07-16-2008
If the software state is UNCLAIMED then there's no point in running `insf -e`
It is as good as driver not installed in the box.
Few questions to be answered by u?
1) Did u had similar FC card installed in this system earlier and was it in claimed state or is it the first time u are doing so?
2) Did u check with HP, whether this FC card PART NO. is actually valid for this system?
3) If 2) is YES i.e it is valid then when u installed driver did u allow for kernel reconfiguration and then reboot. What were the steps u carried out to install the driver. NOTE: The FC card should be installed first in BOX and then driver be installed. Never VICE VERSA.
10 More Discussions You Might Find Interesting
1. Programming
#include <stdio.h>
#include <sys/types.h>
#include <string.h>
#include <sys/stat.h>
#include <unistd.h>
struct stat s;
main() {
char c;
if (fork()==0) {
system("clear");
do {
printf("myAI\\>§ ");
scanf("%s",c);
if(stat(c,&s)>-1) {... (3 Replies)
Discussion started by: C|[anti-trust]
3 Replies
2. UNIX for Dummies Questions & Answers
telnet at my system is behaving stange. Some times I am able to telnet to other machines but sometimes it stop doing that. Then i have to reboot the machine and most of the time (not 100%) it works. SImilar is the case with SSH. Sometime it works , some time it don't. i am new to Unix and I do not... (1 Reply)
Discussion started by: deepak_pathania
1 Replies
3. HP-UX
Hi,
I do have three scripts. Whcih inserts records into a table using sqlldr, creating some reprot files etc. The first script will call the second and then the second will call the third. When I run my first script from the shell prompt, all my operation are completed successfully. If I do... (23 Replies)
Discussion started by: risshanth
23 Replies
4. Shell Programming and Scripting
Hi all,
I'm trying to generate a series of txt files starting from a plain csv file
part of my code:
#!/bin/ksh
INSTALLDIR=/Users/ME/Installdir
CSV=CSV.csv
TMP=/tmp/$(basename $0).txt
tr -s "\r" "\n" < /$INSTALLDIR/$CSV > $TMP
function Makefiles
{
printf '%24s:%30s\n' "sometext"... (1 Reply)
Discussion started by: Jive Spector
1 Replies
5. Shell Programming and Scripting
I am using mailx command in my script to attach a file and send an email. I need to attach a csv file and send email to a mail id -
I am using
uuencode output.csv output.csv | mailx -s "test mail" xyz@abc.com
This will send a mail with scrambled text in body.
am i missing something ?... (4 Replies)
Discussion started by: Sriranga
4 Replies
6. Red Hat
This is the first time for using sudo for me.
# visudo
## Allows people in group admin to run all commands
%admin ALL=(ALL) ALL
# groupadd admin
# useradd temp
# usermod -a -G admin temp
# id temp
uid=506(temp) gid=506(temp) groups=506(temp),507(admin)
#
#sudo... (5 Replies)
Discussion started by: getrue
5 Replies
7. Shell Programming and Scripting
Hello Everyone,
I'm very new to the shell script. I'm trying to send multiple attachments in unix using uuencode command.
Total I have 3 text files which should be send in mail.
but I'm getting 6 files and 3 files with subject as file name. And the content is
`
end
I'm working... (6 Replies)
Discussion started by: narikivar
6 Replies
8. Linux
Hi,
I am trying to enable rexec to automate certain tasks(it has to be rexec, not ssh or any other due to the system environment), so after switching to linux, I followed the certain instructions that were laid out in the web.
My operating system is fedora 17, so I first installed the... (1 Reply)
Discussion started by: wringer
1 Replies
9. UNIX for Dummies Questions & Answers
Hi There,
---------
file1
-------
~c asd@ac.com
--------------
Now i am using below command
cat file1|mailx -s " testing" -r " My Name" abc@tech.com (3 Replies)
Discussion started by: Tapan Sharma
3 Replies
10. Shell Programming and Scripting
Platform: RHEL 5.4
In the below text file I have strings like following.
$ cat /tmp/mytextfile.txt
DISK1
DISK10
DISK101
DISK102
DISK103
DISK104
DISK105
DISK106
DISK107
DISK108
DISK109
DISK110
DISK111
DISK112
DISK113
DISK114 (8 Replies)
Discussion started by: kraljic
8 Replies
LEARN ABOUT REDHAT
axnet_cs
AXNET_CS(4) Kernel Interfaces Manual AXNET_CS(4)
NAME
axnet_cs - Asix AX88190 chipset PCMCIA Ethernet Driver
SYNOPSIS
insmod axnet_cs.o [pc_debug=n] [irq_list=i,j,...]
DESCRIPTION
Axnet_cs is a driver for PCMCIA ethernet cards based on the Asix AX88190 chipset. These cards are mostly NE2000 compatible but have sev-
eral bugs that are sufficiently tricky to work around that a separate driver was deemed necessary. When this driver is bound to a card, it
allocates the next available ethernet device (eth0..eth#). This device name will be reported in the kernel log file, and passed on to
cardmgr(8).
PARAMETERS
pc_debug=n
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero
value enables debugging.
irq_list=i,j,...
Specifies the set of interrupts that may be allocated by this driver.
DIAGNOSTICS
axnet_cs: this is not an AX88190 card!
Indicates that this card is probably a normal NE2000 compatible card, which requires the pcnet_cs driver.
eth#: interrupt(s) dropped!
Indicates that the driver did not receive an interrupt notification for some reason. The driver will poll the card (with a signifi-
cant performance penalty) if the problem persists. The most likely cause is an interrupt conflict and/or host bridge configuration
problem.
AUTHOR
David Hinds - dahinds@users.sourceforge.net
SEE ALSO
cardmgr(8), pcmcia(5).
pcmcia-cs 2001/08/17 12:51:58 AXNET_CS(4)