07-25-2008
Quote:
Originally Posted by
incredible
And also, I don't want to go through re-creating the RAID cos Im afraid it will destroy the data on my disks which are in sync now. So I will need a perfect answer. If not will be screwed up by my user
I actually wanted to carry out the upgrade on the actual x2100 system. Since the user cant get a downtime, he wanted me to make sure it worked on the non-live system. If installation is all OK,he suggested that we just move the disks over the the Live system. But I dont think he's sure of his expectation, while im afraid down here
The swapping of the disks not done yet. Noone is giving an answer to this and its very uncertain.Moreover , the user called up this morning and informed that the raid is not showing optimal and is still in sync state, which shoudn't be the case, cause I did the H/W RAID yesterday morning. even 500G, by now should be done, correct? Im lost.
he did a raidctl -l c1t0d0 and noticed the "sync" state
Dear Admins/Moderators/Experts, need your assistance. Thanks!
9 More Discussions You Might Find Interesting
1. Linux
Hi everyone.
I have a machine which upon to recently only had one hard disk. Now I have another one identical in size and speed and want create a raid set from those two.
The partition layout is that I have three partitions, first one for /boot, the second for / and then a huge LVM partition... (1 Reply)
Discussion started by: Sprellarinn
1 Replies
2. Solaris
Hi all
i would like to ask some suggests about my next job!
I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid.
The problem come in if every disk is now controlled by the HBA, how can I install the OS?
No disk is being detected by the OS.
SAS card... (2 Replies)
Discussion started by: kakabobo
2 Replies
3. UNIX for Dummies Questions & Answers
Hi
Can someone tell me what are the differences between software and hardware raid ?
thx for help. (2 Replies)
Discussion started by: presul
2 Replies
4. Solaris
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Discussion started by: jegaraman
2 Replies
5. Solaris
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Discussion started by: Solarister
1 Replies
6. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
7. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
8. Red Hat
Im have Oracle Virtualbox and vmware workstation How can i Add2 HDD in Vmware or Virtualbox and Install centos Using Raid Configuration Please give me Tutorial step by Step .. Thanks in Advance
In Virtualbox there is SAS Hard disk So shall i Use it ? (3 Replies)
Discussion started by: babinlonston
3 Replies
9. Red Hat
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
reboot(2) System Calls Manual reboot(2)
NAME
reboot - Reboots system or halts processor
SYNOPSIS
#include <sys/reboot.h>
void reboot( int howto );
PARAMETERS
Specifies a mask of options.
DESCRIPTION
The reboot() function restarts the system. The startup is automatic and brings up /vmunix in the normal, nonmaintenance mode. The calling
process must have superuser privilege to run this function successfully. However, a reboot is invoked automatically in the event of unre-
coverable system failures.
The following options, defined in the sys/reboot.h include file are passed to the new kernel or the new bootstrap and init programs. They
are supplied as values to the howto parameter. The default, causing the system to reboot in its usual fashion. Dump kernel memory before
rebooting; see the savecore command for more information. The processor is simply halted; no reboot takes place. The disks are not sync'd
before the processor is halted or rebooted. Normally, the disks are sync'd (see the sync() command) before the processor is halted or
rebooted. Because the disks are not sync'd with the RB_NOSYNC option, loss of data may result from using it.
When no options are given (that is, RB_AUTOBOOT is used), the system is rebooted from file vmunix in the root file system of unit 0 (zero)
of a disk chosen in a processor-specific way. (see the fsck command).
RETURN VALUES
If successful, this call does not return. Otherwise, a -1 is returned and errno is set to indicate the error.
ERRORS
If the reboot() function fails, errno may be set to the following value: The calling process does not have appropriate privilege.
RELATED INFORMATION
Commands: crashdc(8),
halt(8), init(8), reboot(8), savecore(8) delim off
reboot(2)