07-09-2008
flar create
Hi,
only two hints:
to copy the partition table from one to an other disk:
prtvtoc /dev/rdsk/c?t?d?s2 | fmthard -s - /dev/rdsk/c?t?d?s2
make the disks bootable:
/usr/sbin/installboot /usr/lib/fs/ufs/bootblk /dev/rdsk/c?t?d?s?
Br Joerg
10 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hi there,
I'm not sure if this is possible, but here is what I'd like to do..
I have an existing 160GB drive in my Redhat 9.0 server that I would like to add an additional 160GB drive to and create a mirrored RAID of the first disk to the new disk. I would like to do this without having to... (2 Replies)
Discussion started by: sysera
2 Replies
2. UNIX for Advanced & Expert Users
Hi all,
this s going to be my 1st time upgrading a disk.I need the ways or steps to migrate data from a 2gb disk to a 4gb disk which sits in the High Availability Disk Array Model 10.the os disk is the internal disk of the K200 system so i dont think i would be meddling around with that.what r... (1 Reply)
Discussion started by: giriplug
1 Replies
3. Filesystems, Disks and Memory
Good morning,
I have a problem replacing a disk with raid-5 volumes.
An hardware error was occurred from a disk c9t3 so all slices were in maintenace. Every slice is part of a raid-5 volume. Any replica is present.
Following Volume manager manual for replacing a disk, I have:
- phisically... (0 Replies)
Discussion started by: bonovox
0 Replies
4. Solaris
Hi All,
I have a SUN ENTERPRISE 3500 server with solaris 10 on it. I have already mirrored root partition.Now i need to mirror two more partitions with 25GB space. But i have only one disk having 70GB space.Total i have 7 disks but each one is of 18 GB only except one. Please find the output of... (2 Replies)
Discussion started by: Renjesh
2 Replies
5. Ubuntu
Hi,
I have an Ubuntu system which I have an faulted mirror.
I trying to replace the disk, but I'm stuck on that it boots and only showing GRUB
GRUB
## ## End Default Options ##
title Ubuntu 8.04.4 LTS, kernel 2.6.24-26-server
root (hd0,0)
kernel ... (0 Replies)
Discussion started by: jld
0 Replies
6. UNIX for Advanced & Expert Users
Good Evening,
2 years ago, I set up an Ubuntu file-server for a friend, who is a photograph amateur. Basically, the server offers a software RAID-5 that can be accessed remotely from a MAC. Unfortunately, I didn't labeled the hard drives (i.e. which physical drive corresponds to the /dev/sdX... (2 Replies)
Discussion started by: Loic Domaigne
2 Replies
7. Solaris
We have hardware RAID configured on Sun-Blade-T6320 and one of the disk got failed. Hence we replaced the failed disk. But the hot swapped disk not recognized by RAID. Kindly help on fixing this issue.
We have 2 LDOM configured on this server and this server running on single disk.
#... (8 Replies)
Discussion started by: rock123
8 Replies
8. AIX
Hello All,
Our servers having emc clarion for the data disks. Is that possible to see those san disks raid level from AIX ?
Am having AIX 6.1 and EMC clarion 5.5.
Regards,
Gowtham.G (3 Replies)
Discussion started by: gowthamakanthan
3 Replies
9. SuSE
Im issuing a cat /proc/mdstat, dmraid -r, and finding a cciss, to know if my server is software raid and hardware raid. But all of them are missing.
What is the other way to know, your disk are raid, your disks is sync, your disk are out of sync, your disk is failed, ASIDE LOOKING AT THEM... (0 Replies)
Discussion started by: invinzin21
0 Replies
10. Solaris
Dear All ,
We need to do patching on one Solaris Server , where we have raid 0 configured.
What is the process to patch a Server if RAID 0 (Concat/Stripe) is there.
Below is the sample output.
# metadb
flags first blk block count
a m pc luo 16 ... (1 Reply)
Discussion started by: jegaraman
1 Replies
LEARN ABOUT MINIX
installboot
installboot(1M) installboot(1M)
NAME
installboot - install bootblocks in a disk partition
SYNOPSIS
installboot bootblk raw-disk-device
The boot(1M) program, ufsboot, is loaded from disk by the bootblock program which resides in the boot area of a disk partition.
The ufs boot objects are platform-dependent, and reside in the /usr/platform/platform-name/lib/fs/ufs directory. The platform name can be
found using the -i option of uname(1).
The installboot utility is a SPARC only program. It is not supported on the architecture. users should use installgrub(1M) instead.
bootblk The name of the bootblock code.
raw-disk-device The name of the disk device onto which the bootblock code is to be installed; it must be a character device which is read-
able and writable. Naming conventions for a SCSI or IPI drive are c?t?d?s? and c?d?s? for an IDE drive.
Example 1: Installing UFS Boot Block
To install a ufs boot block on slice 0 of target 0 on controller 1 of the platform where the command is being run, use:
example# installboot /usr/platform/`uname -i`/lib/fs/ufs/bootblk
/dev/rdsk/c1t0d0s0
/usr/platform/platform-name/lib/fs/ufs
directory where ufs boot objects reside.
/platform/platform-name/ufsboot
second level program to boot from a disk or CD
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
od(1), uname(1), boot(1M), init(1M), kadb(1M), kernel(1M), monitor(1M), reboot(1M), rpc.bootparamd(1M), init.d(4), attributes(5)
WARNINGS
The installboot utility fails if the bootblk or openfirmware files do not exist or if the raw disk device is not a character device.
11 Apr 2005 installboot(1M)