Netapp filer LUN Resize. Commands to run on Solaris afterwards. Post: 302222776

9 More Discussions You Might Find Interesting

1. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need...

2. Solaris

Can't see Netapp LUN on Solaris using LPFC after reboot.

Hi, I've just edited this post. I found the solution for this. Thanks.

3. AIX

Dynamic LUN resize

Anyone know how to resize a LUN (if SAN disk array has increased the LUN size) and have AIX LVM know about it? Or is it automatic? Equivalent vxvm command is something like: vxdisk resize size=

4. AIX

Resize Lun

Good afternoon! Help with a solution I have AIX 7.1 works through vios I expanded Lun that it is necessary to make that aix saw this change and to expand the section lvm Sorry for my English

5. AIX

Netapp iscsi lun

Hi, I have aix 6.1 box. I want to configure iscsi luns from netapp storage. I tried in google but not getting proper solution for that. i m not getting the proper iqn name. Please share me the steps to complete this requirements. Thanks in advance.

6. Red Hat

How to resize filesystem by resizing the LUN without impact to applications.?

Is it possible to resize a filesystem by resizing the LUN on RHEL 6.4 64-bit with LVM and no impact to running applications? The research I have done so far seems to take the approach of adding a new LUN and then expaning the volume group to the new LUN. I'm looking for an approach that avoids a...

7. Solaris

Netapp filer details - command?

What command can I use to find out details about a netapp filer. I have a directory that is a filer i would like to know details about the source host/folder that it points to. Thanks.

8. Solaris

Restore of Netapp FC lun targets used as the disks for a zpool with exported zfs file systems

So, We have a Netapp storage solution. We have Sparc T4-4s running with LDOMS and client zones in the LDOMS, We are using FC for storage comms. So here's the basic setup FC luns are exported to the primary on the Sparc box. using LDM they are then exported to the LDOM using vdisk. at the...

9. Linux

Identify newly attached LUN from NetApp

Hi I need to identify a newly attached LUN from NetApp on a linuxserver running uname -o GNU/Linux I have first run the df -h and got the following: df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_outsystemdb-lv_root 50G 2.7G 45G ...

LEARN ABOUT CENTOS

fsadm

FSADM(8)																  FSADM(8)

NAME

       fsadm - utility to resize or check filesystem on a device

SYNOPSIS

       fsadm [options] check device

       fsadm [options] resize device [new_size[BKMGTEP]]

DESCRIPTION

       fsadm  utility  checks or resizes the filesystem on a device.  It tries to use the same API for ext2, ext3, ext4, ReiserFS and XFS filesys-
       tem.

OPTIONS

       -e, --ext-offline
	      Unmount ext2/ext3/ext4 filesystem before doing resize.

       -f, --force
	      Bypass some sanity checks.

       -h, --help
	      Display the help text.

       -n, --dry-run
	      Print commands without running them.

       -v, --verbose
	      Be more verbose.

       -y, --yes
	      Answer "yes" at any prompts.

       new_size
	      Absolute number of filesystem blocks to be in the filesystem, or an absolute size using a suffix (in powers of 1024).   If  new_size
	      is not supplied, the whole device is used.

DIAGNOSTICS

       On  successful completion, the status code is 0.  A status code of 2 indicates the operation was interrupted by the user.  A status code of
       3 indicates the requested check operation could not be performed because the filesystem is mounted and does not support an online  fsck(8).
       A status code of 1 is used for other failures.

EXAMPLES

       Resize  the  filesystem	on  logical  volume /dev/vg/test to 1000 megabytes.  If /dev/vg/test contains ext2/ext3/ext4 filesystem it will be
       unmounted prior the resize.  All [y|n] questions will be answered 'y'.

       fsadm -e -y resize /dev/vg/test 1000M

ENVIRONMENT VARIABLES

       TMPDIR The temporary directory name for mount points. Defaults to "/tmp".

       DM_DEV_DIR
	      The device directory name.  Defaults to "/dev" and must be an absolute path.

SEE ALSO

       lvm(8), lvresize(8), lvm.conf(5), fsck(8),  tune2fs(8),	resize2fs(8),  reiserfstune(8),  resize_reiserfs(8),  xfs_info(8),  xfs_growfs(8),
       xfs_check(8)

Red Hat, Inc					     LVM TOOLS 2.02.105(2)-RHEL7 (2014-03-26)						  FSADM(8)