07-23-2008
Brother, I came across this doc from SUN which said like this:
To configure RAID for the Solaris Operating System if you have the LSI Logic SAS3041E-R card installed, follow the procedure below:
1. Install the optional LSI Logic SAS3041E-R card (Sun part number
SG-PCIE4SAS-Z).
See the Sun Fire X2100 M2 Server Service Manual for instructions on installing and cabling the card.
2. Power on the server.
3. During the boot process, press Ctrl-C to enter the LSI utility when the LSI SAS card is recognized.
4. Create your RAID.
See the LSI Integrated RAID User's Guide at
www.lsilogic.com - /files/docs/techdocs/storage_stand_prod/ PCISCSICont/Software/ir_ug.pdf
5. Save your work and exit the utility.
6. Install the Solaris Operating System.
See Operating System Installation Methods.
7. Download the LSI utilities for managing RAID from the following site:
LSISAS3041E-R : Basic Connectivity Line : SAS/SATA HBAs : Host Bus Adapters : Products : Storage : LSI
9 More Discussions You Might Find Interesting
1. Linux
Hi everyone.
I have a machine which upon to recently only had one hard disk. Now I have another one identical in size and speed and want create a raid set from those two.
The partition layout is that I have three partitions, first one for /boot, the second for / and then a huge LVM partition... (1 Reply)
Discussion started by: Sprellarinn
1 Replies
2. Solaris
Hi all
i would like to ask some suggests about my next job!
I have to install a new Sun Netra T5220, with an additional internal StorageTek SAS HBA Raid.
The problem come in if every disk is now controlled by the HBA, how can I install the OS?
No disk is being detected by the OS.
SAS card... (2 Replies)
Discussion started by: kakabobo
2 Replies
3. UNIX for Dummies Questions & Answers
Hi
Can someone tell me what are the differences between software and hardware raid ?
thx for help. (2 Replies)
Discussion started by: presul
2 Replies
4. Solaris
Dear ALl,
I have a RAID 5 volume which is as below
d120 r 60GB c1t2d0s5 c1t3d0s5 c1t4d0s5 c1t5d0s5
d7 r 99GB c1t2d0s0 c1t3d0s0 c1t4d0s0 c1t5d0s0
d110 r 99GB c1t2d0s4 c1t3d0s4 c1t4d0s4 c1t5d0s4
d8 r 99GB c1t2d0s1 c1t3d0s1... (2 Replies)
Discussion started by: jegaraman
2 Replies
5. Solaris
Hello All,
I have read enough of texts on Raid 01 and Raid 10 on solaris :wall: . But no-where found a way to create them using SVM. Some one pls tell me how to do or Post some link if that helps.
TIA
Curious
solarister (1 Reply)
Discussion started by: Solarister
1 Replies
6. AIX
Hello,
I have a scsi pci x raid controller card on which I had created a disk array of 3 disks
when I type lspv ; I used to see 3 physical disks ( two local disks and one raid 5 disk )
suddenly the raid 5 disk array disappeared ; so the hardware engineer thought the problem was with SCSI... (0 Replies)
Discussion started by: filosophizer
0 Replies
7. Solaris
Server Model: T5120 with 146G x4 disks.
OS: Solaris 10 - installed on c1t0d0.
Plan to use software raid (veritas volume mgr) on c1t2d0 disk.
After format and label the disk, still not able to detect using vxdiskadm.
Question:
Should I remove the hardware raid on c1t2d0 first?
My... (4 Replies)
Discussion started by: KhawHL
4 Replies
8. Red Hat
Im have Oracle Virtualbox and vmware workstation How can i Add2 HDD in Vmware or Virtualbox and Install centos Using Raid Configuration Please give me Tutorial step by Step .. Thanks in Advance
In Virtualbox there is SAS Hard disk So shall i Use it ? (3 Replies)
Discussion started by: babinlonston
3 Replies
9. Red Hat
Hello,
I want to delete a RAID configuration an old server has.
Since i haven't the chance to work with the specific raid controller in the past can you please help me how to perform the configuraiton?
I downloaded IBM ServeRAID Support CD but i wasn't able to configure the video card so i... (0 Replies)
Discussion started by: @dagio
0 Replies
LEARN ABOUT OPENSOLARIS
mega_sas
mega_sas(7D) Devices mega_sas(7D)
NAME
mega_sas - SCSI HBA driver for LSI MegaRAID SAS controller
DESCRIPTION
The mega_sas MegaRAID controller host bus adapter driver is a SCSA-compliant nexus driver that supports the Dell PERC 5/E, 5/i, 6/E and
6/i RAID controllers, the IBM ServeRAID-MR10k SAS/SATA controller and the LSI MegaRAID SAS/SATA 8308ELP, 8344ELP, 84016E, 8408ELP,
8480ELP, 8704ELP, 8704EM2, 8708ELP, 8708EM2, 8880EM2 and 8888ELP series of controllers.
Supported RAID features include RAID levels 0, 1, 5, and 6, RAID spans 10, 50 and 60, online capacity expansion (OCE), online RAID level
migration (RLM), auto resume after loss of system power during arrays, array rebuild or reconstruction (RLM) and configurable stripe size
up to 1MB. Additional supported RAID features include check consistency for background data integrity, patrol read for media scanning and
repairing, 64 logical drive support, up to 64TB LUN support, automatic rebuild and global and dedicated hot spare support.
CONFIGURATION
The mega_sas.conf file contains no user configurable parameters. Please configure your hardware through the related BIOS utility or the
MegaCli configuration utility. If you want to install to a drive attached to a mega_sas HBA, you should create the virtual drive first
from the BIOS before running the Solaris install. You can obtain the MegaCli utility from the LSI website.
The mega_sas device can support up to 64 virtual disks. Note that BIOS numbers the virtual disks as 1 through 64, however in the Solaris
operating environment virtual disks are numbered from 0 to 63. Also note that SAS and SATA drives cannot be configured into the same vir-
tual disk.
KNOWN PROBLEMS AND LIMITATIONS
The mega_sas driver does not support the LSI MegaRAID SAS 8204ELP, 8204XLP, 8208ELP, and 8208XLP controllers.
FILES
/kernel/drv/mega_sas 32-bit ELF kernel module. (x86)
/kernel/drv/amd64/mega_sas 64-bit kernel module. (x86)
/kernel/drv/mega_sas.conf Driver configuration file (contains no user-configurable options).
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Architecture |x86-based systems |
+-----------------------------+-----------------------------+
|Availability |SUNWmegasas |
+-----------------------------+-----------------------------+
|Interface stability |Uncommitted |
+-----------------------------+-----------------------------+
SEE ALSO
prtconf(1M), attributes(5), sata(7D), scsi_hba_attach_setup(9F), scsi_sync_pkt(9F), scsi_transport(9F), scsi_inquiry(9S), scsi_device(9S),
scsi_pkt(9S)
Small Computer System Interface-2 (SCSI-2)
SunOS 5.11 14 Aug 2008 mega_sas(7D)