Sponsored Content
Full Discussion: break solaris mirror
Operating Systems Solaris break solaris mirror Post 302208703 by itik on Tuesday 24th of June 2008 03:21:15 PM
Old 06-24-2008
break solaris mirror

Hi All,

How do I break the solaris 8 mirror? And how do I make sure I will point the first hd mirror on reboot.

If the first break mirror won't boot. How do I make the copy mirror to boot?

Thanks in advance,
itik
 

9 More Discussions You Might Find Interesting

1. Solaris

Mirror solaris

Hi everyone. I have a Sun Solaris box which is running on only one internal disk and obviously that is not a good thing, if the disk should fail. This is a pritty straight forward operation in AIX, where my experties are. I have never done this in solaris and would therefore appriciate any help... (3 Replies)
Discussion started by: sprellari
3 Replies

2. Solaris

Disk Mirror in Solaris 9 via Solaris Volume Manager

Hello, I am trying to do mirror in solaris 9. I have total 0-7 disks 4 5 6 7 0 1 2 3 Drive 0 and Drive 4 = Boot Drives Need to Mirror following drives. Drive 1 and Drive 5 = Need to mirror Drive 1 was mounted on: /prod1, /prod2, /prod3, /prod4, /prod5. Then i... (3 Replies)
Discussion started by: deal732
3 Replies

3. HP-UX

Break mirror so that it can be used later

Hello again, We need to install patches to HP-UX B.11.11 but would like to break the mirror it has (with out damaging it) so that in case of failure we can use this a meassure procedure. Any ideas on how to do this Thank you! (2 Replies)
Discussion started by: AQG
2 Replies

4. Solaris

patch update and break mirror

Hi All, How do you know if you need to break the mirror on solaris 8 patch update? Here's the patch example, 117350-54. On the site, it's just a low type update and not a medium or critical. Is breaking a mirror a best practice only or really a requirement to some patch? Thanks, itik (1 Reply)
Discussion started by: itik
1 Replies

5. Solaris

Solaris Volume Manager: Break Mirror and use to make a 2nd machine

Hello: I have a machine built on 2 drives and mirrors have been created to a second set of 2 drives (4 total) on the same platform. SVM. Might anyone provide guidance to create a second machine by breaking the mirrored set, moving the two mirrors (2) to another machine (same platform type),... (1 Reply)
Discussion started by: 4dailyrunner
1 Replies

6. Linux

LVM - break mirror taking out orignal copy

Hi Guys, I have a mirrored LVM volume, and wish to break the mirror leaving only copy1 (effectively removing copy 0). Here's the config: # lvs -a -o +devices lvdata vg01 mwi-ao 2.19T lvdata_mlog 100.00 lvdata_mimage_0(0),lvdata_mimage_1(0) vg01... (0 Replies)
Discussion started by: badoshi
0 Replies

7. Solaris

Solaris patching using mirror disk backup? need help!

hi friends, need help.. it is my first time patching using mirror disk backup approach, not so sure about the steps :confused: how do you detach, patch it, boot it and reattach it ? any kind soul here can advise ? thanks in advance..:) below is the information from my machine: Filesystem ... (3 Replies)
Discussion started by: Exposure
3 Replies

8. Solaris

Healthy mirror on Solaris 10

Dear All I have question and I want some one to answer it .. in Solaris 10 I have two mirrors as below .. c3t0d0s0 & c3t1d0s0 NAME STATE READ WRITE CKSUM rpool ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 ... (1 Reply)
Discussion started by: top.level
1 Replies

9. AIX

AIX break rootvg mirror from system down

Hello, aix 5.2, mirrored rootvg on hdisk0 and hdisk1. hdisk0 is dead. I can boot to cd, into sms, into maintenance mode. I can fsck all the various partitions on hdisk1 (the hd4 hd2 hd3, etc...) all is fine. But without the hdisk0 part of the mirror I cannot get the system to boot. ystem hangs on... (6 Replies)
Discussion started by: sshapiro
6 Replies
metaoffline(1M) 					  System Administration Commands					   metaoffline(1M)

NAME
metaoffline, metaonline - place submirrors offline and online SYNOPSIS
/usr/sbin/metaoffline -h /usr/sbin/metaoffline [-s setname] [-f] mirror submirror /usr/sbin/metaonline -h /usr/sbin/metaonline [-s setname] mirror submirror DESCRIPTION
The metaoffline command prevents Solaris Volume Manager from reading and writing to the submirror that has been taken offline. While the submirror is offline, all writes to the mirror will be kept track of (by region) and will be written when the submirror is brought back online. The metaoffline command can also be used to perform online backups: one submirror is taken offline and backed up while the mirror remains accessible. (However, if this is a two-way mirror, data redundancy is lost while one submirror is offline.) The metaoffline command differs from the metadetach command because it does not sever the logical association between the submirror and the mirror. To completely remove a submirror from a mirror, use the metadetach command. A submirror that has been taken offline will only remain offline until the metaonline command is invoked or the system is rebooted. When the metaonline command is used, reading from and writing to the submirror resumes. A resync is automatically invoked to resync the regions written while the submirror was offline. Writes are directed to the submirror during resync. Reads, however, will come from a dif- ferent submirror. Once the resync operation completes, reads and writes are performed on that submirror. The metaonline command is only effective on a submirror of a mirror that has been taken offline. The metaoffline and metaonline commands can not be used on RAID 1 volumes in application-based recovery (ABR) mode. A submirror that has been taken offline with the metaoffline command can only be mounted as read-only. OPTIONS
Root privileges are required for all of the following options except -h. -f Forces offlining of submirrors that have slices requiring maintenance. -h Displays usage message. -s setname Specifies the name of the diskset on which metaoffline and metaonline will work. Using the -s option will cause the com- mand to perform its administrative function within the specified diskset. Without this option, the command will perform its function on local metadevices. mirror Specifies the metadevice name of the mirror from which the submirror will be either taken offline or put online. submirror Specifies the metadevice name of the submirror to be either taken offline or put online. EXAMPLES
Example 1: Taking a Submirror Offline This example takes one submirror, d9, offline from mirror d10. # metaoffline d10 d9 EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWmdu | +-----------------------------+-----------------------------+ SEE ALSO
mdmonitord(1M), metaclear(1M), metadb(1M), metadetach(1M), metahs(1M), metainit(1M), metaparam(1M), metarecover(1M), metarename(1M), metareplace(1M), metaroot(1M), metaset(1M), metassist(1M), metastat(1M), metasync(1M), metattach(1M), md.tab(4), md.cf(4), mddb.cf(4), md.tab(4), attributes(5), md(7D) Solaris Volume Manager Administration Guide NOTES
The metaonline and metaoffline commands are not applicable to mirrors in application-based recovery (ABR) mode. SunOS 5.10 12 Apr 2004 metaoffline(1M)
All times are GMT -4. The time now is 01:58 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy