Sponsored Content
Special Forums IP Networking To find switch port of machine running under VMware Post 302224099 by Tlogine on Tuesday 12th of August 2008 08:12:50 AM
Old 08-12-2008
To find switch port of machine running under VMware

I would like to find a switch port( of a VLAN of CISCO switch) of a machine which is acutally running under VMware.

Now I only know about IP & MAC address of a machine which running under VMware
and I do not know about the real machine where VMware is installed.

Is there any possibility?
 

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

how to find out if a port is available on a remote machine?

hi, I can ping into another unix machine, but I cannot seem to access a certain application. I think it might be because I am now allowed to connect to the port (because of firewall configuration). How can I find out if I have access to a port on another machine? thanks (2 Replies)
Discussion started by: JamesByars
2 Replies

2. UNIX for Advanced & Expert Users

check remote switch port speed setting

Hi, Someone told me how to check the remote switch port's speed setting on the other end of the cable, from linux. I forgot it. Anyone knows? I checked dmesg, ethtool (haven't checked this out thoroughly) , no luck. thanks, Marc (1 Reply)
Discussion started by: marcpascual
1 Replies

3. AIX

Switch Port Becoming Private & restricting access

Hello folks, I have an AIX server that is connected to a storage array via a Brocade switch using 4 ports from either side. The zoning is done such that there are 4 paths visible from the server to the storage. My work involves frequent disabling or enabling the switch ports that are... (1 Reply)
Discussion started by: nkiran
1 Replies

4. UNIX for Advanced & Expert Users

How to Switch off a Unix machine abruptly

Hi Folks, My UNIX machine is placed geographically in another location. I have a remote access towards it. I want to abruptly switch off my unix machine through remote connection. Is it possible through any UNIX commands? I practically want to power off a PC , something like unplugging a power... (12 Replies)
Discussion started by: gjasper
12 Replies

5. Virtualization and Cloud Computing

solaris virtual machine vmware esx

Hi All How would you send a solaris virtual machine in vmware esx, a break signal? :confused: (0 Replies)
Discussion started by: jakerock
0 Replies

6. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies

7. Linux

Connect from USB to serial port of switch

I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
Discussion started by: rbatte1
7 Replies

8. UNIX for Beginners Questions & Answers

How to check everything are migrated after the physical to vmware virtual machine?

I have a physical machine , just use vmware tools migrated data to virtual machine . how can I check these two servers - old and new server , the data are the same , all files are copy to new server ? thanks (2 Replies)
Discussion started by: ust3
2 Replies

9. UNIX for Beginners Questions & Answers

How to find whether Solaris installed on physical machine or on a VMware/KVM?

Hi All, . I am trying to find whether Solaris 11 installed on physical server or on VMware/KVM. I tried uname -a but it's giving only whether i installed on X86 or sparc machine. I tried prtdiag command but it's giving below information. command : prtdiag -v |grep "System... (2 Replies)
Discussion started by: sravani25
2 Replies
vmmouse_detect(1)					      General Commands Manual						 vmmouse_detect(1)

NAME
vmmouse_detect - VMware mouse device autodetection tool SYNOPSIS
vmmouse_detect OPTIONS
vmmouse_detect has no options DESCRIPTION
vmmouse_detect is a tool for detecting if running in a VMware environment where vmmouse is used. It exits with a 0 return value if the vmmouse client is enabled, and 1 if not. DIAGNOSTICS
vmmouse_detect's exit status is used to communicate information. 0 vmmouse_detect found a mouse and exited normally. 1 Either the vmmouse client was not enabled, or it is not being run from within a VMware virtual machine. BUGS
Please report bugs in vmmouse_detect <https://bugs.launchpad.net/ubuntu/+source/mdetect/vmmouse_detect>. AUTHORS
vmmouse_detect is copyright 2007 VMware, Inc. LICENSING
The vmmouse_detect source code is licensed under a BSD-like license. See COPYING for details. This manual page is licensed under the GNU General Public License. SEE ALSO
mdetect(1), XFree86(1) X Version 11 xf86-input-vmmouse 13.0.0 vmmouse_detect(1)
All times are GMT -4. The time now is 01:36 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy