data transfer from serial port Post: 302214409

9 More Discussions You Might Find Interesting

1. SCO

Serial File Transfer

I need to transfer files from a sco/unix system to a windows xp system and they are only connected via a digiboard serial connection. The terminal emulation software connects and runs a program but I need to transfer files. Anyone know a good solution?

2. Programming

how i can transfer and receive file in any format over serial port

helo i m using fedora core 6 o.s. i want to develop application using c,c++ which transfer file in any format(like pdf,txt,doc etc) over the serial port and i want to receive the same file from the serial port please guide me. amit

3. SCO

Need some advice concerning file transfer with a serial connection

Hi, I have a SCO Unix ver 5.0.7 from which I need to get some files. The problem is that I'm working remotely (have no physical access) and using Dejawin because this server is only has a serial connection to a Windows machine. Ucopy isn't on the server. What I was thinking is to do a print...

4. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

5. Shell Programming and Scripting

file transfer using AWK over serial port

I have a unix system that only has AWK to program with which hooks up to a windows or linux based system with all progamming and software capabilities. The link between the systems is typically a 9600 baud TTY port on the AWK system and COM1 on the other system. I can cat <filenm> from the unix...

6. Programming

Wrong data with Read from a serial port.

hi, I've a problem on my C/C++ program with Posix Library. I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros: "2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,...

7. Programming

Serial file transfer protocol / checksums

Hello ppl, I'm working on a windows program simulating an existing Unix program, the program is a firmware downloader, it sends a binary firmware file through the serial port (rs232) to a Set-Top Box running under unix system too, as i'm a poor unix user and not a unix programmer i choosed the...

8. Debian

Reading data from a serial port

Dear List - I am trying to capture data from a serial port and write it to a file. /var/www$ cat /dev/ttyS0 > scale_value.html cat: /dev/ttyS0: Device or resource busy /var/www# cat /proc/tty/driver/serial serinfo:1.0 driver revision: 0: uart:16550A port:000003F8 irq:4 tx:90...

9. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

LEARN ABOUT CENTOS

nsd-xfer

nsd-xfer(8)							    nsd 3.2.12							       nsd-xfer(8)

NAME

       nsd-xfer - AXFR client to transfer zones from a name server

SYNOPSIS

       nsd-xfer [-4] [-6] [-a address[@port]] [-p port] [-s serial] [-T tsiginfo] [-v] -z zone -f file servers

DESCRIPTION

       Nsd-xfer is program to transfer zones from a name server using AXFR.  NSD is a complete implementation of an authoritative DNS nameserver.

OPTIONS

       -4     Only send to IPv4 addresses.

       -6     Only send to IPv6 addresses.

       -a address[@port]
	      Specify the source address (and port) to send from.

       -f file
	      The file to store the zone in.

       -p port
	      Specify the port to send to.

       -s serial
	      Specify the serial of the current zone. The zone is only transferred if the master server has a zone with a greater serial number.

       -T tsiginfo
	      Use  TSIG  to verify the zone transfer. The tsiginfo file must contain the TSIG key information. The file is removed upon successful
	      reading of the key. The format of the tsiginfo file is described in the doc/README file (section 3.3).

       -v     Be more verbose.

       -z zone
	      Specify the zone to receive.

       servers
	      List of nameservers to try.

EXAMPLES

       To run this program the standard way type:

       # nsd-xfer -z foobar.cz -f foobar.cz.zone 1.2.3.4

SEE ALSO

       nsd(8), nsdc(8), nsd.conf(5), nsd-checkconf(8), nsd-notify(8), nsd-patch(8), zonec(8)

AUTHORS

       NSD was written by NLnet Labs and RIPE NCC joint team. Please see CREDITS file in the distribution for further details.

NLnet Labs							   jul 19, 2012 						       nsd-xfer(8)