I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
Basically forwarding everything coming on eth1 for port 1521 to 10.218.146.230 (which is eth0).
I want to set up this configuration on solaris as well using ipfilters. I have tried following many documents on the net. But none seem to work. Please guide me as to the steps and configuration required to achieve the same on solaris or at least the equivalent commands.
PS: I am not that fluent in Solaris as in Linux. Nor have I worked with ipfilters before - always worked with iptables.
I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi friends
i have the following setup
machine1 two network adapters one connected to lan the other connected directly to machine2
machine2 is not connected to lan
i need to access machine2 directly from the LAN
how to force machine1 to forward all traffic received on a specific port the... (1 Reply)
Hi,
I am looking out a way to forward all UDP traffic coming on ports 3001,3002,3003 and 3004 on server 10.2.45.200
to
corresponding ports of server 10.2.45.197.
I am using Solaris 10.0.
-bash-3.00$ uname -a
SunOS airtelussd2 5.10 Generic_127127-11 sun4u sparc SUNW,Sun-Fire-V445
Is... (6 Replies)
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
hi guys
i have a simple question !
i have two ips . a valid and internal(172.16.11.2)
i want to use port forwarding to forward any request to valid IP port 8001 to internal ip port 80 .
i use this rule :
sysctl -w net.ipv4.ip_forward=1
iptables -t nat -A PREROUTING -p tcp... (1 Reply)
Hi experts,
We have windows machine ( A ) in one network & 2 Linux Servers ( B & C ) in another network. There is a firewall between these 2 networks and SSH (TCP/22) & HTTPS (TCP/443) are allowed from A to B only (but not to C). There is no personal firewall / iptables running on any machine.... (1 Reply)
Hello Gurus,
I have configured port forwarding at router.
But after configuration I am not able to connect the computer from outside/Over internet/Remote desktp from other computer.
Could you please advice?
Thanks-
Pokhraj (2 Replies)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT SUSE
iptables-xml
IPTABLES-XML(8)IPTABLES-XML(8)NAME
iptables-xml -- Convert iptables-save format to XML
SYNOPSIS
iptables-xml [-c] [-v]
DESCRIPTION
iptables-xml is used to convert the output of iptables-save into an easily manipulatable XML format to STDOUT. Use I/O-redirection pro-
vided by your shell to write to a file.
-c, --combine
combine consecutive rules with the same matches but different targets. iptables does not currently support more than one target per
match, so this simulates that by collecting the targets from consecutive iptables rules into one action tag, but only when the rule
matches are identical. Terminating actions like RETURN, DROP, ACCEPT and QUEUE are not combined with subsequent targets.
-v, --verbose
Output xml comments containing the iptables line from which the XML is derived
iptables-xml does a mechanistic conversion to a very expressive xml format; the only semantic considerations are for -g and -j targets in
order to discriminate between <call> <goto> and <nane-of-target> as it helps xml processing scripts if they can tell the difference between
a target like SNAT and another chain.
Some sample output is:
<iptables-rules>
<table name="mangle">
<chain name="PREROUTING" policy="ACCEPT" packet-count="63436" byte-count="7137573">
<rule>
<conditions>
<match>
<p>tcp</p>
</match>
<tcp>
<sport>8443</sport>
</tcp>
</conditions>
<actions>
<call>
<check_ip/>
</call>
<ACCEPT/>
</actions>
</rule>
</chain>
</table> </iptables-rules>
Conversion from XML to iptables-save format may be done using the iptables.xslt script and xsltproc, or a custom program using libxsltproc
or similar; in this fashion:
xsltproc iptables.xslt my-iptables.xml | iptables-restore
BUGS
None known as of iptables-1.3.7 release
AUTHOR
Sam Liddicott <azez@ufomechanic.net>
SEE ALSO iptables-save(8), iptables-restore(8), iptables(8)
Jul 16, 2007 IPTABLES-XML(8)