failing drive Post: 302216787

Sponsored Content

Operating Systems AIX failing drive Post 302216787 by bakunin on Monday 21st of July 2008 06:58:05 AM

07-21-2008

Registered User

How this is exactly done is depending on the RAID adapter (more precisely: the adapters driver software), so i can give you only general directions.

If the failing disk is part of a RAID you will probably not be able to manage the disk device itself. A RAID works like this: there are several disks connected to an adapter. The driver software of the adapter makes one big virtual disk out of the several physical ones and presents this virtual construct as a physical disk to the machine. (This is what is done during the "RAID initialization" or however it is called with your software. The driver/adapter writes some bookkeeping information onto the physical disk to be able to use them the described way.)

Only this virtual disk is added to a VG as a "Physical Volume" and from there on normal LVM procedures apply.

Your first task is to make the PV free from OS access. You can do this by either breaking the mirror (if the VG is mirrored) or by varying off the VG as zaxxon suggested. Since the "disk" in the VG is only a virtual construct there is no strict relationship between disks and logical volumes. All the logical volumes on the virtual RAID disk are "smudged across" the physical disks comprising the RAID.

After this you need to use the adapters driver software (in case of the IBM SCSI RAID adapter this is plugged into SMITty and the diag utility) to remove the disk from the RAID, after which the RAID is in status "reduced". then physically change the disks and add the new disk to the RAID. This will probably take some time as the new disk has to be written with the data first to be useful in the RAID. Only then varyon again and start using the VG again.

Do you need to backup? In principle you don't, because in a RAID all the disks hold all the information with redundancy. The classical case is 5 disks holding the capacity of 4 - for this penalty it is possible to replace every single disk without losing data, because the data it holds is also available on the other 4. This does NOT mean that a backup would be a bad idea: not at all! It is better to have a backup you don't need than to need a backup you don't have.

I hope this helps.

bakunin

bakunin

View Public Profile for bakunin

Find all posts by bakunin

8 More Discussions You Might Find Interesting

1. Filesystems, Disks and Memory

The best partitioning schem for a 250GB Sata hard drive & a 75GB SCSI hard drive

Hi I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /...

2. UNIX for Dummies Questions & Answers

Map Drive From Windows To Apache Shared Drive?

Anyone know how I can map a windows drive to an apache shared drive? In my httpd.conf file, I have: Alias /merc_rpts/ "/u/merc_rpts/" <Directory "/u/merc_rpts"> Options Indexes </Directory> I'm able to bring up a browser and see the contents of this folder. In...

3. SCO

mounting USB floppy drive /Flash drive in OSR 6.0

Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 .

4. Shell Programming and Scripting

ps -ef failing sometimes

Hi Everyone, we have a shell script "DLP_recv.sh" that has below command which is supposed to return the number of active instances of itself, which means of there is no other instance then commad would return 1 (for the current instance). The problem is that it sometimes it returns 0 which is...

5. Hardware

How to Clone a Drive with 512 byte Sectors to a Drive with 4096 bytes/sector (AF)?

I have a 320 GB drive which dual boots Windows and Debian: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal):...

6. HP-UX

DLT 7000 tape drive failing with "write error on a record in the index"

HP rp5450 (L2000) running HP-UX 11.11B Using DLT 7000 and DLT 4000 tape drives for nightly full backups Backup jobs created by SAM DLT 7000 cron entry is as follows: 00 2 * * 1-6 /usr/sam/lbin/br_backup DLT FULL Y /dev/rmt/0m /var/sam/graphLCAa17036 root Y 1 N > /var/sam/SAM_br_msgs 2>&1...

7. UNIX for Dummies Questions & Answers

Need help to move .csv file from UNIX path to windows shared drive or c:\ drive

Hi Guys, Can any one help me on this. I need help to move .csv/.xls file from unix path to windows shared drive or c:\ drive? Regards, LKR

8. Solaris

Drive is showing offline in the /var/adm/messages and shows "drive type unknown" in the format outpu

Hi, I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0): drive offline genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430 ...

LEARN ABOUT DEBIAN

gnome2::vfs::drive

Gnome2::VFS::Drive(3pm) 				User Contributed Perl Documentation				   Gnome2::VFS::Drive(3pm)

NAME

       Gnome2::VFS::Drive - Container around Gnome2::VFS::Volume

HIERARCHY

	 Glib::Object
	 +----Gnome2::VFS::Drive

METHODS

   string = $drive->get_activation_uri
   integer = $a->compare ($b)
       o   $b (Gnome2::VFS::Drive)

   string = $drive->get_device_path
   devicetype = $drive->get_device_type
   string = $drive->get_display_name
   $drive->eject ($func, $data=undef)
       o   $func (scalar)

       o   $data (scalar)

   string = $drive->get_hal_udi
       Since: vfs 2.8

   string = $drive->get_icon
   unsigned = $drive->get_id
   boolean = $drive->is_connected
   boolean = $drive->is_mounted
   boolean = $drive->is_user_visible
   $drive->mount ($func, $data=undef)
       o   $func (scalar)

       o   $data (scalar)

   list = $drive->get_mounted_volumes
       Since: vfs 2.8

   boolean = $drive->needs_eject
       Since: vfs 2.16

   $drive->unmount ($func, $data=undef)
       o   $func (scalar)

       o   $data (scalar)

SIGNALS

       volume-mounted (Gnome2::VFS::Drive, Gnome2::VFS::Volume)
       volume-pre-unmount (Gnome2::VFS::Drive, Gnome2::VFS::Volume)
       volume-unmounted (Gnome2::VFS::Drive, Gnome2::VFS::Volume)

ENUMS AND FLAGS

   enum Gnome2::VFS::DeviceType
       o   'unknown' / 'GNOME_VFS_DEVICE_TYPE_UNKNOWN'

       o   'audio-cd' / 'GNOME_VFS_DEVICE_TYPE_AUDIO_CD'

       o   'video-dvd' / 'GNOME_VFS_DEVICE_TYPE_VIDEO_DVD'

       o   'harddrive' / 'GNOME_VFS_DEVICE_TYPE_HARDDRIVE'

       o   'cdrom' / 'GNOME_VFS_DEVICE_TYPE_CDROM'

       o   'floppy' / 'GNOME_VFS_DEVICE_TYPE_FLOPPY'

       o   'zip' / 'GNOME_VFS_DEVICE_TYPE_ZIP'

       o   'jaz' / 'GNOME_VFS_DEVICE_TYPE_JAZ'

       o   'nfs' / 'GNOME_VFS_DEVICE_TYPE_NFS'

       o   'autofs' / 'GNOME_VFS_DEVICE_TYPE_AUTOFS'

       o   'camera' / 'GNOME_VFS_DEVICE_TYPE_CAMERA'

       o   'memory-stick' / 'GNOME_VFS_DEVICE_TYPE_MEMORY_STICK'

       o   'smb' / 'GNOME_VFS_DEVICE_TYPE_SMB'

       o   'apple' / 'GNOME_VFS_DEVICE_TYPE_APPLE'

       o   'music-player' / 'GNOME_VFS_DEVICE_TYPE_MUSIC_PLAYER'

       o   'windows' / 'GNOME_VFS_DEVICE_TYPE_WINDOWS'

       o   'loopback' / 'GNOME_VFS_DEVICE_TYPE_LOOPBACK'

       o   'network' / 'GNOME_VFS_DEVICE_TYPE_NETWORK'

SEE ALSO

       Gnome2::VFS, Glib::Object

COPYRIGHT

       Copyright (C) 2003-2007 by the gtk2-perl team.

       This software is licensed under the LGPL.  See Gnome2::VFS for a full notice.

perl v5.14.2							    2011-11-15						   Gnome2::VFS::Drive(3pm)