sun Cluster resource group cant failover Post: 302213128

Sponsored Content

Special Forums UNIX and Linux Applications High Performance Computing sun Cluster resource group cant failover Post 302213128 by incredible on Wednesday 9th of July 2008 09:13:04 AM

07-09-2008

Registered User

Perform the following step for each resource group you want to return to the original node.
# clrg switch -h nodename resourcegroup
if your cluster is 3.2 you should not use Network_resources_used any more, just place your logical host in the dependency list.

From the messages I see two probable root causes.
1. The master server installed on shared storage.
2. The master server resource does not depend on the necessary HASP resource.
The problem arises due to a probable misconfiguration.

It is nearly 100% sure that the dependency from the master resource to the underlying HAStoragePlus resourece was missing. The symptoms are classic, if the dependency is missing, RGM calls the validation on the second node. On this node there is no shared storage, so the Agent works as expected. The problem gets fixed if the necessary dependency is added.

incredible

View Public Profile for incredible

Find all posts by incredible

10 More Discussions You Might Find Interesting

1. HP-UX

ServiceGuard cluster & volume group failover

I have a 2-node ServiceGuard cluster. One of the cluster packages has a volume group assigned to it. When I fail the package over to the other node, the volume group does not come up automatically on the other node. I have to manually do a "vgchange -a y vgname" on the node before the package...

2. High Performance Computing

Veritas Cluster Server Management Console IP Failover

I have just completed a first RTFM of "Veritas Cluster Server Management Console Implementation Guide" 5.1, with a view to assessing it to possibly make our working lives easier. Unfortunately, at my organisation, getting a test installation would be worse than pulling teeth, so I can't just go...

3. Solaris

Sun Cluster 3.1 failover

Hi, We have two sun SPARC server in Clustered (Sun Cluster 3.1). For some reason, System 1 failed over to System 2. Where can I find the logs which could tell me the reason for this failover? Thanks

4. AIX

Resource Group Monitoring

Hi, I have a requirement to monitor the HACMP Resource Groups. At present in my environment, if the Resource Groups fail over from preferred node to Secondary node we dont get notification. Can some one help me in creating a scrript. I have more than one RG online. (Max 4 Resource Groups in...

5. Gentoo

How to failover the cluster ?

How to failover the cluster ? GNU/Linux By which command, My Linux version 2008 x86_64 x86_64 x86_64 GNU/Linux What are the prerequisites we need to take while failover ? if any Regards

6. AIX

Adding a Volume Group to an HACMP Resource Group?

Hi, I have a 2 node Cluster. Which is working in active/passive mode (i.e Node#1 is running and when it goes down the Node#2 takes over) Now there's this requirement that we need a mount point say /test that should be available in active node #1 and when node #1 goes down and node#2 takes...

7. Solaris

Sun cluster 4.0 - zone cluster failover doubt

Hello experts - I am planning to install a Sun cluster 4.0 zone cluster fail-over. few basic doubts. (1) Where should i install the cluster s/w binaries ?. ( global zone or the container zone where i am planning to install the zone fail-over) (2) Or should i perform the installation on...

8. Solaris

Solaris Cluster Failover based on scan rate

Dear Experts, If there is a possible Solaris Cluster failover to second node based on scan rate? I need the documentation If solaris cluster can do this. Thank You in Advance Edy

9. Red Hat

Linux Cluster failover issue

Hi Guys, I am not much aware of clusters but i have few questions can someone provide the overview as it would be very helpful for me. How can i perform cluster failover test to see all the services are failing back to other node ? If it is using veritas cluster then what kind of...

10. Solaris

Process to add mount point in Sun Cluster existing HAplus resource

Hi Well I would like to know step by step process of adding a mountpoint in HAPLUS resource in SUN cluster as I go the below command to add a mount point but not the step by step process of adding a mount point in existing HA Plus resource. clrs set -p FileSystemMountPoints+=<new_MP>...

LEARN ABOUT DEBIAN

4s-backend-setup

4S-BACKEND_SETUP(1J)						      4store						      4S-BACKEND_SETUP(1J)

NAME

     4s-backend-setup -- Create a new 4store KB

SYNOPSIS

     4s-backend-setup kbname [--node node-number] [--cluster cluster-size] [--segments segment-count] kb-name

		      --node  Number of this node in the cluster, values range from 0 to cluster-size - 1.  The default is 0.

		      --cluster
			      The number of nodes in the cluster.  The default is 1.

		      --segments
			      The number of segments in the cluster. The default is 2. We recommend one for each CPU core in the cluster as a good
			      starting point. Higher numbers tend to consume more resources, but may result in increased performance.

NOTES

     Once crated with 4s-backend-setup KBs should be started with 4s-backend(1)

SEE ALSO

     4s-query(1), 4s-size(1), 4s-httpd(1), 4s-backend(1), 4s-delete-model(1)

EXAMPLES

     $ 4s-backend-setup --node 0 --cluster 1 --segments 4 demo

     Creates the indexes for a single-machine KB with four segments, named "demo".

4store								   May 31, 2019 							    4store

10 More Discussions You Might Find Interesting

1. HP-UX

ServiceGuard cluster & volume group failover

Discussion started by: Wotan31

2. High Performance Computing

Veritas Cluster Server Management Console IP Failover

Discussion started by: Beast Of Bodmin

3. Solaris

Sun Cluster 3.1 failover

Discussion started by: Mack1982

4. AIX

Resource Group Monitoring

Discussion started by: srnagu