"Power cycled the unit" ? Did you reboot? Else run "cfgmgr" and check with "lsdev -Cctape" which might bring something like:
If you see your new device with "Available" it is a good sign - insert a tape check with "dd" or "tctl" if you can send it commands ie. read from it or write to it.
HELP!!
I am having some major problems at present with a HP dat drive under RH9. The drive worked fine previously under RH8, but now does not work.
I am using kernel 2.4.20-30.9 on a i686 athlon intel box.
My messages log shows the below:
Apr 23 11:39:24 devsys kernel: ahc_pci:1:6:0:... (0 Replies)
I will be honest I am quite new to UNIX and Solaris so this may be a simple thing.
I have just purchased a Sun (rebranded HP obviously) DAT DDS3 SCSI tape drive for my Sun Ultra 10 running Solaris 10.
I have previously fitted a SCSI card to the box which has configured ok and can be seen from... (1 Reply)
my server os version is openserver 5.0.6.from past few days it is giving problem while taking backup.it is giving error such that "TAPE WRITE ERROR".anyone can help to come out of this. (3 Replies)
Well I have just added new tape drive to my server (lto)
However I am getting few errors in using it. I have checked status with
#iostat -En : giving me few hard errors, few soft errors and execution error.
Also tape status is not visible as "no sense" its coming as "no additional sense".
I... (5 Replies)
Hi all,
I have solaris 10 sparc running and working very well
but i have problem with external SCSI tape drive DAT 72 problem
it seems to me the tape drive is manufactured by SUN microsystems
when i ran ls -l /dev/rmt/0
it reveals the following output
bash-3.00# mt -f /dev/rmt/0... (2 Replies)
I am trying to build a Sun Ultra 10 with solaris 10. This computer is one of a collection that was donated to the non-profic company I work for. All media was wiped before I recieved them, so I am starting from stratch.
I downloaded the Solaris 10 ISO and burned a DVD. The computer came with a... (4 Replies)
Hi ,
I would like to access the cd drive of , i have power series server , and have lpars .
I try to install AIX in an lpar via HMC, but it can't access the cd drive.
how i can make installtion or make the the cd drive accessible in hmc or in power series server?
Thanks in advance (2 Replies)
How to use 'ls' command to list files like *.dat, not *.*.dat (5 Replies)
Discussion started by: pmcginni777
5 Replies
LEARN ABOUT REDHAT
lsdev
LSDEV(8) Linux System Manual LSDEV(8)NAME
lsdev - display information about installed hardware
SYNOPSIS
lsdev
DESCRIPTION
lsdev gathers information about your computer's installed hardware from the interrupts, ioports and dma files in the /proc directory, thus
giving you a quick overview of which hardware uses what I/O addresses and what IRQ and DMA channels.
OPTIONS
None.
FILES
/proc/interrupts
IRQ channels.
/proc/ioports
I/O memory addresses.
/proc/dma
DMA channels.
BUGS
lsdev can't always figure out which lines in the three examined files refer to one and the same device, because these files sometimes use
different names for the same piece of hardware. For example, in some kernels the keyboard is referred to as `kbd' in /proc/ioports and as
`keyboard' in /proc/interrupts. This should be fixed in the kernel, not in lsdev (as has indeed happened for this particular example).
The program does however try to match lines by stripping anything after a space or open parenthesis from the name, so that e.g. the
`serial' lines from /proc/interrupts match the `serial(set)' lines from /proc/ioports. This attempt at DWIM might be considered a bug in
itself.
This program only shows the kernel's idea of what hardware is present, not what's actually physically available.
SEE ALSO procinfo(8).
AUTHOR
Sander van Malssen <svm@kozmix.cistron.nl>
3rd Release 1998-05-31 LSDEV(8)