07-16-2008
If the software state is UNCLAIMED then there's no point in running `insf -e`
It is as good as driver not installed in the box.
Few questions to be answered by u?
1) Did u had similar FC card installed in this system earlier and was it in claimed state or is it the first time u are doing so?
2) Did u check with HP, whether this FC card PART NO. is actually valid for this system?
3) If 2) is YES i.e it is valid then when u installed driver did u allow for kernel reconfiguration and then reboot. What were the steps u carried out to install the driver. NOTE: The FC card should be installed first in BOX and then driver be installed. Never VICE VERSA.
10 More Discussions You Might Find Interesting
1. Programming
#include <stdio.h>
#include <sys/types.h>
#include <string.h>
#include <sys/stat.h>
#include <unistd.h>
struct stat s;
main() {
char c;
if (fork()==0) {
system("clear");
do {
printf("myAI\\>§ ");
scanf("%s",c);
if(stat(c,&s)>-1) {... (3 Replies)
Discussion started by: C|[anti-trust]
3 Replies
2. UNIX for Dummies Questions & Answers
telnet at my system is behaving stange. Some times I am able to telnet to other machines but sometimes it stop doing that. Then i have to reboot the machine and most of the time (not 100%) it works. SImilar is the case with SSH. Sometime it works , some time it don't. i am new to Unix and I do not... (1 Reply)
Discussion started by: deepak_pathania
1 Replies
3. HP-UX
Hi,
I do have three scripts. Whcih inserts records into a table using sqlldr, creating some reprot files etc. The first script will call the second and then the second will call the third. When I run my first script from the shell prompt, all my operation are completed successfully. If I do... (23 Replies)
Discussion started by: risshanth
23 Replies
4. Shell Programming and Scripting
Hi all,
I'm trying to generate a series of txt files starting from a plain csv file
part of my code:
#!/bin/ksh
INSTALLDIR=/Users/ME/Installdir
CSV=CSV.csv
TMP=/tmp/$(basename $0).txt
tr -s "\r" "\n" < /$INSTALLDIR/$CSV > $TMP
function Makefiles
{
printf '%24s:%30s\n' "sometext"... (1 Reply)
Discussion started by: Jive Spector
1 Replies
5. Shell Programming and Scripting
I am using mailx command in my script to attach a file and send an email. I need to attach a csv file and send email to a mail id -
I am using
uuencode output.csv output.csv | mailx -s "test mail" xyz@abc.com
This will send a mail with scrambled text in body.
am i missing something ?... (4 Replies)
Discussion started by: Sriranga
4 Replies
6. Red Hat
This is the first time for using sudo for me.
# visudo
## Allows people in group admin to run all commands
%admin ALL=(ALL) ALL
# groupadd admin
# useradd temp
# usermod -a -G admin temp
# id temp
uid=506(temp) gid=506(temp) groups=506(temp),507(admin)
#
#sudo... (5 Replies)
Discussion started by: getrue
5 Replies
7. Shell Programming and Scripting
Hello Everyone,
I'm very new to the shell script. I'm trying to send multiple attachments in unix using uuencode command.
Total I have 3 text files which should be send in mail.
but I'm getting 6 files and 3 files with subject as file name. And the content is
`
end
I'm working... (6 Replies)
Discussion started by: narikivar
6 Replies
8. Linux
Hi,
I am trying to enable rexec to automate certain tasks(it has to be rexec, not ssh or any other due to the system environment), so after switching to linux, I followed the certain instructions that were laid out in the web.
My operating system is fedora 17, so I first installed the... (1 Reply)
Discussion started by: wringer
1 Replies
9. UNIX for Dummies Questions & Answers
Hi There,
---------
file1
-------
~c asd@ac.com
--------------
Now i am using below command
cat file1|mailx -s " testing" -r " My Name" abc@tech.com (3 Replies)
Discussion started by: Tapan Sharma
3 Replies
10. Shell Programming and Scripting
Platform: RHEL 5.4
In the below text file I have strings like following.
$ cat /tmp/mytextfile.txt
DISK1
DISK10
DISK101
DISK102
DISK103
DISK104
DISK105
DISK106
DISK107
DISK108
DISK109
DISK110
DISK111
DISK112
DISK113
DISK114 (8 Replies)
Discussion started by: kraljic
8 Replies
DAIC(4) BSD Kernel Interfaces Manual DAIC(4)
NAME
daic -- isdn4bsd driver for EICON.Diehl active ISDN cards
SYNOPSIS
daic0 at isa? iomem 0xd8000 irq 10
DESCRIPTION
The daic driver supports the old Diehl active cards: S, SX, SXn, SCOM and QUADRO.
For a QUADRO card, the driver will detect the board type and use all four ports, each attached as a controller of its own to the isdn4bsd
system, which can be listed using the daicctl utility.
The daic driver interfaces the ISDN card to the ISDN4BSD kernel subsystem. All lower layer ISDN control is handled by the card. This should
allow you to run any national ISDN protocol delivered by EICON.Diehl for your card, but the driver has only been tested with the DSS1 proto-
col and some parts of the cards interface are ISDN protocol dependent.
The daic driver is written to conform to the software interface documented by Diehl in their ISDN-Karten Benutzerhandbuch from 1992.
MICROCODE DOWNLOAD
Every active card needs its own operating software before it can work. You have to download this to the card before using it with isdn4bsd.
Use the daicctl utility to do this, i.e. call daicctl -d te_etsi.sx 1 to download the file te_etsi.sx to controller number 1. Use daicctl -l
to list all available controllers (and ports). You have to select the correct ISDN protocol file for your ISDN interface, see the Diehl docu-
mentation for details.
The cards bootstrap process involves another file, which is independent of the card type you use and the protocol you run. It is called
download.bin in current versions of the Diehl software distribution and has to be copied to the kernel compile directory under
dev/microcode/daic and converted into a header file used when compiling the kernel by running make in that directory. Your kernel compile
will fail and remind you of this if you forget to do this. Due to copyright restrictions we cannot distribute the driver with this file inte-
grated. But if you own a card, you do have the file (or can get it from the Diehl web server).
SEE ALSO
daicctl(1)
BUGS
The driver is not yet finished.
BSD
January 30, 1998 BSD