected, you must edit /etc/network/interfaces to add a mapping for the interface
(or interfaces) that can be controlled on a per-scheme basis. Suppose you want to control eth0 in this way. You might have an existing eth0
configuraton in there, such as:
auto eth0
iface eth0 inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
To change this so you can chose between static routing and dhcp, replace it with the following (it helps to ifdown the interface first).
auto eth0
mapping eth0
script ifscheme-mapping
iface eth0-home inet static
address 192.168.1.5
netmask 255.255.255.0
gateway 192.168.1.1
iface eth0-work inet dhcp
Now if you run "ifscheme home" and ifup the interface, you'll get the eth0-home configuration stanza. If you run "ifscheme work", it will
be changed to the eth0-work stanza. You can add additional stanzas as desired, but the label must always be of the form <hardware inter-
face>-<scheme name>.
If you have a second interface (perhaps a wireless network card on eth1), you can duplicate the above for that interface, changing the eth0
and the configuration details as appropriate, but remember to add an iface stanza for every scheme name for the second interface.
FILES
/etc/network/interfaces
the interfaces definition file
/etc/network/run/scheme
the current scheme
/etc/network/run/ifstate
a record of the current state of the interfaces, managed by ifup and ifdown
BUGS
All schemed interfaces will have the same scheme.
Any schemed interface which does not have an entry for the current scheme and is not configured when the scheme is changed will not be suc-
cessfully configured when it is brought up.
SEE ALSO
interfaces(5) ifup(8) ifdown(8)
DISTRIBUTION
Redistribution is subject to the GNU public license.
AUTHORS
Joey Hess <joey@kitenet.net>, Peter Wilson <pwilson@cs.hmc.edu>
IFSCHEME(8)